Add new variables

This commit is contained in:
Fabian Affolter 2015-10-23 22:47:51 +02:00
parent cbedbfe2dc
commit b1feacea84

View File

@ -23,8 +23,15 @@ sensor:
Configuration variables:
- **port** (*Required*): The port where your board is connected to your Home Assistant host. If you are using an original Arduino the port will be named `ttyACM*`. The exact number can be determined with `ls /dev/ttyACM*`.
- **port** (*Required*): The port where your board is connected to your Home Assistant host.
- **debug** (*Optional*): Enable or disable verbose debug logging.
- **persistence** (*Optional*): Enable or disable local persistence of sensor information. If this is disabled, then each sensor will need to send presentation messages after Home Assistant starts.
- **persistence_file** (*Optional*): Path to a file to save sensor information. The file extension determines the file type. Currently supported file types are 'pickle' and 'json'.
- **version** (*Optional*): Specifies the MySensors protocol version to use (ex. 1.4, 1.5).
If you are using an original Arduino the port will be named `ttyACM*`. The exact number can be determined with the command shown below.
```bash
ls /dev/ttyACM*
```