Add wilight switch (#22547)

Co-authored-by: Martin Hjelmare <marhje52@gmail.com>

source/_integrations/wilight.markdown

@@ -4,7 +4,9 @@ description: Instructions on how to integrate WiLight devices into Home Assistan
 ha_category:
   - Cover
   - Fan
+  - Irrigation
   - Light
+  - Switch
 ha_release: 0.115
 ha_config_flow: true
 ha_iot_class: Local Polling
@@ -17,6 +19,7 @@ ha_platforms:
   - cover
   - fan
   - light
+  - switch
 ha_integration_type: integration
 ---
 
@@ -25,8 +28,9 @@ The `wilight` integration is to integrate [WiLight](http://www.wilight.com.br) d
 There is currently support for the following device types within Home Assistant:
 
 - Cover (WiLight model C-103).
-- Fan (WiLight model V-104).
+- [Fan](#fan) (WiLight model V-104).
-- Light (WiLight model I-100, I-102 and I-107).
+- Light (WiLight model I-100, I-102, I-107, I-110 and I-112).
+- [Irrigation](#irrigation) / Switch (WiLight model R-105).
 
 {% include integrations/config_flow.md %}
 
@@ -34,14 +38,49 @@ There is currently support for the following device types within Home Assistant:
 
 The `wilight` integration allows you to control your Fans from within Home Assistant.
 
-### Services
+### Fan Services
 
 There are several services which can be used for automations and control of the fan:
 
 | Service | Description |
 | --------- | ----------- |
-| `set_percentage` | Calling this service sets the fan speed (entity_id and percentage are required parameters). Percentage must be in the range 0-100, percentage = 0 turns off the fan. There are three speed levels 33%, 66% and 100%. Adjusting to intermediate levels goes to the next higher level.
+| `set_percentage` | Calling this service sets the fan speed (`entity_id` and `percentage` are required parameters). Percentage must be in the range 0-100, percentage = 0 turns off the fan. There are three speed levels 33%, 66% and 100%. Adjusting to intermediate levels goes to the next higher level.
-| `set_direction` | Calling this service will set the fan direction (entity_id and direction are required parameters, and direction must be one of the following: forward or reverse). Calling this service will turn the fan on.
+| `set_direction` | Calling this service will set the fan direction (`entity_id` and `direction` are required parameters, and direction must be one of the following: forward or reverse). Calling this service will turn the fan on.
-| `toggle` | Calling this service will toggle the fan between on and off states (entity_id is required).
+| `toggle` | Calling this service will toggle the fan between on and off states (`entity_id` is required).
-| `turn_off` | Calling this service will turn the fan off (entity_id is required).
+| `turn_off` | Calling this service will turn the fan off (`entity_id` is required).
-| `turn_on` | Calling this service will turn the fan on and set the speed and direction to the last used ones (defaults to high and forward, entity_id is required).
+| `turn_on` | Calling this service will turn the fan on and set the speed and direction to the last used ones (defaults to high and forward, `entity_id` is required).
+
+## Irrigation
+
+The `wilight` integration allows you to control your Irrigation from within Home Assistant. This is exposed via switches in Home Assistant.
+There are two switch types for Irrigation: `watering switch` and `pause switch`.
+A `watering switch` can turn on and off the irrigation valve, while the `pause switch` can disable / enable the action of a `watering switch`.
+`Triggers` activate (turn on) the `watering switch` (irrigation valve) at the programmed time. The trigger can be set to run on a day of the week or only once (today).
+
+### Irrigation Services
+
+There are several services which can be used for automations and control of the Irrigation:
+
+- For `watering switch`:
+
+| Service | Description |
+| --------- | ----------- |
+| `turn_off` | Calling this service will turn the irrigation valve off (`entity_id` is required).
+| `turn_on` | Calling this service will turn the irrigation valve on (`entity_id` is required).
+| `set_watering_time` | Calling this service sets the watering time (`entity_id` and `watering_time` are required parameters), `watering_time` must be in the range 1-1800 seconds.
+| `set_trigger` | Calling this service sets the trigger_1, trigger_2, trigger_3 or trigger_4 (`entity_id`, `trigger_index` and `trigger` are required parameters), `trigger_index` must be between 1 and 4 and `trigger` must be according Trigger rules (see below).
+
+- For `pause switch`:
+
+| Service | Description |
+| --------- | ----------- |
+| `turn_off` | Calling this service will turn the pause switch off, enabling watering switch (`entity_id` is required).
+| `turn_on` | Calling this service will turn the pause switch on, disabling watering switch (`entity_id` is required).
+| `set_pause_time` | Calling this service sets the pause time (`entity_id` and `pause_time` are required parameters), `pause_time` must be in the range 1-24 hours.
+
+Trigger rules:
+- String with 8 decimal characters ("0" to "9").
+- The first three characters (String[0,3]) represent an integer from 0 to 127, which corresponds to Bitfield of: 1 - Sunday, 2 - Monday, 4 - Tuesday, 8 - Wednesday, 16 - Thursday, 32 - Friday and 64 - Saturday. Setting zero, trigger is only valid for today.
+- String[3,5] represents the hour of trigger, from 0 to 23.
+- String[5,7] represents the minute of trigger, from 0 to 59.
+- String[7,8] represents the enable trigger, 0 - disabled, 1- enabled.