Update for QNAP config_flow (#24602)

Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Franck Nijhof <git@frenck.dev>

source/_integrations/qnap.markdown

@@ -6,120 +6,26 @@ ha_category:
 ha_release: 0.38
 ha_iot_class: Local Polling
 ha_domain: qnap
+ha_config_flow: true
 ha_platforms:
   - sensor
 ha_integration_type: integration
 ---
 
-This `qnap` sensor allows getting various statistics from your [QNAP NAS](https://www.qnap.com/en-us/).
+The QNAP integration allows getting various statistics from your [QNAP NAS](https://www.qnap.com/en-us/).
 
-## Configuration
+{% include integrations/config_flow.md %}
 
-To use the `qnap` sensor in your installation, add the following to your `configuration.yaml` file:
+## Integration entities
 
-```yaml
-# Example configuration.yaml entry
-sensor:
-  - platform: qnap
-    host: IP_ADDRESS_OF_QNAP_NAS
-    username: USERNAME
-    password: PASSWORD
-    monitored_conditions:
-      - status
-      - cpu_usage
-      - memory_percent_used
-      - network_tx
-      - volume_percentage_used
-```
-
-{% configuration %}
-host:
-  description: The IP address of the QNAP NAS to monitor, i.e., `192.168.8.12`.
-  required: true
-  type: string
-port:
-  description: The port number on which the QNAP NAS web interface is reachable.
-  required: false
-  default: 8080
-  type: integer
-ssl:
-  description: Whether to connect via `https`. You might need to configure `port` (i.e., `443`) and `verify_ssl` (i.e., `false`) accordingly.
-  required: false
-  default: false
-  type: boolean
-verify_ssl:
-  description: Whether SSL certificates should be validated. Set to `false` if you use the default, self-signed QNap certificate.
-  required: false
-  default: true
-  type: boolean
-timeout:
-  description: How long (in seconds) to wait for a response from the QNAP device before giving up.
-  required: false
-  default: 10
-  type: integer
-username:
-  description: An administration user to connect to the QNAP NAS. This user must be a member of the _administration_ group and MFA must be disabled for that account.
-  required: true
-  type: string
-password:
-  description: The password of the user to connect to the QNAP NAS.
-  required: true
-  type: string
-drives:
-  description: "Array of drives to monitor (ex: `0:1`)."
-  required: false
-  default: all drives
-  type: list
-volumes:
-  description: "Array of volumes to monitor (ex: `DataVol1`)."
-  required: false
-  default: all volumes
-  type: list
-nics:
-  description: "Array of network interfaces to monitor (ex: `eth0`)."
-  required: false
-  default: all NICs
-  type: list
-monitored_conditions:
-  description: Defines the stats to monitor as sensors.
-  required: true
-  type: list
-  keys:
-    status:
-      description: Displays overall system health.
-    system_temp:
-      description: Displays the overall system temperature.
-    cpu_temp:
-      description: Displays the CPU's temperature.
-    cpu_usage:
-      description: Displays the CPU's utilization as a percentage.
-    memory_free:
-      description: Displays the size of available RAM in GB.
-    memory_used:
-      description: Displays the size of used RAM in GB.
-    memory_percent_used:
-      description: Displays the size of used RAM as a percentage of total RAM.
-    network_link_status:
-      description: Displays whether the network interfaces is up (creates a new entry for each interface).
-    network_tx:
-      description: Displays the upload speed of a network interface in MB/s (creates a new entry for each interface).
-    network_rx:
-      description: Displays the download speed of a network interface in MB/s (creates a new entry for each interface).
-    drive_smart_status:
-      description: Displays the S.M.A.R.T. status of the drive (creates a new entry for each drive).
-    drive_temp:
-      description: Displays the temperature of the drive (creates a new entry for each drive).
-    volume_size_free:
-      description: Displays the available space of the volume in GB (creates a new entry for each volume).
-    volume_size_used:
-      description: Displays the used space of the volume in GB (creates a new entry for each volume).
-    volume_percentage_used:
-      description: Displays the used space of the volume as a percentage (creates a new entry for each volume).
-{% endconfiguration %}
-
-### SSL and Self-signed certificates
-
-If your QNAP device uses self-signed certificates, set the `verify_ssl` option to `false`. If you configured your device to accept SSL-only connections, please also check that you set `port` accordingly, or you might get an `SSL: WRONG_VERSION_NUMBER` error.
+The QNAP integration will add the following sensors:
+- System: status, system temperature
+- CPU: usage, temperature
+- Memory: usage, free, used, total
+- Volume: usage, used
+- Folders: usage, used
+- Drives: smart status, usage
+- Network: bandwidth, status
 
 ### QNAP device support