Add configuration_basic, move Add integration button to the top (#37435)

* Add configuration_basic, move Add integration button to the top

* fix indents in config block

---------

Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
This commit is contained in:
Jonas Fors Lellky 2025-02-13 08:12:38 +01:00 committed by GitHub
parent b6dc21bf0c
commit 86a9aa2986
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194

View File

@ -34,6 +34,15 @@ To configure the integration, you need to obtain the IP address and Device ID fo
5. Go to **More** > **Installer** > **Communication** > **BACnet settings**.
6. Note down the **IP address** and **Device ID**.
{% include integrations/config_flow.md %}
{% configuration_basic %}
IP address:
description: "The IP address of your Flexit Nordic device."
Device ID:
description: "The Device ID of your Flexit Nordic device. This is usually 2."
{% endconfiguration_basic %}
## Platforms
This integration supports the following platforms.
@ -90,8 +99,6 @@ If you need to shut down the unit, make sure to take all necessary precautions,
Furthermore, Flexit recommends unplugging the unit from the power socket before replacing a filter. To prevent damage, always initiate a controlled shutdown from the control panel (or, in the future, from an action in Home Assistant) before unplugging the device.
{% include integrations/config_flow.md %}
## Removing the integration
This integration follows standard integration removal. No extra steps are required.