diff --git a/source/_integrations/dynalite.markdown b/source/_integrations/dynalite.markdown
index f5dd81be41e..29ba8af3f64 100755
--- a/source/_integrations/dynalite.markdown
+++ b/source/_integrations/dynalite.markdown
@@ -5,6 +5,7 @@ ha_category:
   - Hub
   - Light
   - Switch
+  - Cover
 ha_iot_class: Local Push
 ha_release: 0.106
 ha_codeowners:
@@ -13,12 +14,13 @@ ha_config_flow: true
 ha_domain: dynalite
 ---
 
-Philips Dynalite support is integrated into Home Assistant as a hub that can drive the light and switch platforms. 
+Philips Dynalite support is integrated into Home Assistant as a hub that can drive the light, switch, and cover platforms. 
 
 There is currently support for the following device types within Home Assistant:
 
 - Lights
 - Switches
+- Covers
 
 A Philips Dynalite hub connects to the Dynet network, which is composed of areas, channels, and preset. 
 
@@ -92,6 +94,16 @@ area:
           description: Name of the area.
           required: true
           type: string
+        template:
+          description: "Type of template to use for the area. Supported values are: `room` and `time_cover`. They are described in detail below in the **template** section. If the template parameters are different than defaults, they can be overridden in this section as well."
+          require: false
+          type: string
+          default: No template
+        TEMPLATE_PARAMS:
+          description: "This can be any of the settings of the template. For example, for template `room`: `room_on` and `room_off` are possible options."
+          required: false
+          type: [integer, float]
+          default: Value from **template** section or system defaults
         fade:
           description: Fade time for the area, in seconds.
           required: false
@@ -138,7 +150,7 @@ area:
                   type: string
                   default: AREA_NAME Channel CHANNEL_NUMBER
                 type:
-                  description: "Type of entity this should appear as. Can be either `light` or if this is a device that is not a light (e.g., water heater), can be `switch`."
+                  description: "Type of entity this channel should appear as. Can be either `light` or if this is a device that is not a light (e.g., water heater), can be `switch`."
                   require: false
                   type: string
                   default: light
@@ -167,6 +179,66 @@ preset:
           required: false
           type: float
           default: 2.0
+template:
+  description: Set the default parameters for the templates.
+  required: false
+  type: map
+  keys:
+    room:
+      description: This is used to define a room that has a preset to turn on all the channels in the area and a preset to turn off.
+      required: false
+      type: map
+      keys:
+        room_on:
+          description: Preset to turn area on.
+          required: false
+          type: integer
+          default: 1
+        room_off:
+          description: Preset to turn area off.
+          required: false
+          type: integer
+          default: 4
+    time_cover:
+      description: "This is used to define a cover that has 3 presets: `open`, `close`, and `stop`. Potentially can also use a channel that some systems (e.g., Control4) use to also send commands to open and close the cover. It uses the duration it takes to open or close to determine position. In addition, many times, these covers include tilt by opening or closing for a short time, so this can be defined as well."
+      required: false
+      type: map
+      keys:
+        open:
+          description: Preset to open the cover.
+          required: false
+          type: integer
+          default: 1
+        close:
+          description: Preset to close the cover.
+          required: false
+          type: integer
+          default: 2
+        stop:
+          description: Preset to stop the cover.
+          required: false
+          type: integer
+          default: 4
+        channel_cover:
+          description: Channel that monitors the cover.
+          required: false
+          type: integer
+          default: No channel
+        duration:
+          description: Time in seconds it takes to open or close the cover.
+          required: false
+          type: integer
+          default: 60
+        tilt:
+          description: "Time in seconds it takes to open or close the cover tilt. `0` means that the cover does not support tilt."
+          require: false
+          type: integer
+          default: 0
+        class:
+          description: "Type of cover for Home Assistant. Any of the possible [cover classes](/integrations/cover/#device-class) (e.g. `blind`, `garage`, `shutter`) are possible."
+          require: false
+          type: string
+          default: shutter
 {% endconfiguration %}
 
 ## Examples
@@ -182,9 +254,13 @@ dynalite:
       area:
         '1':
           name: Office
+          template: room
         '2':
           name: Living Room
+          template: room
           nodefault: true
+          room_on: 2
+          room_off: 5
           channel:
             '2': 
               name: Entrance Spot
@@ -197,11 +273,18 @@ dynalite:
             '6':
               name: All Off
               fade: 3.0
+        '4':
+          name: Curtain
+          template: time_cover
       preset:
         '1':
           name: 'On'
         '4':
           name: 'Off'
+      template:
+        room:
+          room_on: 1
+          room_off: 4
 ```
 
 ## Initial configuration and discovery