Merge branch 'current' into next

This commit is contained in:
Franck Nijhof 2023-10-04 19:56:57 +02:00
commit e54227663a
No known key found for this signature in database
GPG Key ID: D62583BA8AB11CA3
65 changed files with 2215 additions and 70 deletions

View File

@ -22,7 +22,8 @@ source/_integrations/airly.markdown @bieniu
source/_integrations/airnow.markdown @asymworks
source/_integrations/airq.markdown @Sibgatulin @dl2080
source/_integrations/airthings.markdown @danielhiversen
source/_integrations/airthings_ble.markdown @vincegio
source/_integrations/airthings_ble.markdown @vincegio @LaStrada
source/_integrations/airtouch4.markdown @samsinnamon
source/_integrations/airvisual.markdown @bachya
source/_integrations/airvisual_pro.markdown @bachya
source/_integrations/airzone.markdown @Noltari
@ -120,6 +121,7 @@ source/_integrations/cisco_webex_teams.markdown @fbradyirl
source/_integrations/climate.markdown @home-assistant/core
source/_integrations/cloud.markdown @home-assistant/cloud
source/_integrations/cloudflare.markdown @ludeeus @ctalkington
source/_integrations/co2signal.markdown @jpbede
source/_integrations/coinbase.markdown @tombrien
source/_integrations/color_extractor.markdown @GenericStudent
source/_integrations/comed.markdown @tronikos
@ -180,6 +182,7 @@ source/_integrations/dwd_weather_warnings.markdown @runningman84 @stephan192 @an
source/_integrations/dynalite.markdown @ziv1234
source/_integrations/easyenergy.markdown @klaasnicolaas
source/_integrations/ecobee.markdown @marthoc @marcolivierarsenault
source/_integrations/ecoforest.markdown @pjanuario
source/_integrations/econet.markdown @vangorra @w1ll1am23
source/_integrations/ecovacs.markdown @OverloadUT @mib1185
source/_integrations/ecowitt.markdown @pvizeli
@ -201,6 +204,7 @@ source/_integrations/energie_vanons.markdown @klaasnicolaas
source/_integrations/energy.markdown @home-assistant/core
source/_integrations/energyzero.markdown @klaasnicolaas
source/_integrations/enigma2.markdown @fbradyirl
source/_integrations/enmax.markdown @tronikos
source/_integrations/enocean.markdown @bdurrer
source/_integrations/enphase_envoy.markdown @bdraco @cgarwood @dgomes @joostlek
source/_integrations/entur_public_transport.markdown @hfurubotten
@ -212,7 +216,7 @@ source/_integrations/epsonworkforce.markdown @ThaStealth
source/_integrations/eq3btsmart.markdown @rytilahti
source/_integrations/escea.markdown @lazdavila
source/_integrations/esera_onewire.markdown @garbled1 @epenet
source/_integrations/esphome.markdown @OttoWinter @jesserockz @bdraco
source/_integrations/esphome.markdown @OttoWinter @jesserockz @kbx81 @bdraco
source/_integrations/eufylife_ble.markdown @bdr99
source/_integrations/event.markdown @home-assistant/core
source/_integrations/evergy.markdown @tronikos
@ -230,6 +234,7 @@ source/_integrations/filter.markdown @dgomes
source/_integrations/fire_tv.markdown @JeffLIrion @ollo69
source/_integrations/fireservicerota.markdown @cyberjunky
source/_integrations/firmata.markdown @DaAwesomeP
source/_integrations/fitbit.markdown @allenporter
source/_integrations/fivem.markdown @Sander0542
source/_integrations/fjaraskupan.markdown @elupus
source/_integrations/flexom.markdown @imicknl @vlebourl @tetienne @nyroDev
@ -237,7 +242,7 @@ source/_integrations/flick_electric.markdown @ZephireNZ
source/_integrations/flipr.markdown @cnico
source/_integrations/flo.markdown @dmulcahey
source/_integrations/flume.markdown @ChrisMandich @bdraco @jeeftor
source/_integrations/flux_led.markdown @icemanch @bdraco
source/_integrations/flux_led.markdown @icemanch
source/_integrations/forecast_solar.markdown @klaasnicolaas @frenck
source/_integrations/forked_daapd.markdown @uvjustin
source/_integrations/fortios.markdown @kimfrellsen
@ -307,6 +312,7 @@ source/_integrations/home_connect.markdown @DavidMStraub
source/_integrations/home_plus_control.markdown @chemaaa
source/_integrations/homeassistant.markdown @home-assistant/core
source/_integrations/homeassistant_alerts.markdown @home-assistant/core
source/_integrations/homeassistant_green.markdown @home-assistant/core
source/_integrations/homeassistant_hardware.markdown @home-assistant/core
source/_integrations/homeassistant_sky_connect.markdown @home-assistant/core
source/_integrations/homeassistant_yellow.markdown @home-assistant/core
@ -330,6 +336,7 @@ source/_integrations/iammeter.markdown @lewei50
source/_integrations/iaqualink.markdown @flz
source/_integrations/ibeacon.markdown @bdraco
source/_integrations/icloud.markdown @Quentame @nzapponi
source/_integrations/idasen_desk.markdown @abmantis
source/_integrations/ign_sismologia.markdown @exxamalte
source/_integrations/image.markdown @home-assistant/core
source/_integrations/image_processing.markdown @home-assistant/core
@ -396,7 +403,6 @@ source/_integrations/leviton_z_wave.markdown @home-assistant/z-wave
source/_integrations/lg_netcast.markdown @Drafteed
source/_integrations/lidarr.markdown @tkdrob
source/_integrations/life360.markdown @pnbruckner
source/_integrations/lifx.markdown @bdraco
source/_integrations/light.markdown @home-assistant/core
source/_integrations/linux_battery.markdown @fabaff
source/_integrations/litejet.markdown @joncar
@ -408,6 +414,7 @@ source/_integrations/lock.markdown @home-assistant/core
source/_integrations/logbook.markdown @home-assistant/core
source/_integrations/logger.markdown @home-assistant/core
source/_integrations/logi_circle.markdown @evanjd
source/_integrations/london_underground.markdown @jpbede
source/_integrations/lookin.markdown @ANMalko @bdraco
source/_integrations/loqed.markdown @mikewoudenberg
source/_integrations/luci.markdown @mzdrale
@ -420,9 +427,11 @@ source/_integrations/lyric.markdown @timmo001
source/_integrations/marantz.markdown @ol-iver @starkillerOG
source/_integrations/martec.markdown @starkillerOG
source/_integrations/mastodon.markdown @fabaff
source/_integrations/matrix.markdown @PaarthShah
source/_integrations/matter.markdown @home-assistant/matter
source/_integrations/mazda.markdown @bdr99
source/_integrations/meater.markdown @Sotolotl @emontnemery
source/_integrations/medcom_ble.markdown @elafargue
source/_integrations/media_extractor.markdown @joostlek
source/_integrations/media_player.markdown @home-assistant/core
source/_integrations/media_source.markdown @hunterjm
@ -444,7 +453,7 @@ source/_integrations/minecraft_server.markdown @elmurato
source/_integrations/minio.markdown @tkislan
source/_integrations/moat.markdown @bdraco
source/_integrations/mobile_app.markdown @home-assistant/core
source/_integrations/modbus.markdown @adamchengtkc @janiversen @vzahradnik
source/_integrations/modbus.markdown @janiversen
source/_integrations/modem_callerid.markdown @tkdrob
source/_integrations/modern_forms.markdown @wonderslug
source/_integrations/moehlenhoff_alpha2.markdown @j-a-n
@ -459,7 +468,7 @@ source/_integrations/msteams.markdown @peroyvind
source/_integrations/mullvad.markdown @meichthys
source/_integrations/mutesync.markdown @currentoor
source/_integrations/my.markdown @home-assistant/core
source/_integrations/myq.markdown @ehendrix23
source/_integrations/myq.markdown @ehendrix23 @Lash-L
source/_integrations/mysensors.markdown @MartinHjelmare @functionpointer
source/_integrations/mystrom.markdown @fabaff
source/_integrations/nam.markdown @bieniu
@ -550,6 +559,7 @@ source/_integrations/plum_lightpad.markdown @ColinHarrington @prystupa
source/_integrations/point.markdown @fredrike
source/_integrations/poolsense.markdown @haemishkyd
source/_integrations/powerwall.markdown @bdraco @jrester @daniel-simpson
source/_integrations/private_ble_device.markdown @Jc2k
source/_integrations/profiler.markdown @bdraco
source/_integrations/progettihwsw.markdown @ardaseremet
source/_integrations/prometheus.markdown @knyar
@ -610,7 +620,7 @@ source/_integrations/roon.markdown @pavoni
source/_integrations/rpi_power.markdown @shenxn @swetoast
source/_integrations/rss_feed_template.markdown @home-assistant/core
source/_integrations/rtsp_to_webrtc.markdown @allenporter
source/_integrations/ruckus_unleashed.markdown @gabe565 @lanrat
source/_integrations/ruckus_unleashed.markdown @lanrat @ms264556 @gabe565
source/_integrations/ruuvi_gateway.markdown @akx
source/_integrations/ruuvitag_ble.markdown @akx
source/_integrations/rympro.markdown @OnFreund @elad-bar @maorcc
@ -657,7 +667,7 @@ source/_integrations/siren.markdown @home-assistant/core @raman325
source/_integrations/sisyphus.markdown @jkeljo
source/_integrations/sky_hub.markdown @rogerselwyn
source/_integrations/skybell.markdown @tkdrob
source/_integrations/slack.markdown @tkdrob
source/_integrations/slack.markdown @tkdrob @fletcherau
source/_integrations/sleepiq.markdown @mfugate1 @kbickar
source/_integrations/slide.markdown @ualex73
source/_integrations/slimproto.markdown @marcelveldt
@ -688,7 +698,7 @@ source/_integrations/spaceapi.markdown @fabaff
source/_integrations/speedtestdotnet.markdown @rohankapoorcom @engrbm87
source/_integrations/spider.markdown @peternijssen
source/_integrations/splunk.markdown @Bre77
source/_integrations/spotify.markdown @frenck
source/_integrations/spotify.markdown @frenck @joostlek
source/_integrations/sql.markdown @gjohansson-ST @dougiteixeira
source/_integrations/squeezebox.markdown @rajlaud
source/_integrations/srp_energy.markdown @briglx
@ -713,6 +723,7 @@ source/_integrations/switch.markdown @home-assistant/core
source/_integrations/switch_as_x.markdown @home-assistant/core
source/_integrations/switchbee.markdown @jafar-atili
source/_integrations/switchbot.markdown @danielhiversen @RenierM26 @murtas @Eloston @dsypniewski
source/_integrations/switchbot_cloud.markdown @SeraphicRav
source/_integrations/switcher_kis.markdown @thecode
source/_integrations/switchmate.markdown @danielhiversen @qiz-li
source/_integrations/symfonisk.markdown @cgtobi @jjlawren
@ -757,10 +768,11 @@ source/_integrations/trafikverket_ferry.markdown @gjohansson-ST
source/_integrations/trafikverket_train.markdown @endor-force @gjohansson-ST
source/_integrations/trafikverket_weatherstation.markdown @endor-force @gjohansson-ST
source/_integrations/transmission.markdown @engrbm87 @JPHutchins
source/_integrations/trend.markdown @jpbede
source/_integrations/tts.markdown @home-assistant/core @pvizeli
source/_integrations/tuya.markdown @Tuya @zlinoliver @frenck
source/_integrations/twentemilieu.markdown @frenck
source/_integrations/twinkly.markdown @dr1rrb @Robbie1221
source/_integrations/twinkly.markdown @dr1rrb @Robbie1221 @Olen
source/_integrations/twitch.markdown @joostlek
source/_integrations/ubiwizz.markdown @imicknl @vlebourl @tetienne @nyroDev
source/_integrations/ukraine_alarm.markdown @PaulAnnekov
@ -782,10 +794,10 @@ source/_integrations/vacuum.markdown @home-assistant/core
source/_integrations/vallox.markdown @andre-richter @slovdahl @viiru-
source/_integrations/velbus.markdown @Cereal2nd @brefra
source/_integrations/velux.markdown @Julius2342
source/_integrations/venstar.markdown @garbled1
source/_integrations/verisure.markdown @frenck @niro1987
source/_integrations/venstar.markdown @garbled1 @jhollowe
source/_integrations/verisure.markdown @frenck
source/_integrations/vermont_castings.markdown @jeeftor
source/_integrations/versasense.markdown @flamm3blemuff1n
source/_integrations/versasense.markdown @imstevenxyz
source/_integrations/version.markdown @ludeeus
source/_integrations/vesync.markdown @markperdue @webdjoe @thegardenmonkey
source/_integrations/vilfo.markdown @ManneW
@ -800,12 +812,13 @@ source/_integrations/volvooncall.markdown @molobrakos
source/_integrations/vulcan.markdown @Antoni-Czaplicki
source/_integrations/wake_on_lan.markdown @ntilley905
source/_integrations/wallbox.markdown @hesselonline
source/_integrations/waqi.markdown @andrey-git
source/_integrations/waqi.markdown @joostlek
source/_integrations/water_heater.markdown @home-assistant/core
source/_integrations/watson_tts.markdown @rutkai
source/_integrations/watttime.markdown @bachya
source/_integrations/waze_travel_time.markdown @eifinger
source/_integrations/weather.markdown @home-assistant/core
source/_integrations/weatherkit.markdown @tjhorner
source/_integrations/webhook.markdown @home-assistant/core
source/_integrations/webostv.markdown @thecode
source/_integrations/websocket_api.markdown @home-assistant/core
@ -816,7 +829,7 @@ source/_integrations/whois.markdown @frenck
source/_integrations/wiffi.markdown @mampfes
source/_integrations/wilight.markdown @leofig-rj
source/_integrations/wirelesstag.markdown @sergeymaysak
source/_integrations/withings.markdown @vangorra
source/_integrations/withings.markdown @vangorra @joostlek
source/_integrations/wiz.markdown @sbidy
source/_integrations/wled.markdown @frenck
source/_integrations/wolflink.markdown @adamkrol93

