Added Document for KNX Sensor Component (#808)

* Added link to KNX Sensor Dokumentation

Added link to KNX Sensor Dokumentation

* Added Doc for KNX Sensor Componente

Added Doc for KNX Sensor Componente

* Update sensor.knx.markdown

* Update sensor.knx.markdown

Added information about the newly added minimum/maximum value support
This commit is contained in:
David Baumann 2016-09-19 14:50:49 +02:00 committed by Fabian Affolter
parent 1923b14332
commit d14ffa1b61
2 changed files with 51 additions and 1 deletions

View File

@ -16,7 +16,8 @@ ha_release: 0.24
There is currently support for the following device types within Home Assistant:
- [Binary Sensor](/components/binary_sensor.knx)
- [Binary Sensor](/components/binary_sensor.knx)
- [Sensor](/components/sensor.knx)
- [Switch](/components/switch.knx)
- [Thermostat](/components/thermostat.knx)

View File

@ -0,0 +1,49 @@
---
layout: page
title: "KNX Sensor"
description: "Instructions on how to use the KNX Sensor with Home Assistant."
date: 2016-08-20 22:24
sidebar: true
comments: false
sharing: true
footer: true
logo: knx.png
ha_category: DIY
ha_release: 0.24
---
[KNX/EIB](http://www.knx.org) integration for Home Assistant allows you to connect to a KNX bus. The component requires a local KNX/IP interface like the [Weinzierl 730](http://www.weinzierl.de/index.php/en/all-knx/knx-devices-en/knx-ip-interface-730-en). Through this it will send and receive commands to and from other devices to the KNX bus.
There is currently support for the following KNX Data Point Types
- Temperature: KNX Datapoint Type 9.001 - °C - 2 Byte Float
- Speed(Wind Speed): KNX Datapoint Type 9.005 - m/s - 2 Byte Float
- Illuminance(Lux): KNX Datapoint Type 9.004 - Lux - 2 Byte Float
The `knx` Component muste be Configured Correctly, see [KNX Component](/components/knx)
### Sample Configuration ###
```yaml
sensor:
- platform: knx
name: knxweather_temp
type: temperature
address: 1/0/3
- platform: knx
name: knxweather_wind
type: speed_ms
address: 1/0/0
- platform: knx
name: knxweather_lux
type: illuminance
address: 1/0/1
```
### Optional Parameters: ###
- minimum - Minimum Sensor Value who gets processed
- maxmimum - Maxmimum Sensor Value who gets processed
If minimum and maximum not defined, hardcoded default values are used