Vizio SmartCat TV support (#2906)

* Vizio SmartCat TV support

* Minor style changes
This commit is contained in:
Vlad Korniev 2017-07-11 14:00:17 -07:00 committed by Fabian Affolter
parent 88ba25a12b
commit 843a89816b
2 changed files with 93 additions and 0 deletions

View File

@ -0,0 +1,93 @@
---
layout: page
title: "Vizio SmartCast TV"
description: "Instructions how to integrate Vizio SmartCast TV into Home Assistant."
date: 2017-07-10 19:00
sidebar: true
comments: false
sharing: true
footer: true
logo: vizio-smartcast.png
ha_category: Media Player
featured: true
ha_release: 0.49
ha_iot_class: "Local Polling"
---
The `vizio` component will allow you to control [SmartCast](https://www.vizio.com/smartcast-app) compatible TVs (2016+ models).
## Pairing
Before adding TV to Home Assistant you'll need to pair it manually, to do so follow these steps:
Install the command-line tool using pip (you can choose to download it manually):
```bash
$ pip3 install git+https://github.com/vkorn/pyvizio.git@master
$ pip3 install -I .
```
Make sure that your TV is on, as sometimes it won't show PIN code if it wasn't on during pairing initialization.
If you don't know IP address of your TV run following command:
```bash
$ pyvizio --ip=0 --auth=0 discover
```
Initiate pairing:
```bash
$ pyvizio --ip={ip} pair
```
Initiation will show you two different values:
| Value | Description |
|:----------------|:---------------------|
| Challenge type | Usually it's should be `"1"`, if it's not the case for you, use additional parameter `--ch_type=your_type` in the next step |
| Challenge token | Token required to finalize pairing in the next step |
Finally, at this point PIN code should be displayed at the top of your TV. With all these values, you can now finish pairing:
```bash
$ pyvizio --ip={ip} pair_finish --token={challenge_token} --pin={tv_pin}
```
You will need authentication token returned by this command to configure Home Assistant.
## Configuration
To add your Vizio TV to your installation, add following to your `configuration.yaml` file:
```yaml
# Example configuration.yaml entry
media_player:
- platform: vizio
host: IP_ADDRESS
access_token: AUTH_TOKEN
```
Configuration variables:
- **host** (*Required*): IP address of your TV.
- **access_token** (*Required*): Authentication token you've received in last step of the pairing process.
## Notes and limitations
### Turning TV on
If you do have `Power Mode` of your TV configured to be `Eco Mode`, turning device ON won't work.
### Changing tracks
Changing tracks works like channels switching. If you have source other than regular TV it might end do nothing.
### Sources
Source list shows all external devices connected to the TV through HDMI plus list of internal devices (TV mode, Chrome Cast, etc.).
<p class='note'>
Vizio SmartCast service is accessible through HTTPS with self-signed certificate. It means that if you have low LOGLEVEL in your Home Assistant configuration, you'll see a lot of warnings like this `InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised.`
As an option, you could proxy all calls for example through NGINX.
</p>

Binary file not shown.

After

Width:  |  Height:  |  Size: 34 KiB