Merge branch 'current' into next

CODEOWNERS

@@ -19,7 +19,6 @@ source/_integrations/alexa.markdown @home-assistant/cloud @ochlocracy
 source/_integrations/alexa.smart_home.markdown @home-assistant/cloud @ochlocracy
 source/_integrations/almond.markdown @gcampax @balloob
 source/_integrations/alpha_vantage.markdown @fabaff
-source/_integrations/amazon_polly.markdown @robbiet480
 source/_integrations/ambiclimate.markdown @danielhiversen
 source/_integrations/ambient_station.markdown @bachya
 source/_integrations/amcrest.markdown @pnbruckner
@@ -42,8 +41,8 @@ source/_integrations/auth.markdown @home-assistant/core
 source/_integrations/automation.markdown @home-assistant/core
 source/_integrations/avea.markdown @pattyland
 source/_integrations/avri.markdown @timvancann
-source/_integrations/awair.markdown @danielsjf
-source/_integrations/aws.markdown @awarecan @robbiet480
+source/_integrations/awair.markdown @ahayworth @danielsjf
+source/_integrations/aws.markdown @awarecan
 source/_integrations/axis.markdown @Kane610
 source/_integrations/azure_event_hub.markdown @eavanvalkenburg
 source/_integrations/azure_service_bus.markdown @hfurubotten
@@ -53,9 +52,10 @@ source/_integrations/bizkaibus.markdown @UgaitzEtxebarria
 source/_integrations/blebox.markdown @gadgetmobile
 source/_integrations/blink.markdown @fronzbot
 source/_integrations/bmp280.markdown @belidzs
-source/_integrations/bmw_connected_drive.markdown @gerard33
+source/_integrations/bmw_connected_drive.markdown @gerard33 @rikroe
 source/_integrations/bom.markdown @maddenp
-source/_integrations/braviatv.markdown @robbiet480 @bieniu
+source/_integrations/bond.markdown @prystupa
+source/_integrations/braviatv.markdown @bieniu
 source/_integrations/broadlink.markdown @danielhiversen @felipediel
 source/_integrations/brother.markdown @bieniu
 source/_integrations/brunt.markdown @eavanvalkenburg
@@ -82,6 +82,7 @@ source/_integrations/cpuspeed.markdown @fabaff
 source/_integrations/cups.markdown @fabaff
 source/_integrations/daikin.markdown @fredrike
 source/_integrations/darksky.markdown @fabaff
+source/_integrations/debugpy.markdown @frenck
 source/_integrations/deconz.markdown @Kane610
 source/_integrations/delijn.markdown @bollewolle @Emilv2
 source/_integrations/demo.markdown @home-assistant/core
@@ -89,6 +90,7 @@ source/_integrations/denonavr.markdown @scarface-4711 @starkillerOG
 source/_integrations/derivative.markdown @afaucogney
 source/_integrations/device_automation.markdown @home-assistant/core
 source/_integrations/devolo_home_control.markdown @2Fake @Shutgun
+source/_integrations/dexcom.markdown @gagebenne
 source/_integrations/digital_ocean.markdown @fabaff
 source/_integrations/directv.markdown @ctalkington
 source/_integrations/discogs.markdown @thibmaek
@@ -122,7 +124,6 @@ source/_integrations/ezviz.markdown @baqs
 source/_integrations/fastdotcom.markdown @rohankapoorcom
 source/_integrations/file.markdown @fabaff
 source/_integrations/filter.markdown @dgomes
-source/_integrations/fitbit.markdown @robbiet480
 source/_integrations/fixer.markdown @fabaff
 source/_integrations/flick_electric.markdown @ZephireNZ
 source/_integrations/flock.markdown @fabaff
@@ -131,7 +132,6 @@ source/_integrations/flunearyou.markdown @bachya
 source/_integrations/forked_daapd.markdown @uvjustin
 source/_integrations/fortios.markdown @kimfrellsen
 source/_integrations/foscam.markdown @skgsergio
-source/_integrations/foursquare.markdown @robbiet480
 source/_integrations/freebox.markdown @snoof85 @Quentame
 source/_integrations/fronius.markdown @nielstron
 source/_integrations/frontend.markdown @home-assistant/frontend
@@ -144,18 +144,15 @@ source/_integrations/geonetnz_volcano.markdown @exxamalte
 source/_integrations/gios.markdown @bieniu
 source/_integrations/gitter.markdown @fabaff
 source/_integrations/glances.markdown @fabaff @engrbm87
-source/_integrations/gntp.markdown @robbiet480
 source/_integrations/gogogate2.markdown @vangorra
 source/_integrations/google_assistant.markdown @home-assistant/cloud
 source/_integrations/google_cloud.markdown @lufton
 source/_integrations/google_translate.markdown @awarecan
-source/_integrations/google_travel_time.markdown @robbiet480
 source/_integrations/gpsd.markdown @fabaff
 source/_integrations/greeneye_monitor.markdown @jkeljo
 source/_integrations/griddy.markdown @bdraco
 source/_integrations/group.markdown @home-assistant/core
 source/_integrations/growatt_server.markdown @indykoning
-source/_integrations/gtfs.markdown @robbiet480
 source/_integrations/guardian.markdown @bachya
 source/_integrations/harmony.markdown @ehendrix23 @bramkragten @bdraco
 source/_integrations/heatmiser.markdown @andylockran
@@ -173,18 +170,20 @@ source/_integrations/homekit_controller.markdown @Jc2k
 source/_integrations/homematic.markdown @pvizeli @danielperna84
 source/_integrations/homematicip_cloud.markdown @SukramJ
 source/_integrations/honeywell.markdown @zxdavb
-source/_integrations/html5.markdown @robbiet480
 source/_integrations/http.markdown @home-assistant/core
 source/_integrations/huawei_lte.markdown @scop @fphammerle
 source/_integrations/huawei_router.markdown @abmantis
-source/_integrations/hue.markdown @balloob
+source/_integrations/hue.markdown @balloob @frenck
