From aaff619eddaae37c9083e78585e7973ffb9e516c Mon Sep 17 00:00:00 2001 From: krekr Date: Sat, 6 May 2023 21:27:07 +0200 Subject: [PATCH] Update rfxtrx.markdown (#27298) Co-authored-by: Franck Nijhof --- source/_integrations/rfxtrx.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/rfxtrx.markdown b/source/_integrations/rfxtrx.markdown index e2cb946bfec..95a96048e10 100644 --- a/source/_integrations/rfxtrx.markdown +++ b/source/_integrations/rfxtrx.markdown @@ -57,7 +57,7 @@ logger: ## Supported protocols -Not all protocols as advertised are enabled on the initial setup of your transceiver. Enabling all protocols is not recommended either. +Not all protocols as advertised are enabled on the initial setup of your transceiver. Enabling all protocols is not recommended either. The RFXcom transceiver loses significant sensitivity when more protocols are enabled. **Warning**: enabling the "BlindsT0" protocol blocks receiving any other protocol. If your 433.92 product is not showing in the logs, you may need to enable additional protocols. You can do this by configuring the device itself using [RFXmgmr](http://www.rfxcom.com/epages/78165469.sf/en_GB/?ViewObjectPath=%2FShops%2F78165469%2FCategories%2FDownloads) to enable the required protocol, or you can configure the device in Home Assistant by configuring the [Protocols](#protocols).