mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-23 17:27:19 +00:00
Split content to have single pages for sensor and switch
This commit is contained in:
parent
2ea98fed33
commit
a7b570c548
@ -43,57 +43,8 @@ If that is not working, check your `dmesg` or `journalctl -f` output. Keep in mi
|
||||
A word of caution: The Arduino boards are not storing states. This means that with every initialization the pins are set to off/low.
|
||||
</p>
|
||||
|
||||
## Switch Configuration
|
||||
## Building on top of the Arduino component
|
||||
|
||||
Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3,5,6,9,10, and 11 on a Arduino Uno) is not supported yet.
|
||||
|
||||
To enable the Arduino switch pins with Home Assistant, add the following section to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
switch:
|
||||
platform: arduino
|
||||
pins:
|
||||
11:
|
||||
name: Fan Office
|
||||
type: digital
|
||||
12:
|
||||
name: Light Desk
|
||||
type: digital
|
||||
```
|
||||
|
||||
Configuration variables:
|
||||
|
||||
- **pins** array (*Required*): Pins to use.
|
||||
- **name**: Name that will be used in the frontend for the pin.
|
||||
- **type**: The type of the pin. At the moment only 'digital' is supported.
|
||||
|
||||
The digital pins are numbered from 0 to 13. The available pins are 2 till 13. For testing purposes you can use pin 13 because with that pin you can control the internal LED.
|
||||
|
||||
## Sensor Configuration
|
||||
|
||||
The sensor platform allow you to get an numerical values from an analog input pin. Usually between 0 and 1024.
|
||||
|
||||
To enable an Arduino sensor with Home Assistant, add the following section to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
sensor:
|
||||
platform: arduino
|
||||
pins:
|
||||
1:
|
||||
name: Door switch
|
||||
type: analog
|
||||
0:
|
||||
name: Brightness
|
||||
type: analog
|
||||
```
|
||||
|
||||
Configuration variables:
|
||||
|
||||
- **pins** array (*Required*): Pins to use.
|
||||
- **name**: Name that will be used in the frontend for the pin.
|
||||
- **type**: The type of the pin. At the moment only 'analog' is supported.
|
||||
|
||||
The 6 analog pins are numbered from A0 to A5.
|
||||
- [Arduino Sensor](/components/sensor.arduino.html)
|
||||
- [Arduino Switch](/components/switch.arduino.html)
|
||||
|
||||
|
Loading…
x
Reference in New Issue
Block a user