+source/_integrations/humidifier.markdown @home-assistant/core @Shulyaka
 source/_integrations/hunterdouglas_powerview.markdown @bdraco
+source/_integrations/hvv_departures.markdown @vigonotion
+source/_integrations/hydrawise.markdown @ptcryan
 source/_integrations/iammeter.markdown @lewei50
 source/_integrations/iaqualink.markdown @flz
 source/_integrations/icloud.markdown @Quentame
 source/_integrations/ign_sismologia.markdown @exxamalte
 source/_integrations/incomfort.markdown @zxdavb
-source/_integrations/influxdb.markdown @fabaff
+source/_integrations/influxdb.markdown @fabaff @mdegat01
 source/_integrations/input_boolean.markdown @home-assistant/core
 source/_integrations/input_datetime.markdown @home-assistant/core
 source/_integrations/input_number.markdown @home-assistant/core
@@ -234,6 +233,7 @@ source/_integrations/melissa.markdown @kennedyshead
 source/_integrations/met.markdown @danielhiversen
 source/_integrations/meteo_france.markdown @victorcerutti @oncleben31 @Quentame
 source/_integrations/meteoalarm.markdown @rolfberkenbosch
+source/_integrations/metoffice.markdown @MrHarcombe
 source/_integrations/miflora.markdown @danielhiversen @ChristianKuehnel
 source/_integrations/mikrotik.markdown @engrbm87
 source/_integrations/mill.markdown @danielhiversen
@@ -265,6 +265,7 @@ source/_integrations/nissan_leaf.markdown @filcole
 source/_integrations/nmbs.markdown @thibmaek
 source/_integrations/no_ip.markdown @fabaff
 source/_integrations/notify.markdown @home-assistant/core
+source/_integrations/notify_events.markdown @matrozov @papajojo
 source/_integrations/notion.markdown @bachya
 source/_integrations/nsw_fuel_station.markdown @nickw444
 source/_integrations/nsw_rural_fire_service_feed.markdown @exxamalte
@@ -302,9 +303,11 @@ source/_integrations/plaato.markdown @JohNan
 source/_integrations/plant.markdown @ChristianKuehnel
 source/_integrations/plex.markdown @jjlawren
 source/_integrations/plugwise.markdown @CoMPaTech @bouwew
-source/_integrations/plum_lightpad.markdown @ColinHarrington
+source/_integrations/plum_lightpad.markdown @ColinHarrington @prystupa
 source/_integrations/point.markdown @fredrike
+source/_integrations/poolsense.markdown @haemishkyd
 source/_integrations/powerwall.markdown @bdraco @jrester
+source/_integrations/prometheus.markdown @knyar
 source/_integrations/proxmoxve.markdown @k4ds3 @jhollowe
 source/_integrations/ps4.markdown @ktnrg45
 source/_integrations/ptvsd.markdown @swamp-ig
@@ -323,7 +326,7 @@ source/_integrations/rainforest_eagle.markdown @gtdiehl @jcalbert
 source/_integrations/rainmachine.markdown @bachya
 source/_integrations/random.markdown @fabaff
 source/_integrations/repetier.markdown @MTrab
-source/_integrations/rfxtrx.markdown @danielhiversen
+source/_integrations/rfxtrx.markdown @danielhiversen @elupus
 source/_integrations/ring.markdown @balloob
 source/_integrations/rmvtransport.markdown @cgtobi
 source/_integrations/roku.markdown @ctalkington
@@ -353,6 +356,7 @@ source/_integrations/sinch.markdown @bendikrb
 source/_integrations/sisyphus.markdown @jkeljo
 source/_integrations/slide.markdown @ualex73
 source/_integrations/sma.markdown @kellerza
+source/_integrations/smappee.markdown @bsmappee
 source/_integrations/smarthab.markdown @outadoc
 source/_integrations/smartthings.markdown @andrewsayre
 source/_integrations/smarty.markdown @z0mbieprocess
@@ -366,7 +370,7 @@ source/_integrations/somfy.markdown @tetienne
 source/_integrations/sonarr.markdown @ctalkington
 source/_integrations/songpal.markdown @rytilahti @shenxn
 source/_integrations/spaceapi.markdown @fabaff
-source/_integrations/speedtestdotnet.markdown @rohankapoorcom
+source/_integrations/speedtestdotnet.markdown @rohankapoorcom @engrbm87
 source/_integrations/spider.markdown @peternijssen
 source/_integrations/spotify.markdown @frenck
 source/_integrations/sql.markdown @dgomes
@@ -415,8 +419,6 @@ source/_integrations/transmission.markdown @engrbm87 @JPHutchins
 source/_integrations/tts.markdown @pvizeli
 source/_integrations/tuya.markdown @ollo69
 source/_integrations/twentemilieu.markdown @frenck
-source/_integrations/twilio_call.markdown @robbiet480
-source/_integrations/twilio_sms.markdown @robbiet480
 source/_integrations/ubee.markdown @mzdrale
 source/_integrations/unifi.markdown @Kane610
 source/_integrations/unifiled.markdown @florisvdk
@@ -444,7 +446,6 @@ source/_integrations/watson_tts.markdown @rutkai
 source/_integrations/weather.markdown @fabaff
 source/_integrations/webostv.markdown @bendavid
 source/_integrations/websocket_api.markdown @home-assistant/core
-source/_integrations/wemo.markdown @sqldiablo
 source/_integrations/wiffi.markdown @mampfes
 source/_integrations/withings.markdown @vangorra
 source/_integrations/wled.markdown @frenck
@@ -462,7 +463,7 @@ source/_integrations/yeelightsunflower.markdown @lindsaymarkward
 source/_integrations/yessssms.markdown @flowolf
 source/_integrations/yi.markdown @bachya
 source/_integrations/yr.markdown @danielhiversen
-source/_integrations/zeroconf.markdown @robbiet480 @Kane610
+source/_integrations/zeroconf.markdown @Kane610
 source/_integrations/zerproc.markdown @emlove
 source/_integrations/zha.markdown @dmulcahey @adminiuga
 source/_integrations/zone.markdown @home-assistant/core

