Add IDTECK proximity card component (#7421)

* Added IDTECK proximity card sensor component.

* Changed to a component.

* ✏️ Tweaks
This commit is contained in:
Michael Dubno 2019-01-01 07:46:42 -05:00 committed by Franck Nijhof
parent b3f9b27069
commit c0306f1575
2 changed files with 47 additions and 0 deletions

View File

@ -0,0 +1,47 @@
---
layout: page
title: "IDTECK Prox Card Reader"
description: "How to use IDTECK proximity card readers."
date: 2018-11-14 13:00
sidebar: true
comments: false
sharing: true
footer: true
logo: idteck.jpg
ha_category: Other
featured: false
ha_release: 0.85
ha_iot_class: "Local Push"
---
[IDTECK](http://www.idteck.com) makes ID systems used to control access and identify users. This component works with [Proximity Readers](http://www.idteck.com/en/products/proximity-reader-__-card-%26-tag-__125khz) (RFID card readers). The device is connected to Home Assistant through a serial to ethernet converter (NPort).
An `idteck_prox_keycard` event is fired whenever a card or key sequence has been entered. The event contains 'card' - the card/key sequence, and the 'name' of the card reader. Checking 'card' against known card numbers can be used as the basis of an entry control system, or as part of a check-in/check-out system.
## {% linkable_title Configuration %}
``` yaml
# Example configuration.yaml entry
idteck_prox:
- host: host1.domain.com
port: 4001
name: "Lower Door"
- host: host2.domain.com
port: 4001
name: "Upper Door"
```
{% configuration %}
host:
description: The hostname or IP address of the ethernet to serial adapter that is connected to the proximity reader. It is assumed that the adapter has been preconfigured.
required: true
type: string
port:
description: The port of the ethernet to serial adapter
required: true
type: port
name:
description: The name of the prox card reader
required: true
type: string
{% endconfiguration %}

Binary file not shown.

After

Width:  |  Height:  |  Size: 3.0 KiB