Add support for enocean window handle FA 10 00 (Hoppe) (#11499)

* home assistant documentation change for PR29968

Add documentation description for home assistant PR 29968 https://github.com/home-assistant/home-assistant/pull/29968 to describe window handle setup in configuration.yaml file

* ✏️ Tweak

* Update source/_integrations/enocean.markdown

accepted review improvement proposal

Co-Authored-By: Franck Nijhof <frenck@frenck.nl>

Co-authored-by: Klaas Schoute <klaas_schoute@hotmail.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>

source/_integrations/enocean.markdown

@@ -19,7 +19,7 @@ The `enocean` integration adds support for some of these devices. You will need
 There is currently support for the following device types within Home Assistant:
 
 - [Binary Sensor](#binary-sensor) - Wall switches
-- [Sensor](#sensor) - Power meters, temperature sensors and humidity sensors
+- [Sensor](#sensor) - Power meters, temperature sensors, humidity sensors and window handles
 - [Light](#light) - Dimmers
 - [Switch](#switch)
 
@@ -32,7 +32,7 @@ The following devices have been confirmed to work out of the box:
 - Omnio WS-CH-102-L-rw battery-less wall switch
 - Permundo PSC234 (switch and power monitor)
 - EnOcean STM-330 temperature sensor
-
+- Hoppe SecuSignal window handle from Somfy
 
 If you own a device not listed here, please check whether your device can talk in one of the listed [EnOcean Equipment Profiles](https://www.enocean-alliance.org/what-is-enocean/specifications/) (EEP). 
 If it does, it will most likely work. 
@@ -160,6 +160,7 @@ The EnOcean sensor platform currently supports the following device types:
  * [power sensor](#power-sensor)
  * [humidity sensor](#humidity-sensor)
  * [temperature sensor](#temperature-sensor)
+ * [window handle](#window-handle)
  
 To use your EnOcean device, you first have to set up your [EnOcean hub](#hub) and then add the following to your `configuration.yaml` file:
 
@@ -188,7 +189,6 @@ device_class:
   default: powersensor
 {% endconfiguration %}
 
-
 ### Power sensor
 
 This has been tested with a Permundo PSC234 switch, but any device sending EEP **A5-12-01** messages will work.
@@ -204,7 +204,6 @@ sensor:
     device_class: powersensor
 ```
 
-
 ### Humidity sensor
 
 The following [EnOcean Equipment Profiles](https://www.enocean-alliance.org/what-is-enocean/specifications/) are supported:
@@ -298,6 +297,29 @@ sensor:
     range_max: 250
 ```
 
+### Window handle
+
+As of now, the Hoppe SecuSignal window handle from Somfy has been successfully tested. However, any mechanical window handle that follows the EnOcean RPS telegram spec F6 10 00 (Hoppe AG) is supported.
+
+To configure a window handle, add the following code to your `configuration.yaml`:
+
+```yaml
+# Example configuration.yaml entry for window handle EEP F6-10-00
+sensor:
+  - name: Living Room Window Handle
+    platform: enocean
+    id: [0xDE,0xAD,0xBE,0xEF]
+    device_class: windowhandle
+```
+
+The configuration does not have any optional parameters.
+
+The window handle sensor can have the following states:
+
+- **closed**: The window handle is in closed position (typically down, or 6 o'clock)
+- **open**: The window handle is in open position (typically left or right, or 3 o'clock or 9 o'clock)
+- **tilt**: The window handle is in tilt position (typically up or 12 o'clock)
+
 ## Switch
 
 An EnOcean switch can take many forms. Currently, only a few types have been tested: Permundo PSC234 and Nod On SIN-2-1-01.