Update Raspberry Pi GPIO Binary Sensor configuration (#6999)

* Update Raspberry Pi GPIO Binary Sensor configuration

* Update binary_sensor.rpi_gpio.markdown

* Update binary_sensor.rpi_gpio.markdown

* Minor change
This commit is contained in:
Jorim Tielemans 2018-10-22 23:29:17 +02:00 committed by Fabian Affolter
parent 378552e3ed
commit 920549e7e8

View File

@ -28,13 +28,33 @@ binary_sensor:
12: PIR Bedroom
```
Configuration variables:
- **ports** array (*Required*): Array of used ports.
- **port: name** (*Required*): Port numbers (BCM mode pin numbers) and corresponding names.
- **pull_mode** (*Optional*): The internal pull to use (UP or DOWN). Default is UP.
- **bouncetime** (*Optional*): The time in milliseconds for port debouncing. Default is 50ms.
- **invert_logic** (*Optional*): If true, inverts the output logic to ACTIVE LOW. Default is false (ACTIVE HIGH).
{% configuration %}
ports:
description: List of used ports.
required: true
type: map
keys:
"port: name":
description: The port numbers (BCM mode pin numbers) and corresponding names.
required: true
type: string
bouncetime:
description: The time in milliseconds for port debouncing.
required: false
type: integer
default: 50
invert_logic:
description: If `true`, inverts the output logic to ACTIVE LOW.
required: false
type: boolean
default: "`false` (ACTIVE HIGH)"
pull_mode:
description: >
Type of internal pull resistor to use.
Options are `UP` - pull-up resistor and `DOWN` - pull-down resistor.
required: false
type: string
default: "`UP`"
{% endconfiguration %}
For more details about the GPIO layout, visit the Wikipedia [article](https://en.wikipedia.org/wiki/Raspberry_Pi#GPIO_connector) about the Raspberry Pi.