View File

@ -109,9 +109,9 @@ social:
# Home Assistant release details
current_major_version: 2023
current_minor_version: 9
current_patch_version: 3
date_released: 2023-09-24
current_minor_version: 10
current_patch_version: 0
date_released: 2023-10-04
# Either # or the anchor link to latest release notes in the blog post.
# Must be prefixed with a # and have double quotes around it.

View File

@ -1,4 +1,10 @@
{% capture name %}{{ include.name | default: page.title }}{% endcapture %}
{% capture domain %}{{ include.domain | default: page.ha_domain }}{% endcapture %}
**Building block integration**: The {{ name | downcase }} integration cannot be directly used. You cannot create your own {{ domain }} entities using this integration. This integration is a building block for other integrations to use, enabling them to create {{ domain }} entities for you.
<div class='note info'>
**Building block integration**
The {{ name | downcase }} integration cannot be directly used. You cannot create your own {{ domain | replace: "_", " " }} entities using this integration. This integration is a building block for other integrations to use, enabling them to create {{ domain | replace: "_", " " }} entities for you.
</div>

View File

@ -9,6 +9,7 @@ ha_domain: aftership
ha_platforms:
- sensor
ha_integration_type: integration
ha_config_flow: true
---
The `aftership` platform allows one to track deliveries by [AfterShip](https://www.aftership.com), a service that supports 490+ couriers worldwide. To use the tracking API functionality, the Essentials plan is required. This plan includes 100 shipments per month. There are various paid-for tiers after that.

View File

@ -25,3 +25,5 @@ The platforms cover the following levels (if they are available):
- The N2O (nitrogen oxide) level.
- The NO (nitrogen monoxide) level.
- The NO2 (nitrogen dioxide) level.
{% include integrations/building_block_integration.md %}

View File

@ -8,6 +8,7 @@ ha_release: '2022.11'
ha_iot_class: Local Polling
ha_codeowners:
- '@vincegio'
- '@LaStrada'
ha_domain: airthings_ble
ha_bluetooth: true
ha_platforms:

View File

@ -10,6 +10,8 @@ ha_domain: airtouch4
ha_platforms:
- climate
ha_integration_type: integration
ha_codeowners:
- '@samsinnamon'
---
The AirTouch 4 integration allows you to control Ducted Air Conditioning Systems that are using the [AirTouch 4](https://www.airtouch.net.au/airtouch/airtouch-4/) Controller. Currently, this integration only supports AirTouch 4 controllers with the Individual Temperature Control (ITC) modules.

