From 816274cbe4b4ccd4fc47518fcc8661f16ceee1e3 Mon Sep 17 00:00:00 2001 From: Arie Catsman <120491684+catsmanac@users.noreply.github.com> Date: Mon, 27 May 2024 11:07:06 +0200 Subject: [PATCH] Add reconfigure for enphase_envoy (#32364) Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com> --- source/_integrations/enphase_envoy.markdown | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/source/_integrations/enphase_envoy.markdown b/source/_integrations/enphase_envoy.markdown index 23ac218c5ff..e2f106dd553 100644 --- a/source/_integrations/enphase_envoy.markdown +++ b/source/_integrations/enphase_envoy.markdown @@ -91,9 +91,11 @@ When the relay mode is set to battery level, the relays will turn on and off bas The default polling interval is 60 seconds. To customize the polling interval, refer to [defining a custom polling interval](/common-tasks/general/#defining-a-custom-polling-interval). Specify one single entity from the envoy device as target of the service using the `+ choose entity` button. Updating one entity will update all entities of the Envoy and the related devices like the inverters; there is no need to specify multiple or all entities or add (all) inverter entities. When using multiple Envoys, add one entity for each envoy as targets or create separate custom polling intervals with a single entity as needed. -## Credentials update +## Credentials or device IP address update -This integration supports updating configuration by re-adding the integration and specifying the same or new IP address, username, and password. Use this method if your Enlighten credentials or the device's IP address has changed and needs to be updated. +This integration supports updating the Envoy configuration through a `reconfigure` menu option. The reconfiguration allows for changing the Envoy IP address, username, and/or password. Use this menu option if your Enlighten credentials or the device's IP address has changed and needs to be manually updated. The latter is typically automatically detected and updated. + +Use this menu option also when an Envoy firmware upgrade requires a switch from local Envoy username/password to token-based authentication with Enlighten username/password (refer to [authentication requirements](#envoy-authentication-requirements)). ## Energy dashboard