Add documentation on associating an RF serial-number with the zone (#4091)

* Add documentation on associating an RF serial-number with the corresponding zone

* Spelling
This commit is contained in:
PhracturedBlue 2017-12-25 07:29:31 -08:00 committed by Martin Hjelmare
parent b40d325460
commit af8529395c

View File

@ -39,6 +39,7 @@ alarmdecoder:
01:
name: 'Smoke Detector'
type: 'smoke'
rfid: '0123456'
02:
name: 'Front Door'
type: 'opening'
@ -53,3 +54,4 @@ Configuration variables:
- **baudrate** (*Optional*): The baud rate of the AlarmDecoder device, if using serial type. Default: `115200`
- **panel_display** (*Optional*): Create a sensor called sensor.alarm_display to match the Alarm Keypad display. Default: `off`
- **zones** (*Optional*): AlarmDecoder has no way to tell us which zones are actually in use, so each zone must be configured in Home Assistant. For each zone, at least a name must be given. For more information on the available zone types, take a look at the [Binary Sensor](/components/binary_sensor.alarmdecoder/) docs. *Note: If no zones are specified, Home Assistant will not load any binary_sensor components.*
- **rfid** (*Optional*): The RF serial-number associated with RF zones. Providing this field allows Home Assistant to associate raw sensor data to a given zone, allowing direct monitoring of the state, battery, and supervision status.