From c01087813bdb0fa1bf2c24b924b4f4afe0967d09 Mon Sep 17 00:00:00 2001 From: Fabian Affolter Date: Wed, 13 Jul 2016 09:53:49 +0200 Subject: [PATCH] Fix typos and layout --- source/_components/knx.markdown | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/source/_components/knx.markdown b/source/_components/knx.markdown index 5f552036b32..76a93895ca5 100644 --- a/source/_components/knx.markdown +++ b/source/_components/knx.markdown @@ -1,7 +1,7 @@ --- layout: page title: "KNX" -description: "Instructions on how to integrate KXN compoents with Home Assistant." +description: "Instructions on how to integrate KXN components with Home Assistant." date: 2016-06-08 12:00 sidebar: true comments: false @@ -16,22 +16,19 @@ ha_release: 0.24 There is currently support for the following device types within Home Assistant: -- [Binary Sensor](../binary_sensor.knx) -- [Switch](../switch.knx) +- [Binary Sensor](/components/binary_sensor.knx) +- [Switch](/components/switch.knx) The local ZigBee device (assuming XBee) must have an up to date Router or Coordinator API firmware installed. -## Configuration - A `knx` section must be present in the `configuration.yaml` file and contain the following options as required: -- **host**: The IP address of the KNX/IP interface to use. You can use "0.0.0.0" if your KNX/IP gateway supports discovery - -- **port**: The UDP port number. Default: `3671` - -#### Example - ```yaml knx: - host: 192.168.1.12 + host: IP_ADDRESS + port: PORT ``` + +- **host** (*Required*): The IP address of the KNX/IP interface to use. You can use "0.0.0.0" if your KNX/IP gateway supports discovery. +- **port** (*Optional*): The UDP port number. Defaults to `3671`. +