Bump python-synology to 0.4.0 : Add support for DSM v5 + fix sensors unknown for 15 min

Update synologydsm.markdown
This commit is contained in:
Quentame 2020-01-27 22:41:05 +01:00 committed by GitHub
commit e089eac8e9
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -50,6 +50,10 @@ password:
description: The password of the user to connect to the Synology NAS.
required: true
type: string
api_version:
description: Define DSM version to allow backward compatibility with 5.x. Value can be `5` for DSM 5.x or `6` for DSM 6.x or later.
type: integer
required: false
ssl:
description: Determine if HTTPS should be used.
required: false
@ -109,9 +113,9 @@ monitored_conditions:
disk_status:
description: Displays the status of the hard disk (creates a new entry for each disk).
disk_exceed_bad_sector_thr:
description: Displays true / false to indicate if the hard disk exceeded the maximum bad sector threshold (creates a new entry for each disk).
description: Displays true / false to indicate if the hard disk exceeded the maximum bad sector threshold (creates a new entry for each disk). (Does not work with DSM 5.x)
disk_below_remain_life_thr:
description: Displays true / false to indicate if the hard disk dropped below the remain life threshold (creates a new entry for each disk).
description: Displays true / false to indicate if the hard disk dropped below the remain life threshold (creates a new entry for each disk). (Does not work with DSM 5.x)
disk_temp:
description: Displays the temperature of the hard disk (creates a new entry for each disk, uses the unit_system to display in C or F).
volume_status:
@ -130,9 +134,6 @@ monitored_conditions:
description: Displays the maximum temperature of all disks in the volume (creates a new entry for each volume).
{% endconfiguration %}
<div class='note'>
After booting Home Assistant it can take up to 15 minutes for the sensors to show up. This is due to the fact that sensors are created after Home Assistant has fully been initialized.
</div>
<div class='note warning'>
This sensor will wake up your Synology NAS if it's in hibernation mode.