Gemfile.lock

@@ -29,7 +29,7 @@ GEM
     ffi (1.13.1-x64-mingw32)
     forwardable-extended (2.6.0)
     http_parser.rb (0.6.0)
-    i18n (1.8.4)
+    i18n (1.8.5)
       concurrent-ruby (~> 1.0)
     jekyll (4.1.1)
       addressable (~> 2.4)

_config.yml

@@ -100,9 +100,9 @@ social:
 
 # Home Assistant release details
 current_major_version: 0
-current_minor_version: 112
-current_patch_version: 5
-date_released: 2020-07-13
+current_minor_version: 113
+current_patch_version: 1
+date_released: 2020-07-24
 
 # Either # or the anchor link to latest release notes in the blog post.
 # Must be prefixed with a # and have double quotes around it.

source/_docs/scripts.markdown

@@ -206,7 +206,7 @@ The following automation shows how to capture the custom event `event_light_stat
 ### Repeat a Group of Actions
 
 This action allows you to repeat a sequence of other actions. Nesting is fully supported.
-There are three ways to control how many times the sequence will be repeated.
+There are three ways to control how many times the sequence will be run.
 
 #### Counted Repeat
 
@@ -215,57 +215,93 @@ the template is rendered when the repeat step is reached.
 
 {% raw %}
 ```yaml
-- alias: Repeat the sequence the specified number of times
-  repeat:
-    count: "{{ repeat_count }}"
+script:
+  flash_light:
+    mode: restart
     sequence:
-      - ...
+      - service: light.turn_on
+        data_template:
+          entity_id: "light.{{ light }}"
+      - repeat:
+          count: "{{ count|int * 2 - 1 }}"
+          sequence:
+            - delay: 2
+            - service: light.toggle
+              data_template:
+                entity_id: "light.{{ light }}"
+  flash_hallway_light:
+    sequence:
+      - service: script.flash_light
+        data:
+          light: hallway
+          count: 3
 ```
 {% endraw %}
 
 #### While Loop
 
-This form accepts a list of conditions that are evaluated _before_ each time the sequence
-is run. The sequence will be repeated _as long as_ the condition(s) evaluate to true.
+This form accepts a list of conditions (see [conditions page] for available options) that are evaluated _before_ each time the sequence
+is run. The sequence will be run _as long as_ the condition(s) evaluate to true.
 
