jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-07-24 01:37:23 +00:00
Code Issues Packages Projects Releases Wiki Activity

be more consistent

Browse Source
This commit is contained in:
c0ffeeca7 2025-06-16 08:48:53 +02:00
parent 156a5d4133
commit d14022a1f4
No known key found for this signature in database
GPG Key ID: 11BDC0C7599B77E7
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
source/_integrations/zwave_js.markdown
View File

@ -139,18 +139,18 @@ Follow these steps to add a new end device to you Z-Wave network. If you are loo
- The Z-Wave controller is now in inclusion mode, ready to add an end device to the network.
4. Check, if your end device supports SmartStart:
- On the packaging, check for the SmartStart label.
- Find the QR code. It can be on the packaging or on the device itself.
- Find the QR code. It can be on the packaging or on the end device itself.
- If you can't see it on the device, open the battery compartment. The QR code might be inside.
5. Depending on whether your device supports SmartStart, follow the steps in either option 1 or 2:
5. Depending on whether your end device supports SmartStart, follow the steps in either option 1 or 2:
- **Option 1: your end device supports SmartStart**:
- Select **Scan QR code** and scan the QR code on your device.
- If scanning does not work (for example due to missing HTTPS), paste the QR code content as text from a different QR reader and select **Submit**.
- Turn the end device on. If it was already on, you might need to power-cycle it.
- **Option 2: your device does not support SmartStart**:
- **Option 2: your end device does not support SmartStart**:
- Set the end device in inclusion mode. Refer to the device manual to see how this is done.
- If your end device is included using S2 security, you may be prompted to enter a PIN number provided with your device. Often, this PIN is provided with the documentation _and_ is also printed on the device itself. For more information on secure inclusion, refer to [this section](/integrations/zwave_js/#should-i-use-secure-inclusion).
- If your end device is included using S2 security, you may be prompted to enter a PIN number provided with your end device. Often, this PIN is provided with the documentation _and_ is also printed on the device itself. For more information on secure inclusion, refer to [this section](/integrations/zwave_js/#should-i-use-secure-inclusion).
6. The UI should confirm that the end device was added. After a short while (seconds to minutes), the entities should also be created.
7. **Troubleshooting**: If the controller fails to add/find your device, cancel the inclusion process.
7. **Troubleshooting**: If the controller fails to add/find your end device, cancel the inclusion process.
- In some cases, it might help to first [remove](/integrations/zwave_js/#removing-a-device-from-the-z-wave-network) an end device (exclusion) before you add it, even when the end device has not been added to this Z-Wave network yet.
- Another approach would be to factory reset the end device. Refer to the device manual to see how this is done.