From 94dd37d322f50e9a8145a9d93c247439fc34e360 Mon Sep 17 00:00:00 2001 From: Derek Brooks Date: Fri, 29 Sep 2017 01:42:59 -0500 Subject: [PATCH] Update Z-Wave set_config_parameter (#3453) Adds a bit of clarity to the `set_config_parameter` service. --- source/_docs/z-wave.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_docs/z-wave.markdown b/source/_docs/z-wave.markdown index fbeaa56d213..2e756036358 100644 --- a/source/_docs/z-wave.markdown +++ b/source/_docs/z-wave.markdown @@ -230,7 +230,7 @@ The `zwave` component exposes multiple services to help maintain the network. | remove_failed_node | Remove a failed node from the network. The Node should be on the controller's Failed Node List, otherwise this command will fail.| | replace_failed_node | Replace a failed device with another. If the node is not in the controller's Failed Node List, or the node responds, this command will fail.| | reset_node_meters | Reset a node's meter values. Only works if the node supports this. | -| set_config_parameter | Lets the user set a config parameter to a node. NOTE: Use string for list values. For all others use integer. | +| set_config_parameter | Lets the user set a config parameter to a node. NOTE: Use the parameter option's `label` string as the `value` for list parameters (e.g. `"value": "Off"`). For all other parameters use the relevant integer `value` (e.g. `"value": 1`). | | set_poll_intensity | Lets the user set the polling intensity of a value. Changes the polling intensity without the need of a restart. This does not persist over restarts. To keep the setting over restarts, use the Z-Wave entity-card to set the config also. | soft_reset | Tells the controller to do a "soft reset." This is not supposed to lose any data, but different controllers can behave differently to a "soft reset" command.| | start_network | Starts the Z-Wave network.|