 {% raw %}
 ```yaml
-- alias: Repeat the sequence AS LONG AS the conditions are true
-  repeat:
-    while:
-      - condition: state
-        entity_id: input_boolean.run_loop
-        state: 'on'
-      - condition: template
-        value_template: "{{ repeat.index <= 20 }}"
+script:
+  do_something:
     sequence:
-      - ...
+      - service: script.get_ready_for_something
+      - alias: Repeat the sequence AS LONG AS the conditions are true
+        repeat:
+          while:
+            - condition: state
+              entity_id: input_boolean.do_something
+              state: 'on'
+            # Don't do it too many times
+            - condition: template
+              value_template: "{{ repeat.index <= 20 }}"
+          sequence:
+            - service: script.something
 ```
 {% endraw %}
 
 #### Repeat Until
 
 This form accepts a list of conditions that are evaluated _after_ each time the sequence
-is run. Therefore the sequence will always run at least once. The sequence will be executed
+is run. Therefore the sequence will always run at least once. The sequence will be run
 _until_ the condition(s) evaluate to true.
 
 {% raw %}
 ```yaml
-- alias: Repeat the sequence UNTIL the conditions are true
-  repeat:
-    sequence:
-      - ...
-    until:
+automation:
+  - trigger:
+      - platform: state
+        entity_id: binary_sensor.xyz
+        to: 'on'
+    condition:
       - condition: state
-        entity_id: binary_sensor.the_cows_have_come_home
-        state: 'on'
+        entity_id: binary_sensor.something
+        state: 'off'
+    mode: single
+    action:
+      - alias: Repeat the sequence UNTIL the conditions are true
+        repeat:
+          sequence:
+            # Run command that for some reason doesn't always work
+            - service: shell_command.turn_something_on
+            # Give it time to complete
+            - delay:
+                milliseconds: 200
+          until:
+            # Did it work?
+            - condition: state
+              entity_id: binary_sensor.something
+              state: 'on'
 ```
 {% endraw %}
 
 #### Repeat Loop Variable
 
-A variable named `repeat` is defined within the repeat sequence. If repeat sequences are
-nested, it always applies to the inner-most loop. It contains the following fields:
+A variable named `repeat` is defined within the repeat action (i.e., it is available inside `sequence`, `while` & `until`.)
+It contains the following fields:
 
 field | description
 -|-
@@ -277,25 +313,31 @@ field | description
 
 This action allows you to select a sequence of other actions from a list of sequences.
 Nesting is fully supported.
-
-Each sequence is paired with a list of conditions. The first sequence whose conditions are all true will be run.
+Each sequence is paired with a list of conditions (see [conditions page] for available options.) The first sequence whose conditions are all true will be run.
 An optional `default` sequence can be included which will be run if none of the sequences from the list are run.
 
 {% raw %}
 ```yaml
-- alias: Choose a sequence to run
-  choose:
-    - conditions:
-        - condition: ...
-        - condition: ...
-      sequence:
-        - ...
-    - conditions:
-        - condition: ...
-      sequence:
-        - ...
-  default:
-    - ...
+automation:
+  - trigger:
+      - platform: state
+        entity_id: binary_sensor.motion
+    mode: queued
+    action:
+      - choose:
+          # IF motion detected
+          - conditions:
+              - condition: template
+                value_template: "{{ trigger.to_state.state == 'on' }}"
+            sequence:
+              - service: script.turn_on
+                entity_id:
+                  - script.slowly_turn_on_front_lights
+                  - script.announce_someone_at_door
+        # ELSE (i.e., motion stopped)
+        default:
+          - service: light.turn_off
+            entity_id: light.front_lights
 ```
 {% endraw %}
 

