diff --git a/source/_components/litejet.markdown b/source/_components/litejet.markdown
index bfd94902d09..f2c4db330e8 100644
--- a/source/_components/litejet.markdown
+++ b/source/_components/litejet.markdown
@@ -8,10 +8,11 @@ comments: false
 sharing: true
 footer: true
 ha_category: Hub
-featured: true
+ha_iot_class: "Local Polling"
+ha_release: 0.32
 ---
 
-LiteJet is a centralized lighting system that predates most home automation technology. All lights and wall switches are wired to a central panel. This central panel has a sierial port interface that allows a computer to control the system via LiteJet's third party protocol.
+LiteJet is a centralized lighting system that predates most home automation technology. All lights and wall switches are wired to a central panel. This central panel has a serial port interface that allows a computer to control the system via LiteJet's third party protocol.
 
 Home Assistant integrates the LiteJet 3rd party protocol and allows you to get the status and control the connected lights.
 
@@ -19,13 +20,25 @@ After connecting the LiteJet's RS232-2 port to your computer, add the following
 
 ```yaml
 litejet:
-  url: /dev/serial/by-id/THE-PATH-OF-YOUR-SERIAL-PORT
+  port: /dev/serial/by-id/THE-PATH-OF-YOUR-SERIAL-PORT
 ```
 
 Your LiteJet MCP should be configured for 19.2 K baud, 8 data bits, 1 stop bit, no parity, and to transmit a 'CR' after each response. These settings can be configured using the [LiteJet programming software](https://www.centralite.com/helpdesk/knowledgebase.php?article=735).
 
 You can also configure the Home Assistant to ignore lights, scenes, and switches via their name. This is highly recommended since LiteJet has a fixed number of each of these and with most systems many will be unused.
 
+```yaml
+litejet:
+```
+
+Configuration variables:
+
+- **port** (*Required*): The path to the serial port connected to the LiteJet.
+- **exclude_names** (*Optional*): A list of light or switch names that should be ignored.
+- **include_switches** (*Optional*): Cause entities to be created for all the LiteJet switches. Default is `false`. This can be useful when debugging your lighting as you can press/release switches remotely.
+
+
+
 ```yaml
 litejet:
   exclude_names:
@@ -36,9 +49,3 @@ litejet:
   - 'LV Rel #'
   - 'Fan #'
 ```
-
-Configuration variables:
-
-- **url** (*Required*): The path to the serial port connected to the LiteJet.
-- **exclude_names** (*Optional*): A list of light or switch names that should be ignored.
-- **include_switches** (*Optional*): Cause entities to be created for all the LiteJet switches. Default is false. This can be useful when debugging your lighting as you can press/release switches remotely.
diff --git a/source/_components/switch.litejet.markdown b/source/_components/switch.litejet.markdown
index 90bd86542dc..22c4d9d65f5 100644
--- a/source/_components/switch.litejet.markdown
+++ b/source/_components/switch.litejet.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 ha_category: Switch
 ha_release: 0.32
+ha_iot_class: "Local Polling"
 ---
 
 To get your LiteJet switches working with Home Assistant, follow the instructions for the general [LiteJet component](/components/litejet/).