mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-21 08:16:53 +00:00
Update mysensors.markdown
This commit is contained in:
parent
5978fb78d2
commit
9faff82103
@ -24,8 +24,10 @@ mysensors:
|
||||
gateways:
|
||||
- port: '/dev/ttyUSB0'
|
||||
persistence_file: 'path/mysensors.json'
|
||||
baud_rate: 38400
|
||||
- port: '/dev/ttyACM1'
|
||||
persistence_file: 'path/mysensors2.json'
|
||||
baud_rate: 115200
|
||||
debug: true
|
||||
persistence: true
|
||||
version: '1.5'
|
||||
@ -38,6 +40,7 @@ Configuration variables:
|
||||
- **persistence** (*Optional*): Enable or disable local persistence of sensor information. If this is disabled, then each sensor will need to send presentation messages after Home Assistant starts. Default is true.
|
||||
- **persistence_file** (*Optional*): Path to a file to save sensor information. The file extension determines the file type. Currently supported file types are 'pickle' and 'json'.
|
||||
- **version** (*Optional*): Specifies the MySensors protocol version to use. Supports 1.4 and 1.5. Default is 1.4.
|
||||
- **baud_rate** (*Optional*): Specifies baud rate of the connected gateway.
|
||||
|
||||
If you are using an original Arduino the port will be named `ttyACM*`. The exact number can be determined with the command shown below.
|
||||
|
||||
|
Loading…
x
Reference in New Issue
Block a user