Remove not needed raw's

This commit is contained in:
Fabian Affolter 2018-04-02 10:48:06 +02:00
parent e499633d30
commit d707f1a2cd
No known key found for this signature in database
GPG Key ID: DDF3D6F44AAB1336

View File

@ -16,13 +16,14 @@ ha_iot_class: "Cloud Polling"
The `speedtest` sensor component uses the [Speedtest.net](https://speedtest.net/) web service to measure network bandwidth performance.
## {% linkable_title Configuration %}
By default, it will run every hour. The user can change the update frequency in the configuration by defining the minute, hour, and day for a speed test to run. For the `server_id` check the list of [available servers](https://www.speedtest.net/speedtest-servers.php).
To add a Speedtest.net sensor to your installation, add the following to your `configuration.yaml` file:
Once per hour, on the hour (default):
{% raw %}
```yaml
# Example configuration.yaml entry
sensor:
@ -32,7 +33,6 @@ sensor:
- download
- upload
```
{% endraw %}
{% configuration %}
monitored_conditions:
@ -79,7 +79,6 @@ This component uses [speedtest-cli](https://github.com/sivel/speedtest-cli) to g
When Home Assistant first starts up, the values of the speed test will show as `Unknown`. You can use the service `sensor.update_speedtest` to run a manual speed test and populate the data or just wait for the next regularly scheduled test. You can turn on manual mode to disable the scheduled speed tests.
## {% linkable_title Examples %}
In this section, you find some real-life examples of how to use this sensor.
@ -88,7 +87,6 @@ In this section, you find some real-life examples of how to use this sensor.
Every half hour of every day:
{% raw %}
```yaml
# Example configuration.yaml entry
sensor:
@ -101,13 +99,11 @@ sensor:
- download
- upload
```
{% endraw %}
### {% linkable_title Run at a specific time %}
Everyday at 12:30AM, 6:30AM, 12:30PM, 6:30PM:
{% raw %}
```yaml
# Example configuration.yaml entry
sensor:
@ -123,7 +119,6 @@ sensor:
- download
- upload
```
{% endraw %}
### {% linkable_title Using as a trigger in an automation %}
@ -150,6 +145,7 @@ automation:
## {% linkable_title Notes %}
- When running on Raspberry Pi, just note that the maximum speed is limited by its 100 Mbit/s LAN adapter.
- Running this platform can have negative effects on the system's performance as it requires a fair amount of memory.
- Entries under `monitored_conditions` only control what entities are available in Home Assistant, it does not disable the condition from running.
- If ran frequently, this component has the ability to use a considerable amount of data. Frequent updates should be avoided on bandwidth-capped connections.
- While running, your network capacity is fully utilized. This may have a negative effect on other devices in use the network such as gaming consoles or streaming boxes.