From b4ba6bb2d39a2887a0f03d599dcd7c24bd4f6333 Mon Sep 17 00:00:00 2001 From: DubhAd Date: Sun, 12 Nov 2017 21:55:23 +0000 Subject: [PATCH] Added note about Heal Added Heal step to instructions, to ensure that all nodes learn about the new node --- source/_docs/z-wave/adding.markdown | 2 ++ 1 file changed, 2 insertions(+) diff --git a/source/_docs/z-wave/adding.markdown b/source/_docs/z-wave/adding.markdown index 45cb73278a2..e3bf3fae81b 100644 --- a/source/_docs/z-wave/adding.markdown +++ b/source/_docs/z-wave/adding.markdown @@ -16,6 +16,7 @@ To add (include) a non-secure Z-Wave [device](/docs/z-wave/devices/) to your sys 1. Go to the [Z-Wave control panel](/docs/z-wave/control-panel/) in the Home Assistant frontend 2. Click the **Add Node** button in the *Z-Wave Network Management* card - this will place the controller in inclusion mode 3. Activate your device to be included by following the instructions provided with the device +4. With the device in its final location, run a *Heal* Don't use this for [secure devices](https://home-assistant.io/docs/z-wave/adding/#adding-secure-devices), since this is likely to limit the features the device supports. @@ -56,3 +57,4 @@ To remove (exclude) a Z-Wave device from your system: 1. Go to the Z-Wave control panel in the Home Assistant frontend 2. Click the **Remove Node** button in the *Z-Wave Network Management* card - this will place the controller in exclusion mode 3. Activate your device to be excluded by following the instructions provided with the device +4. With the device in its final location, run a *Heal*