diff --git a/source/images/assist/esp32-atom_silence_detection_01.png b/source/images/assist/esp32-atom_silence_detection_01.png
new file mode 100644
index 00000000000..4ec2894477b
Binary files /dev/null and b/source/images/assist/esp32-atom_silence_detection_01.png differ
diff --git a/source/voice_control/thirteen-usd-voice-remote.markdown b/source/voice_control/thirteen-usd-voice-remote.markdown
index 0154d97e336..c999d65c422 100644
--- a/source/voice_control/thirteen-usd-voice-remote.markdown
+++ b/source/voice_control/thirteen-usd-voice-remote.markdown
@@ -57,7 +57,7 @@ Before you can use this device with Home Assistant, you need to install a bit of
    ![New ESPHome device discovered](/images/assist/m5stack-atom-echo-discovered-33.png)
 8. Select the **ESPHome** integration. Under **Devices**, you should see the **M5Stack Atom Echo** listed.
    ![ATOM Echo discovered](/images/assist/m5stack-atom-echo-discovered-new-03.png)
-   - Your ATOM Echo is connected to Home Assistant over Wi-Fi. You can now move it to any place in your home with a USB power supply. 
+   - Your ATOM Echo is connected to Home Assistant over Wi-Fi. You can now move it to any place in your home with a USB power supply.
 9. Congratulations! You can now voice control Home Assistant using a button with a built-in microphone. Now give some commands.
 
 ## Controlling Home Assistant over the ATOM Echo
@@ -73,6 +73,11 @@ Before you can use this device with Home Assistant, you need to install a bit of
           - *Is the front door locked?*
           - *Which lights are on in the living room?*
 3. Your command is not supported? Add your own commands using [a sentence trigger](/voice_control/custom_sentences/).
+4. You find ATOM Echo takes to long to start processing your command?
+   - Adjust the silence detection settings. This setting defines how much silence is needed for Assist to find you're done speaking and it can start processing your command.
+   - Go to {% my integrations title="**Settings** > **Devices & Services**" %} and select the **ESPHome** integration.
+   - Under **M5Stack ATOM Echo**, select **1 device**.
+   ![Open My link](/images/assist/esp32-atom_silence_detection_01.png)
 
 ## Troubleshooting