View File

@ -8,6 +8,7 @@ ha_iot_class: Cloud Polling
ha_domain: aladdin_connect
ha_platforms:
- cover
- diagnostics
- sensor
ha_integration_type: integration
ha_codeowners:

View File

@ -14,6 +14,9 @@ ha_integration_type: entity
Home Assistant can give you an interface which is similar to a classic alarm system.
Please see [manual alarm](/integrations/manual) or [template alarm](/integrations/alarm_control_panel.template) for alarm configuration.
{% include integrations/building_block_integration.md %}
### Services
Depending on features supported by a specific integration alarm may expose the following services:

View File

@ -25,7 +25,10 @@ Some binary sensors are created automatically when you add a device integration.
For example, adding the [ecobee integration](/integrations/ecobee/) will create
a binary sensor to detect room occupancy. Other binary sensors can be created
manually using the [template integration](/integrations/template/)
or using an [input boolean helper](/integrations/input_boolean),
or using an [input boolean helper](/integrations/input_boolean).
{% include integrations/building_block_integration.md %}
### Device Class

View File

@ -17,8 +17,7 @@ a device or service but remains stateless from the Home Assistant perspective.
It can be compared to a real live momentary switch, push-button, or some other
form of a stateless switch.
The button entities cannot be implemented manually, but can be provided by
other integrations.
{% include integrations/building_block_integration.md %}
## The state of a button

View File

@ -14,19 +14,15 @@ The calendar integration provides calendar entities, allowing other integrations
to integrate calendars into Home Assistant. Calendars are shown on the calendar
dashboard and can be used with automations.
A calendar entity has a state and attributes representing the next event (only).
A calendar trigger is much more flexible, has fewer limitations, and is
recommended for automations instead of using the entity state.
<div class='note'>
Calendar entities are here to be consumed and provided by other integrations.
This page, therefore, does not provide instructions on how to create calendar
This page does not provide instructions on how to create calendar
entities. Please see the ["Calendar" category](/integrations/#calendar) on the
integrations page to find integration offering calendar entities.
</div>
{% include integrations/building_block_integration.md %}
A calendar entity has a state and attributes representing the next event (only).
A calendar trigger is much more flexible, has fewer limitations, and is
recommended for automations instead of using the entity state.
## Viewing and managing calendars

View File

@ -16,6 +16,8 @@ ha_platforms:
The camera integration allows you to use IP cameras with Home Assistant.
{% include integrations/building_block_integration.md %}
### Streaming Video
If your camera supports it, and the [`stream`](/integrations/stream) integration is setup, you will be able to stream your cameras in the frontend and on supported media players.

View File

@ -11,7 +11,9 @@ ha_codeowners:
ha_integration_type: entity
---
The Climate integration allows you to control and monitor HVAC (heating, ventilating, and air conditioning) devices and thermostats.
The climate integration allows you to control and monitor HVAC (heating, ventilating, and air conditioning) devices and thermostats.
{% include integrations/building_block_integration.md %}
## Services

View File

@ -12,7 +12,9 @@ ha_platforms:
- diagnostics
- sensor
ha_config_flow: true
ha_integration_type: integration
ha_integration_type: service
ha_codeowners:
- '@jpbede'
---
The `Electricity Maps` sensor platform (formerly known as CO2Signal) queries the [Electricity Maps](https://www.electricitymaps.com/) API for the CO2 intensity of a specific region. Data can be collected for your home by using the latitude/longitude or a country code. This API uses the same data as <https://app.electricitymaps.com>. Not all countries/regions in the world are supported, so please consult the app to check local availability.

View File

@ -13,6 +13,8 @@ ha_integration_type: entity
Home Assistant can give you an interface to control covers such as rollershutters, blinds, and garage doors.
{% include integrations/building_block_integration.md %}
## Device Class
The way these {% term sensors %} are displayed in the {% term frontend %} can be modified in the [customize section](/docs/configuration/customizing-devices/). The following device classes are supported for covers:

View File

@ -11,9 +11,11 @@ ha_codeowners:
ha_integration_type: entity
---
The Date integration is built for the controlling and monitoring of dates on devices.
The date integration is built for the controlling and monitoring of dates on devices.
Date entities cannot be created manually, but can be provided by other integrations. If you are looking for a way to create a similar entity, please take a look at the [Date/Time helper](/integrations/input_datetime).
{% include integrations/building_block_integration.md %}
If you are looking for a way to create a similar entity, please take a look at the [Date/Time helper](/integrations/input_datetime).
## Services

View File

@ -13,7 +13,9 @@ ha_integration_type: entity
The Date/Time integration is built for the controlling and monitoring of timestamps on devices.
Date/Time entities cannot be implemented manually, but can be provided by other integrations. If you are looking for a way to create a Date/Time entity, please take a look at the [Date/Time helper](/integrations/input_datetime).
{% include integrations/building_block_integration.md %}
If you are looking for a way to create a Date/Time entity, please take a look at the [Date/Time helper](/integrations/input_datetime).
## Services

View File

@ -13,6 +13,8 @@ ha_integration_type: entity
The device tracker allows you to track devices in Home Assistant. This can happen by querying your wireless router or by having applications push location info.
{% include integrations/building_block_integration.md %}
## Configuring a `device_tracker` platform
To get started add the following lines to your `configuration.yaml` (example for Netgear):