source/_docs/z-wave/installation.markdown

@@ -101,13 +101,6 @@ zwave:
   network_key: "0x2e, 0xcc, 0xab, 0x1c, 0xa3, 0x7f, 0x0e, 0xb5, 0x70, 0x71, 0x2d, 0x98, 0x25, 0x43, 0xee, 0x0c"
 ```
 
-In addition to modifying the `configuration.yaml` file, the `options.xml` file network key must be set as well:
-
-```xml
-<!-- Example options.xml entry for network_key -->
-<Option name="NetworkKey" value="0x2e, 0xcc, 0xab, 0x1c, 0xa3, 0x7f, 0x0e, 0xb5, 0x70, 0x71, 0x2d, 0x98, 0x25, 0x43, 0xee, 0x0c" />
-```
-
 Ensure you keep a backup of this key. If you have to rebuild your system and don't have a backup of this key, you won't be able to reconnect to any security devices. This may mean you have to do a factory reset on those devices, and your controller, before rebuilding your Z-Wave network.
 
 ## First Run

source/_integrations/alarmdecoder.markdown

@@ -231,4 +231,3 @@ The `chr(4)` and `chr(5)` sequences below are equivalent to pressing the <em>Sta
 | `alarm_arm_home`                                        | `chr(4)` + `chr(4)` + `chr(4)`  |
 | `alarm_arm_away`                                        | `chr(5)` + `chr(5)` + `chr(5)`  |
 | `alarm_arm_night`                                       | `chr(4)` + `chr(4)` + `chr(4)`  |
-

source/_integrations/amazon_polly.markdown

@@ -4,8 +4,6 @@ description: Instructions on how to setup Amazon Polly with Home Assistant.
 ha_category:
   - Text-to-speech
 ha_release: 0.37
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: amazon_polly
 ---
 

source/_integrations/avri.markdown

@@ -8,6 +8,7 @@ ha_release: 0.107
 ha_codeowners:
   - '@timvancann'
 ha_domain: avri
+ha_config_flow: true
 ---
 
 The `Avri Waste` platform allows you to track the next scheduled waste pickup and the type of waste from [Avri](https://www.avri.nl/).

source/_integrations/awair.markdown

@@ -7,6 +7,7 @@ ha_config_flow: true
 ha_release: 0.84
 ha_iot_class: Cloud Polling
 ha_codeowners:
+  - '@ahayworth'
   - '@danielsjf'
 ha_domain: awair
 ---

source/_integrations/aws.markdown

@@ -6,7 +6,6 @@ ha_category:
 ha_release: '0.91'
 ha_codeowners:
   - '@awarecan'
-  - '@robbiet480'
 ha_domain: aws
 ---
 

source/_integrations/bond.markdown

@@ -4,14 +4,18 @@ description: Instructions on setting up Bond Bridge within Home Assistant.
 ha_category:
   - Hub
   - Cover
+  - Fan
+  - Light
+  - Switch
 ha_iot_class: Local Pull
 ha_release: 0.113
 ha_domain: bond
 ha_codeowners:
   - '@prystupa'
+ha_config_flow: true
 ---
 
-Duplicates your RF remote control.
+The Bond integration allows you to control appliances through your [Bond Bridge](https://bondhome.io/). Duplicates your RF remote control.
 
 Supported devices:
 

source/_integrations/braviatv.markdown

@@ -6,7 +6,6 @@ ha_category:
 ha_release: 0.23
 ha_iot_class: Local Polling
 ha_codeowners:
-  - '@robbiet480'
   - '@bieniu'
 ha_domain: braviatv
 ha_config_flow: true

source/_integrations/debugpy.markdown

@@ -1,12 +1,13 @@
 ---
 title: Remote Python Debugger
-description: Remote Python Debugger (debugpy) for Visual Studio Code 
+description: Remote Python Debugger (debugpy) for Visual Studio Code
 ha_category:
   - Utility
 ha_release: 0.112
 ha_codeowners:
   - '@frenck'
 ha_domain: debugpy
+ha_quality_scale: internal
 ---
 
 The remote Python debugger integration allows you to use the Visual Studio Code

source/_integrations/denonavr.markdown

@@ -9,6 +9,7 @@ ha_domain: denonavr
 ha_codeowners:
   - '@scarface-4711'
   - '@starkillerOG'
+ha_config_flow: true
 ---
 
 The `denonavr` platform allows you to control [Denon Network Receivers](https://www.denon.com/en-gb/shop/networkmusicsystem/ceolpiccolon4) from Home Assistant. It might be that your device is supported by the [Denon] platform.

source/_integrations/dynalite.markdown

@@ -28,7 +28,7 @@ A Dynalite area typically (although not necessarily) defines some physical area,
 
 Each area can have one or more channels that correspond to the different devices they control. A channel can relate to a dimmable light, or other devices.
 
-Additionally, each area can have one or more presets that determine the behavior of all the channels, and sometimes trigger additional actions. Typically, preset 1 in an area means 'on', and preset '4' means off. Additional presets could be used for scenes and dimming.
+Additionally, each area can have one or more presets that determine the behavior of all the channels, and sometimes trigger additional actions. Typically, preset '1' in an area means 'on', and preset '4' means 'off'. Additional presets could be used for scenes and dimming.
 
 ## Configuration
 

source/_integrations/enocean.markdown

@@ -13,6 +13,7 @@ ha_iot_class: Local Push
 ha_codeowners:
   - '@bdurrer'
 ha_domain: enocean
+ha_config_flow: true
 ---
 
 The [EnOcean](https://en.wikipedia.org/wiki/EnOcean) standard is supported by many different vendors. There are switches and sensors of many different kinds, and typically they employ energy harvesting to get power such that no batteries are necessary.

source/_integrations/fitbit.markdown

@@ -5,8 +5,6 @@ ha_category:
   - Health
 ha_iot_class: Cloud Polling
 ha_release: 0.19
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: fitbit
 ---
 

source/_integrations/foursquare.markdown

@@ -5,8 +5,6 @@ ha_category:
   - Social
 ha_release: 0.26
 ha_iot_class: Cloud Polling and Cloud Push
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: foursquare
 ---
 

source/_integrations/gntp.markdown

@@ -4,8 +4,6 @@ description: Instructions for adding GNTP/Growl notifications to Home Assistant.
 ha_category:
   - Notifications
 ha_release: 0.16
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: gntp
 ---
 

source/_integrations/google_travel_time.markdown

@@ -5,8 +5,6 @@ ha_category:
   - Transport
 ha_iot_class: Cloud Polling
 ha_release: 0.19
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: google_travel_time
 ---
 

source/_integrations/gtfs.markdown

@@ -5,8 +5,6 @@ ha_category:
   - Transport
 ha_iot_class: Local Polling
 ha_release: 0.17
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: gtfs
 ---
 

source/_integrations/html5.markdown

@@ -4,8 +4,6 @@ description: Instructions on how to use the HTML5 push notifications platform fr
 ha_category:
   - Notifications
 ha_release: 0.27
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: html5
 ---
 
@@ -95,8 +93,10 @@ The `html5` platform can only function if all of the following requirements are
 3. Go to [https://console.cloud.google.com/apis/credentials/domainverification](https://console.cloud.google.com/apis/credentials/domainverification) and verify your domain via Google Webmaster Central / Search Console - [see below](#verify-your-domain).
 4. With the domain verified, go to [https://console.firebase.google.com](https://console.firebase.google.com), select import Google project and select the project you created.
 5. Then, click the cogwheel on top left and select "Project settings".
-6. Select 'Cloud Messaging' tab.
+6. Select the ['Cloud Messaging' tab](https://console.firebase.google.com/project/_/settings/cloudmessaging).
 7. Generate a new key pair under the Web configuration listing at the bottom of the page. To view the private key click the three dots to the right and 'Show private key'.
+8. Select the ['Service Accounts' tab](https://console.firebase.google.com/project/_/settings/serviceaccounts/adminsdk).
+9. Get the email address for the project under the text that says "Firebase service account".
 
 ### Setting up your browser
 

source/_integrations/humidifier.markdown

@@ -1,11 +1,14 @@
 ---
-title: "Humidifier"
-description: "Instructions on how to set up humidity control devices within Home Assistant."
+title: Humidifier
+description: Instructions on how to set up humidity control devices within Home Assistant.
 ha_category:
   - Humidifier
-ha_release: "0.112"
+ha_release: '0.112'
 ha_domain: humidifier
 ha_quality_scale: internal
+ha_codeowners:
+  - '@home-assistant/core'
+  - '@Shulyaka'
 ---
 
 The `humidifier` integration is built for the controlling and monitoring of humidifiers, dehumidifiers, and hygrostat devices.

source/_integrations/hydrawise.markdown

@@ -9,6 +9,8 @@ ha_category:
 ha_release: 0.71
 ha_iot_class: Cloud Polling
 ha_domain: hydrawise
+ha_codeowners:
+  - '@ptcryan'
 ---
 
 The `hydrawise` integration allows you to integrate your [Hunter Hydrawise](https://hydrawise.com) Wi-Fi irrigation controller system in Home Assistant.

source/_integrations/influxdb.markdown

@@ -8,6 +8,7 @@ ha_release: 0.9
 ha_iot_class: Configurable
 ha_codeowners:
   - '@fabaff'
+  - '@mdegat01'
 ha_domain: influxdb
 ---
 

source/_integrations/metoffice.markdown

@@ -8,6 +8,7 @@ ha_iot_class: Cloud Polling
 ha_codeowners:
   - '@MrHarcombe'
 ha_domain: metoffice
+ha_config_flow: true
 ---
 
 The `metoffice` weather platform uses the Met Office's [DataPoint API](https://www.metoffice.gov.uk/datapoint) for weather data.

source/_integrations/notify_events.markdown

@@ -1,10 +1,9 @@
 ---
-title: "Notify.Events"
-description: "Instructions on how to integrate Notify.Events service with your Home Assistant notifications."
+title: Notify.Events
+description: Instructions on how to integrate Notify.Events service with your Home Assistant notifications.
 ha_release: 0.112
 ha_category:
   - Notifications
-ha_quality_scale: platinum
 ha_domain: notify_events
 ha_codeowners:
   - '@matrozov'

source/_integrations/ozw.markdown

@@ -3,13 +3,13 @@ title: OpenZWave (beta)
 description: Instructions on how to integrate OpenZWave with Home Assistant.
 ha_category:
   - Switch
-ha_release: "0.110"
+ha_release: '0.110'
 ha_iot_class: Local Push
 ha_config_flow: true
 ha_codeowners:
-  - "@cgarwood"
-  - "@marcelveldt"
-  - "@MartinHjelmare"
+  - '@cgarwood'
+  - '@marcelveldt'
+  - '@MartinHjelmare'
 ha_domain: ozw
 ---
 

source/_integrations/prometheus.markdown

@@ -5,6 +5,8 @@ ha_category:
   - History
 ha_release: 0.49
 ha_domain: prometheus
+ha_codeowners:
+  - '@knyar'
 ---
 
 The `prometheus` integration exposes metrics in a format which [Prometheus](https://prometheus.io/) can read.

source/_integrations/rfxtrx.markdown

@@ -11,6 +11,7 @@ ha_category:
 ha_release: pre 0.7
 ha_codeowners:
   - '@danielhiversen'
+  - '@elupus'
 ha_domain: rfxtrx
 ---
 
@@ -240,7 +241,7 @@ The `rfxtrx` platform support switches that communicate in the frequency range o
 
 #### Generate codes
 
-If you need to generate codes for switches, you can use a template (useful for example COCO switches).
+If you need to generate codes for devices, you can use a template (useful for example for COCO switches).
 
 - Go to home-assistant-IP:8123/dev-template
 - Use this code to generate a code:
@@ -248,15 +249,19 @@ If you need to generate codes for switches, you can use a template (useful for e
 {% raw %}
 
 ```yaml
+# for switches
 0b11000{{ range(100,700) | random | int }}bc0cfe0{{ range(0,10) | random | int }}010f70
+
+# for dimmers change 010f70 to 020f70 e.g.
+0b11000{{ range(100,700) | random | int }}bc0cfe0{{ range(0,10) | random | int }}020f70
 ```
 
 {% endraw %}
 
-- Use this code to add a new switch in your `configuration.yaml`.
+- Use this code to add a new device in your `configuration.yaml`.
 - Launch your Home Assistant and go to the website.
 - Enable learning mode on your switch (i.e., push learn button or plug it in a wall socket)
-- Toggle your new switch in the Home Assistant interface
+- Toggle your new device in the Home Assistant interface
 
 ### Sensors
 

source/_integrations/speedtestdotnet.markdown

@@ -9,7 +9,7 @@ ha_iot_class: Cloud Polling
 ha_config_flow: true
 ha_codeowners:
   - '@rohankapoorcom'
-  - '@rngrbm87'
+  - '@engrbm87'
 ha_domain: speedtestdotnet
 ---
 

source/_integrations/squeezebox.markdown

@@ -8,6 +8,7 @@ ha_iot_class: Local Polling
 ha_domain: squeezebox
 ha_codeowners:
   - '@rajlaud'
+ha_config_flow: true
 ---
 
 The Squeezebox integration allows you to control a [Logitech Squeezebox](https://en.wikipedia.org/wiki/Squeezebox_%28network_music_player%29) music player from Home Assistant. This lets you control Squeezebox hardware like the Classic, Transporter, Duet, Boom, Radio and Touch and of software players like [Squeezelite](https://github.com/ralph-irving/squeezelite), [SoftSqueeze](http://softsqueeze.sourceforge.net/), [SqueezePlayer](https://play.google.com/store/apps/details?id=de.bluegaspode.squeezeplayer) and [SqueezeSlave](https://forums.slimdevices.com/showthread.php?93607-ANNOUNCE-Squeezeslave-1-2-released).

source/_integrations/starline.markdown

@@ -16,16 +16,16 @@ ha_codeowners:
 ha_domain: starline
 ---
 
-The `starline` integration lets you retrieve data of your StarLine security system from the StarLine portal. You will need a working StarLine account.
+The `starline` integration lets you retrieve data of your [StarLine](https://www.alarmstarline.com/) security system from the [StarLine portal](https://my.starline.ru/). You will need a working StarLine account.
 
 This integration provides the following platforms:
 
-- Binary Sensors: Hand brake, hood, trunk, alarm status and doors lock state.
-- Device tracker: The location of your car.
-- Lock: Control the lock of your car.
-- Sensors: Battery level, SIM card balance, GSM signal level, interior temperature and engine temperature.
-- Switches: Start/stop engine, heater (webasto), additional channel and sound the horn.
-- Services: Update the state, set update frequency. More details can be found [here](#services).
+- Binary sensors: Hand brake, hood, trunk, alarm status and doors lock state
+- Device tracker: The location of your car
+- Lock: Control the lock of your car
+- Sensors: Battery level, SIM card balance, GSM signal level, interior temperature and engine temperature
+- Switches: Start/stop engine, heater (webasto), additional channel and sound the horn
+- Services: Update the state, set update frequency; details [below](#services)
 
 ## Configuration
 
@@ -61,4 +61,4 @@ The service `starline.set_scan_interval` sets update frequency for entities.
 
 ## Disclaimer
 
-This software is not affiliated with or endorsed by StarLine Company.
+This software is not affiliated with or endorsed by ScPA StarLine Ltd.

source/_integrations/tile.markdown

@@ -8,6 +8,7 @@ ha_iot_class: Cloud Polling
 ha_codeowners:
   - '@bachya'
 ha_domain: tile
+ha_config_flow: true
 ---
 
 The `tile` platform allows Home Assistant to utilize [Tile® Bluetooth trackers](https://www.thetileapp.com).

source/_integrations/twilio_call.markdown

@@ -4,8 +4,6 @@ description: Instructions on how to add user notifications to Home Assistant.
 ha_category:
   - Notifications
 ha_release: 0.37
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: twilio_call
 ---
 

source/_integrations/twilio_sms.markdown

@@ -4,8 +4,6 @@ description: Instructions on how to add user notifications to Home Assistant.
 ha_category:
   - Notifications
 ha_release: '0.20'
-ha_codeowners:
-  - '@robbiet480'
 ha_domain: twilio_sms
 ---
 

source/_integrations/volvooncall.markdown

@@ -104,20 +104,20 @@ The list of currently available resources:
 - `engine_start`
 - `last_trip`
 - `is_engine_running`
-- `doors.hood_open`
+- `doors_hood_open`
 - `doors_tailgate_open`
-- `doors.front_left_door_open`
-- `doors.front_right_door_open`
-- `doors.rear_left_door_open`
-- `doors.rear_right_door_open`
-- `windows.front_left_window_open`
-- `windows.front_right_window_open`
-- `windows.rear_left_window_open`
-- `windows.rear_right_window_open`
-- `tyre_pressure.front_left_tyre_pressure`
-- `tyre_pressure.front_right_tyre_pressure`
-- `tyre_pressure.rear_left_tyre_pressure`
-- `tyre_pressure.rear_right_tyre_pressure`
+- `doors_front_left_door_open`
+- `doors_front_right_door_open`
+- `doors_rear_left_door_open`
+- `doors_rear_right_door_open`
+- `windows_front_left_window_open`
+- `windows_front_right_window_open`
+- `windows_rear_left_window_open`
+- `windows_rear_right_window_open`
+- `tyre_pressure_front_left_tyre_pressure`
+- `tyre_pressure_front_right_tyre_pressure`
+- `tyre_pressure_rear_left_tyre_pressure`
+- `tyre_pressure_rear_right_tyre_pressure`
 - `any_door_open`
 - `any_window_open`
 

source/_integrations/wemo.markdown

@@ -9,8 +9,6 @@ ha_category:
   - Switch
 ha_release: pre 0.7
 ha_config_flow: true
-ha_codeowners:
-  - '@sqldiablo'
 ha_domain: wemo
 ---
 

source/_integrations/xbox_live.markdown

@@ -13,11 +13,11 @@ ha_domain: xbox_live
 The Xbox Live integration is able to track [Xbox](https://xbox.com/) profiles.
 
 To use this sensor you need a free API key from
-[XboxAPI.com](https://xboxapi.com/).
+[xapi.us](https://xapi.us/).
 Please also make sure to connect your Xbox account on that site.
 
 The configuration requires you to specify XUIDs which are the unique identifiers
-for profiles. These can be determined on [XboxAPI.com](https://xboxapi.com/) by
+for profiles. These can be determined on [xapi.us](https://xapi.us/) by
 either looking at your own profile page or using their interactive documentation
 to search for gamertags. Sensor names default to the gamertag associated with an XUID.
 
@@ -36,7 +36,7 @@ sensor:
 
 {% configuration %}
 api_key:
-  description: Your API key from [XboxAPI.com](https://xboxapi.com/).
+  description: Your API key from [xapi.us](https://xapi.us/).
   required: true
   type: string
 xuid:

source/_integrations/xiaomi_aqara.markdown

@@ -9,6 +9,7 @@ ha_codeowners:
   - '@danielhiversen'
   - '@syssi'
 ha_domain: xiaomi_aqara
+ha_config_flow: true
 ---
 
 The `xiaomi_aqara` integration allows you to integrate [Xiaomi](https://www.mi.com/en/) Aqara-compatible devices into Home Assistant.

source/_integrations/zeroconf.markdown

@@ -6,7 +6,6 @@ ha_category:
 ha_release: 0.18
 ha_quality_scale: internal
 ha_codeowners:
-  - '@robbiet480'
   - '@Kane610'
 ha_domain: zeroconf
 ---