Update configuration variables description (#6416)

* Update configuration variables description

* Change type back to list

* Fix value

source/_components/binary_sensor.wirelesstag.markdown

@@ -15,6 +15,8 @@ ha_release: 0.68
 
 To get your [wirelesstag.net](http://wirelesstag.net) binary sensors working within Home Assistant, please follow the instructions for the general [WirelessTag component](/components/wirelesstag).
 
+## {% linkable_title Configuration %}
+
 To enable tags set up with your [wirelesstag.net](http://wirelesstag.net) account, add the following to your `configuration.yaml` file:
 
 ```yaml
@@ -28,21 +30,30 @@ binary_sensor:
 ```
 
 {% configuration %}
-  monitored_conditions:
+monitored_conditions:
-    description: The conditions types to monitor; valid values are specified below
+  description: The conditions types to monitor.
-    required: true
+  required: true
-    type: list
+  type: list
+  keys:
+    presence:
+      description: On means in range, Off means out of range.
+    motion:
+      description: On when a movement was detected, Off when clear.
+    door:
+      description: On when a door is open, Off when the door is closed.
+    cold:
+      description: On means temperature become too cold, Off means normal.
+    heat:
+      description: On means hot, Off means normal.
+    dry:
+      description: On means too dry (humidity), Off means normal.
+    wet:
+      description: On means too wet (humidity), Off means normal.
+    light:
+      description: On means light detected, Off means no light.
+    moisture:
+      description: On means moisture detected (wet), Off means no moisture (dry).
+    battery:
+      description: On means tag battery is low, Off means normal.
 {% endconfiguration %}
 
-The following conditions can be monitored:
-
-* (`presence`): On means in range, Off means out of range.
-* (`motion`): On when a movement was detected, Off when clear.
-* (`door`): On when a door is open, Off when the door is closed.
-* (`cold`): On means temperature become too cold, Off means normal.
-* (`heat`): On means hot, Off means normal.
-* (`dry`): On means too dry (humidity), Off means normal.
-* (`wet`): On means too wet (humidity), Off means normal.
-* (`light`): On means light detected, Off means no light.
-* (`moisture`): On means moisture detected (wet), Off means no moisture (dry).
-* (`battery`): On means tag battery is low, Off means normal.

source/_components/sensor.wirelesstag.markdown

@@ -15,6 +15,8 @@ ha_release: 0.68
 
 To get your [wirelesstag.net](http://wirelesstag.net) sensors working within Home Assistant, please follow the instructions for the general [WirelessTag component](/components/wirelesstag).
 
+## {% linkable_title Configuration %}
+
 To enable tags set up with your [wirelesstag.net](http://wirelesstag.net) account, add the following to your `configuration.yaml` file:
 
 ```yaml
@@ -27,15 +29,18 @@ sensor:
 ```
 
 {% configuration %}
-  monitored_conditions:
+monitored_conditions:
-    description: The metrics types to monitor; valid values are specified below
+  description: The metrics types to monitor.
-    required: true
+  required: true
-    type: list
+  type: list
+  keys:
+    temperature:
+      description: Value is in Celsius or Fahrenheit (according to your settings at Tag Manager).
+    humidity:
+      description: "Humidity level in %."
+    moisture:
+      description: "Water level/soil moisture in % (applicable for Water Tag only)."
+    light:
+      description: Brightness in lux (if supported by tag).
 {% endconfiguration %}
 
-The following metrics can be monitored:
-
-* (`temperature`): Value is in Celsius or Fahrenheit (according to your settings at Tag Manager).
-* (`humidity`): Humidity level in %.
-* (`moisture`): Water level/soil moisture in % (applicable for Water Tag only).
-* (`light`): Brightness in lux (if supported by tag).

source/_components/switch.wirelesstag.markdown

@@ -27,19 +27,22 @@ switch:
 ```
 
 {% configuration %}
-  monitored_conditions:
+monitored_conditions:
-    description: The metrics types to control; valid values are specified below
+  description: The metrics types to control.
-    required: true
+  required: true
-    type: list
+  type: list
+  keys:
+    temperature:
+      description: Control arm/disarm temperature monitoring.
+    humidity:
+      description: Control arm/disarm humidity monitoring.
+    motion:
+      description: Control arm/disarm motion and door open/close events monitoring.
+    light:
+      description: Control monitoring of light changes.
+    moisture:
+      description: Control monitoring of water level/soil moisture for water sensor.
 {% endconfiguration %}
 
-The following metrics can be controlled:
-
-* (`temperature`): Control arm/disarm temperature monitoring.
-* (`humidity`): Control arm/disarm humidity monitoring.
-* (`motion`): Control arm/disarm motion and door open/close events monitoring.
-* (`light`): Control monitoring of light changes.
-* (`moisture`): Control monitoring of water level/soil moisture for water sensor.
-
 Arm/Disarm of motion switch is required to receive motion and door binary sensors events.
 Others are only needed if you want to receive push notifications from tags on a specific range of changes in temperature, humidity, light or moisture.