View File

@ -13,11 +13,11 @@ ha_codeowners:
- '@cereal2nd'
ha_domain: duotecno
ha_platforms:
- binary_sensor
- climate
- cover
- light
- switch
- binary sensor
ha_integration_type: integration
---

View File

@ -10,7 +10,9 @@ ha_codeowners:
- '@pjanuario'
ha_domain: ecoforest
ha_platforms:
- number
- sensor
- switch
ha_integration_type: integration
---

View File

@ -12,6 +12,7 @@ ha_config_flow: true
ha_codeowners:
- '@OttoWinter'
- '@jesserockz'
- '@kbx81'
- '@bdraco'
ha_domain: esphome
ha_zeroconf: true

View File

@ -17,7 +17,7 @@ These events are stateless. For example, a doorbell does not have a state like b
The event entity can capture these events in the physical world and makes them available in Home Assistant as an entity.
Please note, the event integration cannot be directly used; you cannot create your own event entities using this integration. This integration is a building block for other integrations to use, enabling them to create event entities for you.
{% include integrations/building_block_integration.md %}
## The state of an event entity

View File

@ -11,7 +11,9 @@ ha_codeowners:
ha_integration_type: entity
---
The Fan integration allows you to control and monitor Fan devices.
The fan integration allows you to control and monitor fan devices.
{% include integrations/building_block_integration.md %}
## Services
@ -22,7 +24,7 @@ Available services:
<div class='note'>
Not all fan services may be available for your platform. You can check which services are available for your fan(s) under **Developer Tools** -> **Services**.
Not all fan services may be available for your platform. You can check which services are available for your fan(s) under **Developer Tools** > **Services**.
</div>

View File

@ -9,6 +9,8 @@ ha_domain: fitbit
ha_platforms:
- sensor
ha_integration_type: integration
ha_codeowners:
- '@allenporter'
---
The Fitbit sensor allows you to expose data from [Fitbit](https://fitbit.com/) to Home Assistant.

View File

@ -21,8 +21,6 @@ ha_platforms:
- switch
ha_codeowners:
- '@icemanch'
- '@bdraco'
ha_quality_scale: platinum
ha_config_flow: true
ha_dhcp: true
ha_integration_type: integration

View File

@ -15,6 +15,8 @@ Geolocation aware entities are typically related to events in the real world in
Entities can have associated geolocation coordinates (latitude and longitude) so that they are displayed on the map. The distance from the entity's coordinates to Home Assistant's location can be used for filtering.
{% include integrations/building_block_integration.md %}
## Geolocation trigger
The [Geolocation trigger](/docs/automation/trigger/#geolocation-trigger) can be used in automations triggered by Geolocation entities appearing in or disappearing from zones. The following value must be used as `source` of the trigger depending on which platform is managing the entities:

View File

@ -8,6 +8,7 @@ ha_codeowners:
- '@home-assistant/core'
ha_domain: homeassistant_sky_connect
ha_integration_type: hardware
ha_config_flow: true
---
The Home Assistant SkyConnect integration provides hardware information for the hardware configuration page.

View File

@ -13,6 +13,7 @@ ha_codeowners:
ha_domain: honeywell
ha_platforms:
- climate
- diagnostics
- sensor
ha_integration_type: integration
---

View File

@ -1,5 +1,5 @@
---
title: IKEA IDÅSEN Desk
title: IKEA Idasen Desk
description: Control and monitor your IKEA Idåsen standing desk.
ha_iot_class: Local Push
ha_config_flow: true
@ -11,6 +11,8 @@ ha_bluetooth: true
ha_platforms:
- cover
ha_integration_type: integration
ha_codeowners:
- '@abmantis'
---
The IKEA IDÅSEN integration allows you to connect your IKEA Idåsen motorized desk to Home Assistant, making it possible to control the desk height and also monitor height changes from the physical controller.

View File

@ -72,4 +72,3 @@ Default: Standard (mid sunset to sunrise)
Default: Shafi
Method for adjusting Asr time calcuation, if not specified, it defaults to Shafi.

View File

@ -10,6 +10,7 @@ ha_codeowners:
- '@pnbruckner'
ha_domain: life360
ha_platforms:
- button
- device_tracker
ha_integration_type: integration
---

View File

@ -17,9 +17,6 @@ ha_platforms:
- select
- sensor
ha_integration_type: integration
ha_codeowners:
- '@bdraco'
ha_quality_scale: platinum
ha_dhcp: true
---

View File

@ -9,6 +9,8 @@ ha_domain: london_underground
ha_platforms:
- sensor
ha_integration_type: integration
ha_codeowners:
- '@jpbede'
---
The `london_underground` sensor will display the status of London underground lines, as well as the Overground and DLR.

View File

@ -10,6 +10,8 @@ ha_domain: matrix
ha_platforms:
- notify
ha_integration_type: integration
ha_codeowners:
- '@PaarthShah'
---
This integration allows you to send messages to matrix rooms, as well as to react to messages in matrix rooms. Reacting to commands is accomplished by firing an event when one of the configured commands is triggered.

View File

@ -34,4 +34,4 @@ To limit the load on the Bluetooth radio on the Home Assistant side, the integra
## Sensors
This integration adds a counts-per-minute ("CPM") sensor for each detected Inspector BLE device. See the Inspector BLE manual for how to convert this CPM reading into another unit if desired, which can be done via a custom [template sensor](integrations/template)
This integration adds a counts-per-minute ("CPM") sensor for each detected Inspector BLE device. See the Inspector BLE manual for how to convert this CPM reading into another unit if desired, which can be done via a custom [template sensor](integrations/template)

View File

@ -6,9 +6,7 @@ ha_category:
ha_release: pre 0.7
ha_iot_class: Local Polling
ha_codeowners:
- '@adamchengtkc'
- '@janiversen'
- '@vzahradnik'
ha_domain: modbus
ha_platforms:
- binary_sensor

View File

@ -10,6 +10,7 @@ ha_iot_class: Cloud Polling
ha_config_flow: true
ha_codeowners:
- '@ehendrix23'
- '@Lash-L'
ha_domain: myq
ha_homekit: true
ha_platforms:

View File

@ -17,4 +17,4 @@ ha_integration_type: integration
The `nextbus` sensor will give you the next departure time and associated data from your public transit station/stop. The data comes from [NextBus](https://www.nextbus.com), which provides real time transit data for a number of transit authorities.
{% include integrations/config_flow.md %}
{% include integrations/config_flow.md %}

View File

@ -4,9 +4,9 @@ description: Instructions on how to integrate Renson Endura Delta sensors into H
ha_category:
- Binary Sensor
- Button
- Sensor
- Number
- Fan
- Number
- Sensor
ha_release: 2023.7
ha_iot_class: Local Polling
ha_config_flow: true
@ -16,9 +16,9 @@ ha_domain: renson
ha_platforms:
- binary_sensor
- button
- sensor
- number
- fan
- number
- sensor
ha_integration_type: integration
---

View File

@ -2,9 +2,9 @@
title: Roborock
description: Instructions on how to integrate Roborock vacuums into Home Assistant
ha_category:
- Binary Sensor
- Number
- Select
- Binary Sensor
- Sensor
- Switch
- Time
@ -17,9 +17,9 @@ ha_codeowners:
- '@Lash-L'
ha_domain: roborock
ha_platforms:
- binary_sensor
- diagnostics
- number
- binary_sensor
- select
- sensor
- switch

View File

@ -7,8 +7,9 @@ ha_release: 0.117
ha_iot_class: Local Polling
ha_config_flow: true
ha_codeowners:
- '@gabe565'
- '@lanrat'
- '@ms264556'
- '@gabe565'
ha_domain: ruckus_unleashed
ha_platforms:
- device_tracker

View File

@ -9,6 +9,7 @@ ha_config_flow: true
ha_quality_scale: silver
ha_codeowners:
- '@frenck'
- '@joostlek'
ha_domain: spotify
ha_zeroconf: true
ha_platforms:

View File

@ -1,5 +1,5 @@
---
title: SwitchBot
title: SwitchBot Bluetooth
description: Instructions on how to set up SwitchBot Devices.
ha_category:
- Binary Sensor

View File

@ -13,10 +13,12 @@ ha_domain: system_bridge
ha_quality_scale: silver
ha_platforms:
- binary_sensor
- notify
- sensor
ha_zeroconf: true
ha_integration_type: integration
ha_integration_type: device
---
[System Bridge](https://system-bridge.timmo.dev) is an application that runs on your local machine to share system information via its API/WebSocket. You can also send commands to the device such as opening a URL or sending keyboard keypresses.
## Prerequisites
### Version

View File

@ -11,6 +11,7 @@ ha_domain: todoist
ha_platforms:
- calendar
ha_integration_type: integration
ha_config_flow: true
---
This platform allows you to connect to your [Todoist Projects](https://todoist.com) as [calendar](/integrations/calendar/) entities. A calendar entity will be `on` if you have a task due in that project or `off` if all the tasks in the project are completed or if the project doesn't have any tasks at all. All tasks get updated roughly every 15 minutes.

View File

@ -5,12 +5,14 @@ ha_category:
- Binary Sensor
- Utility
ha_release: 0.28
ha_iot_class: Local Push
ha_iot_class: Calculated
ha_quality_scale: internal
ha_domain: trend
ha_platforms:
- binary_sensor
ha_integration_type: integration
ha_codeowners:
- '@jpbede'
---
The `trend` platform allows you to create sensors which show the trend of

View File

@ -10,7 +10,9 @@ ha_iot_class: Local Polling
ha_codeowners:
- '@dr1rrb'
- '@Robbie1221'
- '@Olen'
ha_platforms:
- diagnostics
- light
ha_dhcp: true
ha_integration_type: integration

View File

@ -11,6 +11,7 @@ ha_platforms:
ha_integration_type: integration
ha_codeowners:
- '@joostlek'
ha_config_flow: true
---
The Twitch integration will allow you to monitor [Twitch](https://www.twitch.tv/) channel status from within Home Assistant and setup automation based on the information.

View File

@ -14,6 +14,7 @@ ha_platforms:
- sensor
ha_codeowners:
- '@garbled1'
- '@jhollowe'
ha_config_flow: true
ha_integration_type: integration
---

View File

@ -14,7 +14,6 @@ ha_iot_class: Cloud Polling
ha_domain: verisure
ha_codeowners:
- '@frenck'
- '@niro1987'
ha_platforms:
- alarm_control_panel
- binary_sensor

View File

@ -9,7 +9,7 @@ ha_category:
- Switch
ha_iot_class: Local Polling
ha_codeowners:
- '@flamm3blemuff1n'
- '@imstevenxyz'
ha_domain: versasense
ha_platforms:
- sensor

View File

@ -14,7 +14,6 @@ ha_platforms:
- button
- device_tracker
- sensor
ha_ssdp: false
ha_integration_type: integration
---

View File

@ -6,11 +6,12 @@ ha_category:
ha_release: 0.34
ha_iot_class: Cloud Polling
ha_codeowners:
- '@andrey-git'
- '@joostlek'
ha_domain: waqi
ha_platforms:
- sensor
ha_integration_type: integration
ha_config_flow: true
---
The `waqi` sensor platform will query [World Air Quality Index](https://aqicn.org/city/beijing/) service to check AQI value for a specific set of locations. The resulting indexes will be added to the Home Assistant as sensor outputs.

