diff --git a/source/_integrations/bbb_gpio.markdown b/source/_integrations/bbb_gpio.markdown
deleted file mode 100644
index 1e4eeb328fb..00000000000
--- a/source/_integrations/bbb_gpio.markdown
+++ /dev/null
@@ -1,126 +0,0 @@
----
-title: BeagleBone Black GPIO
-description: Instructions on how to integrate the GPIO capability of a BeagleBone Black into Home Assistant.
-ha_category:
-  - DIY
-  - Binary Sensor
-  - Switch
-ha_release: 0.36
-ha_iot_class: Local Push
-ha_domain: bbb_gpio
-ha_platforms:
-  - binary_sensor
-  - switch
----
-
-<div class='note warning'>
-
-This integration is deprecated and will be removed in Home Assistant Core 2022.4.
-
-For more information see: [Architectural Decision Record 0019](https://github.com/home-assistant/architecture/blob/master/adr/0019-GPIO.md).
-
-</div>
-
-The `bbb_gpio` integration is the base for all [BeagleBone Black](https://beagleboard.org/black) related GPIO platforms in Home Assistant.
-There is no setup needed for the integration itself.
-
-## Binary Sensor
-
-The `bbb_gpio` binary sensor platform allows you to read sensor values of the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
-
-### Configuration
-
-To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-binary_sensor:
-  - platform: bbb_gpio
-    pins:
-      P8_12:
-        name: Door
-      GPIO0_26:
-        name: Window
-```
-
-{% configuration %}
-pins:
-  description: List of used pins.
-  required: true
-  type: map
-  keys:
-    pin_name:
-      description: Port numbers and corresponding names.
-      required: true
-      type: map
-      keys:
-        name:
-          description: Friendly name to use for the frontend.
-          required: true
-          type: string
-        bouncetime:
-          description: Debounce time for reading input pin defined in milliseconds [ms].
-          required: false
-          type: integer
-          default: 50
-        invert_logic:
-          description: If `true`, inverts the input logic to ACTIVE LOW
-          required: false
-          type: boolean
-          default: false
-        pull_mode:
-          description: Type of internal pull resistor connected to input. Options are `UP` - pull-up resistor and `DOWN` - pull-down resistor.
-          required: false
-          type: string
-          default: UP
-{% endconfiguration %}
-
-For more details about the GPIO layout, visit the [article](https://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.
-
-## Switch
-
-The `bbb_gpio` switch platform allows you to control the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
-
-### Configuration
-
-To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-switch:
-  - platform: bbb_gpio
-    pins:
-      GPIO0_7:
-        name: LED Red
-      P9_12:
-        name: LED Green
-```
-
-{% configuration %}
-pins:
-  description: List of used pins.
-  required: true
-  type: map
-  keys:
-    pin_name:
-      description: Port numbers and corresponding names.
-      required: true
-      type: map
-      keys:
-        name:
-          description: Friendly name to use for the frontend.
-          required: false
-          type: string
-        initial:
-          description: Initial state of the pin.
-          required: false
-          default: false
-          type: boolean
-        invert_logic:
-          description: If `true`, inverts the input logic to ACTIVE LOW
-          required: false
-          default: false
-          type: boolean
-{% endconfiguration %}
-
-For more details about the GPIO layout, visit the [article](https://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.
diff --git a/source/_redirects b/source/_redirects
index 227f8f2b9a0..3b322cee29a 100644
--- a/source/_redirects
+++ b/source/_redirects
@@ -127,7 +127,6 @@
 /components/binary_sensor.aurora /integrations/aurora
 /components/binary_sensor.axis /integrations/axis#binary-sensor
 /components/binary_sensor.bayesian /integrations/bayesian
-/components/binary_sensor.bbb_gpio /integrations/bbb_gpio#binary-sensor
 /components/binary_sensor.blink /integrations/blink
 /components/binary_sensor.bloomsky /integrations/bloomsky#binary-sensor
 /components/binary_sensor.bmw_connected_drive /integrations/bmw_connected_drive
@@ -925,7 +924,6 @@
 /components/switch.anel_pwrctrl /integrations/anel_pwrctrl
 /components/switch.aqualogic /integrations/aqualogic#switch
 /components/switch.arest /integrations/arest#switch
-/components/switch.bbb_gpio /integrations/bbb_gpio#switch
 /components/switch.broadlink /integrations/broadlink#switch
 /components/switch.danfoss_air /integrations/danfoss_air#switch
 /components/switch.deconz /integrations/deconz#switch
@@ -1125,7 +1123,6 @@
 /components/azure_event_hub /integrations/azure_event_hub
 /components/baidu /integrations/baidu
 /components/bayesian /integrations/bayesian
-/components/bbb_gpio /integrations/bbb_gpio
 /components/bbox /integrations/bbox
 /components/beewi_smartclim /integrations/beewi_smartclim
 /components/binary_sensor /integrations/binary_sensor
@@ -2352,6 +2349,10 @@
 /components/gntp /more-info/removed-integration 301
 /components/notify.gntp /more-info/removed-integration 301
 /integrations/gntp /more-info/removed-integration 301
+/components/bbb_gpio /more-info/removed-integration 301
+/components/binary_sensor.bbb_gpio /more-info/removed-integration 301
+/components/switch.bbb_gpio /more-info/removed-integration 301
+/integrations/bbb_gpio /more-info/removed-integration 301
 /components/bh1750 /more-info/removed-integration 301
 /components/sensor.bh1750 /more-info/removed-integration 301
 /integrations/bh1750 /more-info/removed-integration 301