diff --git a/source/_cookbook/foscam_away_mode_PTZ.markdown b/source/_cookbook/foscam_away_mode_PTZ.markdown
index 08f504e9d7f..3ac9578ccce 100644
--- a/source/_cookbook/foscam_away_mode_PTZ.markdown
+++ b/source/_cookbook/foscam_away_mode_PTZ.markdown
@@ -9,12 +9,14 @@ sharing: true
 footer: true
 ha_category: Automation Examples
 ---
+
 This requires a [Foscam IP Camera](/components/camera.foscam/) camera with PTZ (Pan, Tilt, Zoom) and CGI functionality ([Source](http://www.ipcamcontrol.net/files/Foscam%20IPCamera%20CGI%20User%20Guide-V1.0.4.pdf)) 
 
 Foscam Cameras can be controlled by Home Assistant through a number of CGI commands. 
 The following outlines examples of the switch, services, and scripts required to move between 2 preset destinations while controlling motion detection, but many other options of movement are provided in the Foscam CGI User Guide linked above.
 
 The `switch.foscam_motion` will control whether the motion detection is on or off. This switch supports `statecmd`, which checks the current state of motion detection.
+
 ```yaml
 # Replace admin and password with an "Admin" priviledged Foscam user
 # Replace ipaddress with the local IP address of your Foscam
@@ -27,17 +29,20 @@ switch:
      offcmd: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=0&usr=admin&pwd=password"'
      statecmd: 'curl -k --silent "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=getMotionDetectConfig&usr=admin&pwd=password" | grep -oP "(?<=isEnable>).*?(?=</isEnable>)"'
      value_template: '{{ value == "1" }}'
- ```
+```
  
- The service `shell_command.foscam_turn_off` sets the camera to point down and away to indicate it is not recording, and `shell_command.foscam_turn_on` sets the camera to point where I'd like to record. h of these services require preset points to be added to your camera. See source above for additional information.
- ```yaml
- shell_command:
-   #Created a preset point in Foscam Web Interface named Off which essentially points the camera down and away
-   foscam_turn_off: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Off&usr=admin&pwd=password"'
-   #Created a preset point in Foscam Web Interface named Main which points in the direction I would like to record
-   foscam_turn_on: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Main&usr=admin&pwd=password"'
- ```
- The `script.foscam_off` and `script.foscam_on` can be used to set the motion detection appropriately, and then move the camera. These scripts can be called as part of an automation with `device_tracker` triggers to set `home` and `not_home` modes for your Foscam and disable motion detection recording while `home`.
+The service `shell_command.foscam_turn_off` sets the camera to point down and away to indicate it is not recording, and `shell_command.foscam_turn_on` sets the camera to point where I'd like to record. h of these services require preset points to be added to your camera. See source above for additional information.
+
+```yaml
+shell_command:
+  #Created a preset point in Foscam Web Interface named Off which essentially points the camera down and away
+  foscam_turn_off: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Off&usr=admin&pwd=password"'
+  #Created a preset point in Foscam Web Interface named Main which points in the direction I would like to record
+  foscam_turn_on: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Main&usr=admin&pwd=password"'
+```
+
+The `script.foscam_off` and `script.foscam_on` can be used to set the motion detection appropriately, and then move the camera. These scripts can be called as part of an automation with `device_tracker` triggers to set `home` and `not_home` modes for your Foscam and disable motion detection recording while `home`.
+
 ```yaml
 script:
  foscam_off:
@@ -75,3 +80,5 @@ automation:
       to: 'home'
     action:
       service: script.foscam_off
+```
+