diff --git a/source/_components/binary_sensor.hikvision.markdown b/source/_components/binary_sensor.hikvision.markdown
index 7e931302716..97c63757163 100644
--- a/source/_components/binary_sensor.hikvision.markdown
+++ b/source/_components/binary_sensor.hikvision.markdown
@@ -18,7 +18,7 @@ The Hikvision Binary Sensor is a platform that parses the event stream of a [Hik
 The platform will automatically add all sensors to Home Assistant that are configured within the camera/nvr interface to "Notify the surveillance center" as a trigger. If you would like to hide a sensor type you can do so by either unchecking "Notify the surveillance center" in the camera configuration or by using the "ignored" customize option detailed below.
 
 <p class='note'>
-In order for the sensors to work the hikvision user must have the 'Remote: Notify Surveillance Center/Trigger Alarm Output' permission which can be enabled from the user management section of the web interface. Also the 'WEB Authentication' needs to be set to 'digest/basic' in the security/authentication section. 
+In order for the sensors to work the hikvision user must have the 'Remote: Notify Surveillance Center/Trigger Alarm Output' permission which can be enabled from the user management section of the web interface. Also the 'WEB Authentication' needs to be set to 'digest/basic' in the security/authentication section.
 </p>
 
 For example, if you configure a camera with the name "Front Porch" that has motion detection and line crossing events enabled to notify the surveillance center the following binary sensors will be added to Home Assistant:
@@ -44,6 +44,7 @@ This platform should work with all Hikvision cameras and nvrs, and has been conf
 - DS-2CD2032-I
 - DS-2CD2042WD-I
 - DS-2CD2142FWD-I
+- DS-2CD2155FWD-IS
 
 To enable this sensor, the following lines are required in your `configuration.yaml` file: