diff --git a/source/installation/raspberrypi.markdown b/source/installation/raspberrypi.markdown index 15f64a8990f..51408e31c81 100644 --- a/source/installation/raspberrypi.markdown +++ b/source/installation/raspberrypi.markdown @@ -29,11 +29,10 @@ Remember to ensure you're using an [appropriate power supply](https://www.raspbe This guide shows how to install the {% term "Home Assistant Operating System" %} onto your Raspberry Pi using Raspberry Pi Imager. -If Raspberry Pi Imager is not supported by your platform, you can [download the Home Assistant image](#downloading-the-home-assistant-image) and use another imaging tool. - ### Write the image to your SD card 1. Download and install the Raspberry Pi Imager on your computer as described under [https://www.raspberrypi.com/software/](https://www.raspberrypi.com/software/). + - **Troubleshooting**: If Raspberry Pi Imager is not supported by your platform, you can [download the Home Assistant image](#downloading-the-home-assistant-image) and use another imaging tool, such as Balena Etcher. 2. Open the Raspberry Pi Imager and select your Raspberry Pi device. ![Open Raspberry Pi Imager](/images/installation/rpi_imager_start.png) 3. Choose the operating system: