mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-16 05:46:52 +00:00
Add troubleshooting information for the 'authentication' step in HomeWizard (#37035)
* Add troubleshooting instruction which tells more about the 'press button 'action in HomeWizard * Add troubleshooting instruction which tells more about the 'press button 'action in HomeWizard * Add callout, as the 30-seconds step is quite important * Use note instead of details * Re-arrange * tiny tweak * Update source/_integrations/homewizard.markdown * Apply suggestions from code review Co-authored-by: Franck Nijhof <frenck@frenck.nl> * Update source/_integrations/homewizard.markdown Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com> --------- Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com> Co-authored-by: Franck Nijhof <frenck@frenck.nl>
This commit is contained in:
parent
816fb3077a
commit
d3af7cda17
@ -134,6 +134,15 @@ It may happen that you can't find your devices or they won't show up in the inte
|
||||
- Make sure you have enabled the local API in device settings via the HomeWizard Energy app.
|
||||
- Make sure both Home Assistant and the device are on the same network.
|
||||
|
||||
### Which button do I need to press to configure the device?
|
||||
|
||||
1. During setup, you may be asked to press a button on your device to authenticate it with Home Assistant.
|
||||
- **P1 Meter**: Press the white button on the front of the P1 Meter.
|
||||
- **Plug-In Battery**: Press the black touch button on the front of the device. You will hear a beep.
|
||||
- **Water Meter** and **kWh Meter**: they do not require this step.
|
||||
2. After pressing the button, you must select **Continue** within 30 seconds to complete the setup.
|
||||
- If the setup times out, you may need to press the button again.
|
||||
|
||||
## Remove integration
|
||||
|
||||
This integration follows standard integration removal.
|
||||
|
Loading…
x
Reference in New Issue
Block a user