Update z-wave-device-specific.markdown (#704)

* Update z-wave-device-specific.markdown

* Update z-wave-device-specific.markdown

* Update z-wave-device-specific.markdown

source/getting-started/z-wave-device-specific.markdown

@@ -9,6 +9,52 @@ sharing: true
 footer: true
 ---
 
+##### {% linkable_title Motion or alarm sensors %}
+
+In order for Home Assistant to recognize well the sensor, you will need to change its configuration from `Basic Set (default)` to `Binary Sensor report` or `Alarm report`. Currently there's no way to do this in Home Assistant but you can use ozwcp (OpenZWave control panel), Domoticz or similar to do it
+These devices will either show as a binary sensor or a sensor called `Alarm xxxx` and will report a numeric value. Test to see what value is what. Sometimes this is noted in the device manual.
+
+
+##### {% linkable_title Locks and other secure devices %}
+
+These devices require a network key to be set for the zwave network before they are paired. This key is set in OpenZwave's `options.xml` which is located in Open Zwave's directory. This should also be the same directory as `config_path:` in your `configuration.yaml`. If it's not, make sure you have the same values in all the files you are using.
+The option is commented out by default in `options.xml` and is a default key. Make your own unique key. The key is in Hexadecimals.
+It is best to pair these devices in Open Zwave Control Panel or other Zwave tool that can show you logs while pairing. Test the device before you save the configuration.
+Make sure you copy the newly saved `zwcfg_[home_id].xml`into your HomeAssistant config directory.
+
+##### {% linkable_title Event basic_level for automation %}
+HomeAssistant will trigger a event when command_class_basic changes value on a node.
+This can be virtually anything, so tests have to be made to determine what value equals what.
+You can use this for automations.
+
+Example:
+```yaml
+- alias: Minimote Button Pressed
+  trigger:
+    platform: event
+    event_type: zwave.basic_level
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      basic_level: 255
+```
+
+##### {% linkable_title Event scene_id for automation %}
+HomeAssistant will trigger a event when a scene is activated by a node in the zwave network.
+This can be a press of a button, so tests have to be made to determine what scene_id equals what.
+You can use this for automations.
+
+Example:
+```yaml
+- alias: Minimote Button 1 Pressed
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 1
+```
+
+
 ##### {% linkable_title Aeon Minimote %}
 
 Here's a handy configuration for the Aeon Labs Minimote that defines all possible button presses. Put it into `automation.yaml`.
@@ -78,7 +124,3 @@ Here's a handy configuration for the Aeon Labs Minimote that defines all possibl
       entity_id: aeon_labs_minimote_1
       scene_id: 8
 ```
-
-##### {% linkable_title Aeotec MultiSensor 6 %}
-
-In order for Home Assistant to recognize well the motion sensor, you will need to change its configuration from `Basic Set (default)` to `Binary Sensor report`. Currently there's no way to do this in Home Assistant but you can use ozwcp (OpenZWave control panel), Domoticz or similar to do it