mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-21 08:16:53 +00:00
Added documentation for manually adding a Yamaha AVR (#959)
* Added documentation for manually adding a Yamaha AVR
This commit is contained in:
parent
b167b8f64b
commit
db36a2eccc
@ -29,14 +29,18 @@ To add a Yamaha Network Receiver to your installation, add the following to your
|
||||
# Example configuration.yaml entry
|
||||
media_player:
|
||||
platform: yamaha
|
||||
host: 192.168.1.100
|
||||
name: 'Basement Receiver'
|
||||
```
|
||||
Configuration variables:
|
||||
|
||||
- **name** (*Optional*): Name of the device
|
||||
- **host** (*Optional*): IP address or hostname of the device
|
||||
|
||||
A few notes:
|
||||
|
||||
- This will automatically search your network for Yamaha receivers. It will add a media player device for each one.
|
||||
- Not specifying the host variable will result in automatically searching your network for Yamaha Receivers. It will add a media player device for each one.
|
||||
- In some cases, autodiscovery fails due to a known bug in the receiver's firmware. It is possible to manually specify the reveiver's IP address or via it's hostname (if it is discoverably by your DNS) then.
|
||||
- Please note: If adding the IP address or hostname manually, you **must** enable network standby on your receiver, or else startup of Home Assistant will hang if you have your receiver switched off.
|
||||
- Currently the only controls that are available is Power On/Off, Mute, and Volume control. Other functions such as source select are in progress of being developed.
|
||||
|
||||
|
Loading…
x
Reference in New Issue
Block a user