diff --git a/source/_integrations/pi4ioe5v9xxxx.markdown b/source/_integrations/pi4ioe5v9xxxx.markdown
new file mode 100644
index 00000000000..8343beb4416
--- /dev/null
+++ b/source/_integrations/pi4ioe5v9xxxx.markdown
@@ -0,0 +1,135 @@
+---
+title: "pi4ioe5v9xxxx IO Expander"
+description: "Instructions on how to integrate the pi4ioe5v9xxxx IO pin expander with I2C interface into Home Assistant."
+logo: diodes.png
+ha_category:
+  - DIY
+  - Binary Sensor
+  - Switch
+ha_release: 0.109
+ha_iot_class: Local Polling
+---
+
+The `pi4ioe5v9xxxx` integration provides support for the quasi-bidirectional devices PI4IOE5V9570, PI4IOE5V9674, PI4IOE5V9673, PI4IOE5V96224 and PI4IOE5V96248 from digital.com.
+
+For more details about the pi4ioe5v9xxxx I2C I/O port expander you can find the datasheets here:
+- [PI4IOE5V9570](https://www.diodes.com/assets/Datasheets/PI4IOE5V9570.pdf)
+- [PI4IOE5V9674](https://www.diodes.com/assets/Datasheets/PI4IOE5V9674.pdf)
+- [PI4IOE5V9673](https://www.diodes.com/assets/Datasheets/PI4IOE5V9673.pdf)
+- [PI4IOE5V96224](https://www.diodes.com/assets/Datasheets/PI4IOE5V96224.pdf)
+- [PI4IOE5V96248](https://www.diodes.com/assets/Datasheets/PI4IOE5V96248.pdf).
+
+## Binary Sensor
+
+The `pi4ioe5v9xxxx` binary sensor platform allows you to read sensor values from the I/O pins of your I/O expander.
+
+The pin numbers are from 1 to X where: 1-8 correspond to port 0 (00-07) and 9-16 to port 1, etc.
+
+### Configuration
+
+To use the I/O pins of an pi4ioe5v9xxxx connected to an I2C bus of your Raspberry Pi as binary sensors, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+binary_sensor:
+- platform: pi4ioe5v9xxxx
+  pins:
+    1: Pin_01/PI0_0
+    2: Pin_02/PI0_1
+    3: Pin_03/PI0_2
+    4: Pin_04/PI0_3
+    5: Pin_05/PI0_4
+    6: Pin_06/PI0_5
+    7: Pin_07/PI0_6
+    8: Pin_08/PI0_7
+```
+
+{% configuration %}
+pins:
+  description: List of used pins.
+  required: true
+  type: map
+  keys:
+    "pin: name":
+      description: The pin numbers (from 1 to X) and corresponding names.
+      required: true
+      type: [integer, string]
+i2c_bus:
+  description: i2c bus containing the pi4ioe5v9xxxx chip.
+  required: false
+  type: integer
+  default: "`1`"
+i2c_address:
+  description: i2c address of pi4ioe5v9xxxx chip.
+  required: false
+  type: integer
+  default: "`0x20`"
+bits:
+  description: number of bits of pi4ioe5v9xxxx chip, see particular datasheet for your device for the right number.
+  required: false
+  type: integer
+  default: "`24`"
+invert_logic:
+  description: If `true`, inverts the input logic to ACTIVE LOW.
+  required: false
+  type: boolean
+  default: "`false` (ACTIVE HIGH)"
+{% endconfiguration %}
+
+
+## Switch
+
+The `pi4ioe5v9xxxx` switch platform allows you to write to the I/O pins of your I2C I/O expander.
+
+The pin numbers are from 1 to X, where 1-8 correspond to port A (A1-A8) and 9-16 to port B (B1-B8), etc.
+
+### Configuration
+
+To use the I/O pins of an pi4ioe5v9xxxx connected to an I2C bus as switches, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+switch:
+  - platform: pi4ioe5v9xxxx
+    pins:
+     1: Pin_01/PI0_0
+     2: Pin_02/PI0_1
+     3: Pin_03/PI0_2
+     4: Pin_04/PI0_3
+     5: Pin_05/PI0_4
+     6: Pin_06/PI0_5
+     7: Pin_07/PI0_6
+     8: Pin_08/PI0_7
+```
+
+{% configuration %}
+pins:
+  description: List of used pins.
+  required: true
+  type: map
+  keys:
+    "pin: name":
+      description: The pin numbers (from 1 to X) and corresponding names.
+      required: true
+      type: [integer, string]
+i2c_bus:
+  description: i2c bus containing the pi4ioe5v9xxxx chip.
+  required: false
+  type: integer
+  default: "`1`"
+i2c_address:
+  description: i2c address of pi4ioe5v9xxxx chip.
+  required: false
+  type: integer
+  default: "`0x20`"
+bits:
+  description: number of bits of pi4ioe5v9xxxx chip, see particular datasheet for your device for the right number.
+  required: false
+  type: integer
+  default: "`24`"
+invert_logic:
+  description: If `true`, inverts the output logic to ACTIVE LOW.
+  required: false
+  type: boolean
+  default: "`false` (ACTIVE HIGH)"
+{% endconfiguration %}
diff --git a/source/images/supported_brands/diodes.png b/source/images/supported_brands/diodes.png
new file mode 100644
index 00000000000..2608e875de9
Binary files /dev/null and b/source/images/supported_brands/diodes.png differ