From a340cb8cbc5012c6c4146dec060370d04a5f81a3 Mon Sep 17 00:00:00 2001 From: Olaf van Zandwijk Date: Sat, 30 Jun 2018 16:36:16 +0200 Subject: [PATCH] Update Hikvision camera list (#5635) --- source/_components/binary_sensor.hikvision.markdown | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/source/_components/binary_sensor.hikvision.markdown b/source/_components/binary_sensor.hikvision.markdown index 7e931302716..97c63757163 100644 --- a/source/_components/binary_sensor.hikvision.markdown +++ b/source/_components/binary_sensor.hikvision.markdown @@ -18,7 +18,7 @@ The Hikvision Binary Sensor is a platform that parses the event stream of a [Hik The platform will automatically add all sensors to Home Assistant that are configured within the camera/nvr interface to "Notify the surveillance center" as a trigger. If you would like to hide a sensor type you can do so by either unchecking "Notify the surveillance center" in the camera configuration or by using the "ignored" customize option detailed below.

-In order for the sensors to work the hikvision user must have the 'Remote: Notify Surveillance Center/Trigger Alarm Output' permission which can be enabled from the user management section of the web interface. Also the 'WEB Authentication' needs to be set to 'digest/basic' in the security/authentication section. +In order for the sensors to work the hikvision user must have the 'Remote: Notify Surveillance Center/Trigger Alarm Output' permission which can be enabled from the user management section of the web interface. Also the 'WEB Authentication' needs to be set to 'digest/basic' in the security/authentication section.

For example, if you configure a camera with the name "Front Porch" that has motion detection and line crossing events enabled to notify the surveillance center the following binary sensors will be added to Home Assistant: @@ -44,6 +44,7 @@ This platform should work with all Hikvision cameras and nvrs, and has been conf - DS-2CD2032-I - DS-2CD2042WD-I - DS-2CD2142FWD-I +- DS-2CD2155FWD-IS To enable this sensor, the following lines are required in your `configuration.yaml` file: