diff --git a/source/_integrations/zha.markdown b/source/_integrations/zha.markdown
index d1eb40b954d..c078930ceb0 100644
--- a/source/_integrations/zha.markdown
+++ b/source/_integrations/zha.markdown
@@ -456,8 +456,8 @@ Using a Philips Hue Dimmer Switch or Lutron Connected Bulb Remote is probably th
 
 1. Turn on your Hue bulb/light you want to reset. (It is important that the bulb has just been turned).
 2. Hold the Philips Hue Dimmer Switch near your bulb (closer than 10 centimeters / 4 inches).
-3. Press and hold the (I)/(ON) and (O)/(OFF) buttons on the Philips Hue Dimmer Switch for about 10 seconds continuously until your bulb starts to blink. On the newer switches hold the I/O and Scene Switch buttons.
-4. Your bulb should stop blinking and eventually turn on again. At the same time, a green light on the top left of your remote indicates that your bulb has been successfully reset to factory default settings.
+3. Press and hold the (I)/(ON) and (O)/(OFF) buttons on the Philips Hue Dimmer Switch. The bulb should start blinking in 10-20 seconds. The bulb will blink, then turn off, then turn on. You can now release the dimmer buttons.
+4. Your bulb is now factor resey and ready for pairing. A green light on the top left of the dimmer remote indicates that your bulb has been successfully reset to factory default settings.
 
 Note: If you are not unable to reset the bulb, remove it from the Hue Bridge and retry the procedure.