diff --git a/source/_components/camera.foscam.markdown b/source/_components/camera.foscam.markdown
index c86175ce67f..906fb622a1b 100644
--- a/source/_components/camera.foscam.markdown
+++ b/source/_components/camera.foscam.markdown
@@ -37,48 +37,4 @@ Configuration variables:
   - **Note**: There seems to be some issues within Foscam with lengthy passwords and passwords containing certain symbols. Be sure to check your camera's documentation.
  
 ### {% linkable_title Control Foscam PTZ (Pan/Tilt/Zoom) - Home/Away %}
- Foscam Webcams which support CGI Commands ([Source](http://www.ipcamcontrol.net/files/Foscam%20IPCamera%20CGI%20User%20Guide-V1.0.4.pdf)) can be controlled by Home Assistant. The following outlines examples of the switch, services, and scripts required to move between 2 preset destinations while controlling motion detection, but many other options of movement are provided in the Foscam CGI User Guide linked above.
-
-The switch.foscam_motion will control whether the motion detection is on or off. This switch supports statecmd, which checks the current state of motion detection.
-
-The service shell_command.foscam_turn_off sets the camera to point down and away to indicate it is not recording.
-The service shell_command.foscam_turn_on sets the camera to point where I'd like to record.
-Both of these services require preset points to be added to your camera. See source above for additional information.
-
-The script.foscam_off and script.foscam_on can be used to set the motion detection appropriately, and then move the camera. These scripts can be called as part of an automation with device_tracker triggers to set home and not_home modes for your Foscam and disable motion detection recording while home.
-
-```yaml
-# Replace admin and password with an "Admin" priviledged Foscam user
-# Replace ipaddress with the local IP address of your Foscam
-switch:
-  platform: command_line
-  switches:
-    #Switch for Foscam Motion Detection
-    foscam_motion:
-      oncmd: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=1&usr=admin&pwd=password"'
-      offcmd: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=0&usr=admin&pwd=password"'
-      statecmd: 'curl -k --silent "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=getMotionDetectConfig&usr=admin&pwd=password" | grep -oP "(?<=isEnable>).*?(?=</isEnable>)"'
-      value_template: '{{ value == "1" }}'
-
-shell_command:
-  #Created a preset point in Foscam Web Interface named Off which essentially points the camera down and away
-  foscam_turn_off: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Off&usr=admin&pwd=password"'
-  #Created a preset point in Foscam Web Interface named Main which points in the direction I would like to record
-  foscam_turn_on: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Main&usr=admin&pwd=password"'
-script:
-  foscam_off:
-    sequence:
-    - execute_service: switch.turn_off
-      service_data:
-        entity_id: switch.foscam_motion
-    - service: shell_command.foscam_turn_off
-  foscam_on:
-    sequence:
-    - execute_service: switch.turn_off
-      service_data:
-        entity_id: switch.foscam_motion
-    - service: shell_command.foscam_turn_on
-    - execute_service: switch.turn_on
-      service_data:
-        entity_id: switch.foscam_motion
-```
+ Foscam Webcams which support CGI Commands can be controlled by Home Assistant ([Source](http://www.ipcamcontrol.net/files/Foscam%20IPCamera%20CGI%20User%20Guide-V1.0.4.pdf)). For an example of how this can be done, see the [Foscam IP Camera Pan, Tilt, Zoom Control](/cookbook/foscam_away_mode_PTZ/) Cookbook entry.