From e0922437fcad253d35911a2c0714ed42679c3719 Mon Sep 17 00:00:00 2001 From: Ardetus Date: Sun, 9 Oct 2016 21:47:23 +0300 Subject: [PATCH] Update description of onewire bus parameter (#1200) --- source/_components/sensor.onewire.markdown | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/source/_components/sensor.onewire.markdown b/source/_components/sensor.onewire.markdown index b69a7051494..5595f7a3607 100644 --- a/source/_components/sensor.onewire.markdown +++ b/source/_components/sensor.onewire.markdown @@ -17,12 +17,12 @@ The `onewire` platform supports sensors which are using the One wire (1-wire) bu Supported devices: - [DS18B20](https://datasheets.maximintegrated.com/en/ds/DS18B20.pdf) -- DS18S20 -- DS1822 -- DS1825 -- DS28EA00 temperature sensors +- [DS18S20](https://www.maximintegrated.com/en/products/analog/sensors-and-sensor-interface/DS18S20.html) +- [DS1822](https://datasheets.maximintegrated.com/en/ds/DS1822.pdf) +- [DS1825](https://datasheets.maximintegrated.com/en/ds/DS1825.pdf) +- [DS28EA00](https://datasheets.maximintegrated.com/en/ds/DS28EA00.pdf) temperature sensors -There is also support for bus masters which use fuse to mount device tree. +The 1-Wire bus can be connected directly to the IO pins of Raspberry Pi or using dedicated interface adapter (e.g [DS9490R](https://datasheets.maximintegrated.com/en/ds/DS9490-DS9490R.pdf)). When an interface adapter is used, sensors can be accessed on Linux hosts via [owfs 1-Wire file system](http://owfs.org/). When using an interface adapter and the owfs, the 'mount_dir' option must be configured to correspond a directory, where owfs device tree has been mounted. If you are using Raspberry Pi and IO pin connected bus setup, don't use the 'mount_dir' option. To enable One wire sensors in your installation, add the following to your `configuration.yaml` file: