diff --git a/source/_integrations/iometer.markdown b/source/_integrations/iometer.markdown new file mode 100644 index 00000000000..17c3cd8be7f --- /dev/null +++ b/source/_integrations/iometer.markdown @@ -0,0 +1,62 @@ +--- +title: IOmeter +description: Instructions on how to integrate IOmeter within Home Assistant. +ha_release: 2025.2 +ha_category: + - Sensor + - Energy +ha_codeowners: + - '@MaestroOnICe' + - '@iometer-gmbh' +ha_quality_scale: bronze +ha_domain: iometer +ha_integration_type: integration +ha_iot_class: Local Polling +ha_config_flow: true +ha_zeroconf: true +--- + +The **IOmeter** {% term integration %} fetches data from your [IOmeter](https://iometer.de/produkt/) device, by using the local HTTP API. + +IOmeter is a German company that provides the IOmeter device for reading electricity meters. + +{% important %} +In order for the IOmeter to be used by Home Assistant, the Core/Bridge firmware version should be at least 62/69. +{% endimportant %} + +{% include integrations/config_flow.md %} + +### Configuration parameters + +{% configuration_basic %} +IP address: + description: The IP address of your IOmeter. +{% endconfiguration_basic %} + +## Data updates + +The integration will update its sensors by polling the IOmeter Bridge every ten seconds for new values. We recommend using USB-C power for the IOmeter Core instead of batteries. + +## Available sensors + +The following sensors are supported: + +- Power (W): Active power +- Total energy usage (kWh): How much energy the meter used +- Total energy returned (kWh): How much energy the meter returned to the grid +- Meter number: Electricity meter number +- Pin status: Electricity meter pin status +- Core battery level: Battery level of the IOmeter Core in percent +- Core power status: Battery or USB-C power for the IOmeter Core +- Signal strength WiFi: WiFi connection strength of the Bridge +- Signal strength Core/Bridge: Sub-GHz connection strength between Core and Bridge + +## Troubleshooting + +There are no commonly known issues with this integration. + +## Remove integration + +This integration follows standard integration removal. No extra steps are required. + +{% include integrations/remove_device_service.md %}