View File

@ -3,8 +3,8 @@ title: Apple WeatherKit
description: Instructions on how to set up Apple WeatherKit with Home Assistant.
ha_category:
- Weather
ha_release: "2023.10"
ha_iot_class: "Cloud Polling"
ha_release: '2023.10'
ha_iot_class: Cloud Polling
ha_config_flow: true
ha_codeowners:
- '@tjhorner'

View File

@ -9,6 +9,7 @@ ha_iot_class: Cloud Polling
ha_config_flow: true
ha_codeowners:
- '@vangorra'
- '@joostlek'
ha_domain: withings
ha_platforms:
- binary_sensor

View File

@ -0,0 +1,403 @@
---
layout: post
title: "2023.10: New looks and more tile card features!"
description: "We added more tile card features, added our beautiful new logo, shiny new My Home Assistant buttons, better password manager support, and more!"
date: 2023-10-04 00:00:00
date_formatted: "October 4, 2023"
author: Franck Nijhof
author_twitter: frenck
comments: true
categories:
- Release-Notes
- Core
og_image: /images/blog/2023-10/social.png
---
<a href='/integrations/#version/2023.10'><img src='/images/blog/2023-10/social.png' style='border: 0;box-shadow: none;'></a>
Home Assistant Core 2023.10! 🎉
October! 🎃 It means we've just celebrated our birthday; we are now 10 years old! 🎂 In case you've missed our
[birthday YouTube stream](https://www.youtube.com/watch?v=EmLV6lJLzSU) with all the cool announcements, we've summed it all up in our [10 year Home Assistant blog post](/blog/2023/09/17/10-years-home-assistant/).
Even more exciting news, as this is [Home Assistant's year of the voice](/blog/2022/12/20/year-of-voice/): Chapter 4 of this endeavor has been announced and will be [streamed live on YouTube](https://www.youtube.com/watch?v=YzgYYkOrnhQ) on 12 October 2023, at 12:00 PDT / 21:00 CEST! Be sure to tune in! I've seen some early demos... All I'm going to say is: It is mind-blowing! 🤯
As for this release, because of all of the above, it is a bit smaller than usual in terms of features. I promise that chapter 4 is going to make it all worth it. Yet, it contains tons of updates, bug fixes, and a couple of beautiful new features for the tile card! 🤩
Enjoy the release!
../Frenck
<!--more-->
- [A beautiful updated logo!](#a-beautiful-updated-logo)
- [Brand new My Home Assistant buttons](#brand-new-my-home-assistant-buttons)
- [New tile card features for climate entities](#new-tile-card-features-for-climate-entities)
- [Tile card feature select entities](#tile-card-feature-select-entities)
- [Password managers and Home Assistant](#password-managers-and-home-assistant)
- [Map entity marker options](#map-entity-marker-options)
- [Other noteworthy changes](#other-noteworthy-changes)
- [New integrations](#new-integrations)
- [Integrations now available to set up from the UI](#integrations-now-available-to-set-up-from-the-ui)
- [Need help? Join the community!](#need-help-join-the-community)
- [Breaking changes](#breaking-changes)
- [All changes](#all-changes)
Don't forget to [join our release party live stream on YouTube](https://www.youtube.com/watch?v=-GDonruFfKc)
4 October 2023, at 12:00 PDT / 21:00 CEST!
<lite-youtube videoid="-GDonruFfKc" videotitle="Home Assistant 2023.10 Release Party"></lite-youtube>
## A beautiful updated logo!
In case you've missed it, we have refreshed the Home Assistant logo! 🤩
<img class='no-shadow' src='/images/blog/2023-09-ha10/home-assistant-logo-new.png' alt='The new Home Assistant logo on a gray background.'>
This was done for the [10th anniversary of Home Assistant](/blog/2023/09/17/10-years-home-assistant/), and you can [read all about this iteration in this blog post](/blog/2023/09/17/a-refreshed-logo-for-home-assistant/). You will start seeing this logo in many more places in the upcoming weeks, but, it is already included this release!
<img class='no-shadow' src='/images/blog/2023-10/home-assistant-about.png' alt='Screenshot showing the new logo showing on the about page in the Home Assistant interface.'>
## Brand new My Home Assistant buttons
It is not just the logo that got a facelift; we have beautiful new buttons for [My Home Assistant] as well 🤩.
<center>
<a href="https://my.home-assistant.io" target="_blank"><img class='no-shadow' src='https://my.home-assistant.io/badges/homeassistant.svg' alt='My Home Assistant logo as a button'></a>
</center><br />
If you're unfamiliar with My Home Assistant, it's a free online tool that enables websites, documentation, chat platforms, and blogs to link to places on your Home Assistant server without knowing its address or being exposed to the internet. This ensures your privacy while still allowing a seamless experience.
In our documentation, you'll find those buttons to, for example, add a new integration to your Home Assistant with a single click! Try it yourself! This button below will open up your Home Assistant's interface and show the integrations
you have installed:
<center>
{% my integrations badge %}
</center>
So, if you see these buttons showing up somewhere, you now know what they do! You can easily create your own buttons and links to share on the [create link] page.
[create link]: https://my.home-assistant.io/create-link/
[My Home Assistant]: https://my.home-assistant.io
## New tile card features for climate entities
In the last release, we added [lots of new features for the tile card](/blog/2023/09/06/release-20239/#lots-of-new-tile-features),
including features specifically for controlling your climate devices. This release, we are adding even more!
[@Weissnix4711] contributed a feature that allows you to add buttons for the presets of your climate device to the tile card. Next,[@piitaya] took it a step further: You can now select which presets you want to show and if you want them in a dropdown list instead of a series of buttons.
