From 8384911a4770f6d4b75098b5fe62b4d15d1e1dbf Mon Sep 17 00:00:00 2001 From: "Barry vd. Heuvel" Date: Sun, 22 Dec 2024 20:39:24 +0100 Subject: [PATCH] Add Indoor Unit states (#36479) --- source/_integrations/weheat.markdown | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/source/_integrations/weheat.markdown b/source/_integrations/weheat.markdown index 91e5256fae4..4d383d6666d 100644 --- a/source/_integrations/weheat.markdown +++ b/source/_integrations/weheat.markdown @@ -51,3 +51,11 @@ The Weheat integration provides the following sensors: - **DHW bottom temperature"**: The domestic hot water temperature in the bottom of the vessel in °C (optional) - **Compressor RPM**: The rpm of the compressor fan. - **Compressor percentage**: The percentage of the compressor fan. Can exceed 100% for some models. + +Depending on the model/installation, states for the Indoor Unit states are available: + +- **Indoor unit water pump** +- **Indoor unit auxiliary water pump** +- **Indoor unit DHW valve or water pump** +- **Indoor unit gas boiler heating allowed** - Note: This may be True even when no gas boiler is installed or active at this time. +- **Indoor unit electric heater**