diff --git a/source/_posts/2018-06-04-esphomelib.markdown b/source/_posts/2018-06-04-esphomelib.markdown
index 53c53ccbb39..3c68102ea4a 100644
--- a/source/_posts/2018-06-04-esphomelib.markdown
+++ b/source/_posts/2018-06-04-esphomelib.markdown
@@ -59,7 +59,7 @@ At this point, you can already flash the firmware. To do this, first plug in the
 
 ## Adding some basic functionality
 
-Above configuration is, let’s face it, pretty dull. It really only connects to WiFi and MQTT and sits idle. So let’s add a basic [GPIO switch](https://esphomelib.com/esphomeyaml/integrations/switch/gpio.html)! The GPIO switch component in esphomelib allows you to control the ON/OFF state of any of the pins on your ESP. For example, if you add this configuration to the bottom of your YAML file, you’re setting up the pin `GPIO5` to be controlled as a switch with the name "Living Room Dehumidifer".
+Above configuration is, let’s face it, pretty dull. It really only connects to WiFi and MQTT and sits idle. So let’s add a basic [GPIO switch](https://esphome.io/components/switch/gpio.html)! The GPIO switch component in esphomelib allows you to control the ON/OFF state of any of the pins on your ESP. For example, if you add this configuration to the bottom of your YAML file, you’re setting up the pin `GPIO5` to be controlled as a switch with the name "Living Room Dehumidifer".
 
 ```yaml
 switch: