Update APCUPSd docs (#6159)

source/_components/apcupsd.markdown

@@ -14,6 +14,8 @@ ha_release: 0.13
 
 [APCUPSd](http://www.apcupsd.org/) status information can be integrated into Home Assistant when the Network Information Server (NIS) [is configured](http://www.apcupsd.org/manual/manual.html#nis-server-client-configuration-using-the-net-driver) is enabled on the APC device.
 
+## {% linkable_title Configuration %}
+
 To enable this sensor, add the following lines to your `configuration.yaml`:
 
 ```yaml
@@ -21,8 +23,16 @@ To enable this sensor, add the following lines to your `configuration.yaml`:
 apcupsd:
 ```
 
-Configuration variables:
-
-- **host** (*Optional*): The hostname/IP address on which the APCUPSd NIS is being served. Defaults to `localhost`.
-- **port** (*Optional*): The port on which the APCUPSd NIS is listening. Defaults to `3551`.
+{% configuration %}
+host:
+  description: The hostname/IP address on which the APCUPSd NIS is being served.
+  required: false
+  type: string
+  default: localhost
+port:
+  description: The port on which the APCUPSd NIS is listening.
+  required: false
+  type: int
+  default: 3551
+{% endconfiguration %}
 

source/_components/binary_sensor.apcupsd.markdown

@@ -15,6 +15,8 @@ ha_iot_class: "Local Polling"
 
 In addition to the [APCUPSd Sensor](/components/sensor.apcupsd/) devices, you may also create a device which is simply "on" when the UPS status is online and "off" at all other times.
 
+## {% linkable_title Configuration %}
+
 To enable this sensor, you first have to set up [apcupsd](/components/apcupsd/), and add the following lines to your `configuration.yaml` file:
 
 ```yaml
@@ -23,6 +25,10 @@ binary_sensor:
   - platform: apcupsd
 ```
 
-Configuration variables:
-
-- **name** (*Optional*): Name to use in the front end.
+{% configuration %}
+name:
+  description: Name to use in the frontend.
+  required: false
+  type: string
+  default: UPS Online Status
+{% endconfiguration %}

source/_components/sensor.apcupsd.markdown

@@ -15,6 +15,8 @@ ha_iot_class: "Local Polling"
 
 The `apcupsd` sensor platform allows you to monitor a UPS (battery backup) by using data from the [apcaccess](http://linux.die.net/man/8/apcaccess) command.
 
+## {% linkable_title Configuration %}
+
 To use this sensor platform, you first have to set up [apcupsd](/components/apcupsd/), and add the following to your `configuration.yaml` file:
 
 ```yaml
@@ -24,14 +26,6 @@ sensor:
     resources:
       - bcharge
       - linev
-      - loadpct
-      - nominv
-      - nompower
-      - numxfers
-      - outputv
-      - status
-      - timeleft
-      - tonbatt
 ```
 
 Configuration variables:
@@ -64,37 +58,7 @@ MAXTIME  : 0 Seconds
 MAXLINEV : 249.6 Volts
 MINLINEV : 244.4 Volts
 OUTPUTV  : 218.4 Volts
-SENSE    : High
-DWAKE    : 0 Seconds
-DSHUTD   : 180 Seconds
-DLOWBATT : 2 Minutes
-LOTRANS  : 196.0 Volts
-HITRANS  : 253.0 Volts
-RETPCT   : 15.0 Percent
-ITEMP    : 30.6 C
-ALARMDEL : Low Battery
-BATTV    : 27.6 Volts
-LINEFREQ : 50.0 Hz
-LASTXFER : High line voltage
-NUMXFERS : 0
-TONBATT  : 0 Seconds
-CUMONBATT: 0 Seconds
-XOFFBATT : N/A
-SELFTEST : NO
-STESTI   : 336
-STATFLAG : 0x0500000A
-DIPSW    : 0x00
-REG1     : 0x00
-REG2     : 0x00
-REG3     : 0x00
-MANDATE  : 07/13/99
-SERIALNO : GS9888761008
-BATTDATE : 13/11/15
-NOMOUTV  : 230 Volts
-NOMBATTV : 24.0 Volts
-EXTBATTS : 0
-FIRMWARE : 70.11.I
-END APC  : 2016-02-09 17:13:46 +0000
+[...]
 ```
 
 Use the (case insensitive) values from the left hand column:
@@ -105,5 +69,5 @@ sensor:
     resources:
       - linev
       - loadpct
-      - itemp
+      - timeleft
 ```