<img class='no-shadow' src='/images/blog/2023-10/tile-card-climate-presets.png' alt='Screenshot showing the new preset feature of the tile cards in both button and dropdown variants.'>
The screenshot above shows the same tile card, but one with the buttons and one with the dropdown.
In the options for this tile card feature, you'll be given the choice if you
prefer to show icons or if you rather have a dropdown. You can also pick
which presets you want to show/hide.
[@piitaya]: https://github.com/piitaya
[@Weissnix4711]: https://github.com/Weissnix4711
## Tile card feature select entities
But there is more goodness for the tile card. [@piitaya] also added the dropdown from above as a feature for the select entities, allowing you to select an option from a list of options.
<img class='no-shadow' src='/images/blog/2023-10/tile-card-select.png' alt='Screenshot showing the select feature for the tile card in the Home Assistant interface.'>
This feature can be used for any select entity but also your custom dropdown helpers! (also known as `input_select` entities).
## Password managers and Home Assistant
Using a password manager is arguably one of the best things you can do to
improve your online security. But using them with Home Assistant, depending on
which one you have been using, has been a bit of a pain.
If you've been using one of these password managers that had issues with
Home Assistant, you'll be happy to know that this release fixes that!
For example, 1Password now works!
<img class='no-shadow' src='/images/blog/2023-10/home-assistant-works-with-1password.png' alt='Screenshot from the Home Assistant login screen, that show the use of 1Password'>
## Map entity marker options
The [map card](/dashboards/map/) received new options (thanks [@karwosts]!)
for your entity markers that are shown on the map.
You can now choose if you want the entity name to be rendered on the map
or the entity state, but you could also override the name altogether. You could,
for example, show state values, instead of the name, for the entities providing
gas prices, so you can see where the cheapest gas is.
<center>
<img class='no-shadow' src='/images/blog/2023-10/map-features-prices.png' alt='Screenshot of a map card showing gas prices on the map.'>
</center><br />
When centering the map, all entities on the map are taken into account.
However, you can also exclude certain entities (for example,
known outliers) that should not be considered when doing that.
This is currently only available in the YAML configuration of the map card.
See our [documentation for the map card](/dashboards/map/#label_mode) for
more information.
[@karwosts]: https://github.com/karwosts
## Other noteworthy changes
There are many more improvements in this release; here are some of the other
noteworthy changes this release:
- If you are using [ESPHome], you will notice much smaller Home Assistant
backups when you have [the latest version] installed!
- The [HomeKit Bridge] integration now supports media receivers! Thanks, [@bdraco]!
- [@Lash-L] keeps extending the [Roborock] integration.
In this release, water and last cleaned sensors have been added. Sweet!
- [Withings] received lots of love this release, thanks [@joostlek]! It is now
easier to set up and now also works with the [Home Assistant Cloud] webhooks
for push updates!
- [@allenporter] added calendar support to the [Rain Bird](/integrations/rainbird)
integration, allowing you to see your irrigation schedule in Home Assistant!
Nice!
- The [System Bridge] integration now supports notifications! Thanks, [@timmo001]!
- [@alexyao2015] added a button to [Life360] to trigger a poll to update the
location information. Cool!
- The [picture entity card] now has a fit mode option to control how the image
fits into the card. This lets you decide if the image is clipped, fitted,
or stretched into the displayed card. Thanks [@karwosts]!
- It's now easier than ever to collect [Z-Wave] logs for troubleshooting.
Just [enable debug logging](/integrations/zwave_js#how-do-i-access-the-z-wave-logs)!
[@alexyao2015]: https://github.com/alexyao2015
[@allenporter]: https://github.com/allenporter
[@bdraco]: https://github.com/bdraco
[@joostlek]: https://github.com/joostlek
[@karwosts]: https://github.com/karwosts
[@Lash-L]: https://github.com/Lash-L
[@timmo001]: https://github.com/timmo001
[ESPHome]: https://esphome.io
[Home Assistant Cloud]: https://www.nabucasa.com
[HomeKit Bridge]: /integrations/homekit
[Life360]: /integrations/life360
[picture entity card]: /dashboards/picture-entity/
[Roborock]: /integrations/roborock
[System Bridge]: /integrations/system_bridge
[the latest version]: https://esphome.io/changelog/2023.9.0.html#esphome-2023-9-0-27th-september-2023
[Withings]: /integrations/withings
[Z-Wave]: /integrations/zwave_js
## New integrations
We welcome the following new integrations in this release:
- **[Apple WeatherKit]**, added by [@tjhorner]<br />
Track the weather using Apple's WeatherKit API.
- **[Ecoforest]**, added by [@pjanuario]<br />
Monitor and control your Ecoforest fireplace.
- **[IKEA IDÅSEN Desk]**, added by [@abmantis]<br />
Connect and control the height of your IKEA IDÅSEN motorized desk.
- **[Medcom Bluetooth]**, added by [@elafargue]<br />
Integrates your Medcom radiation monitors.
- **[Private BLE Device]**, added by [@Jc2k]<br />
Track your BLE devices that change their MAC address frequently.
- **[SwitchBot Cloud]**, added by [@SeraphicRav]<br />
Control your SwitchBot devices using the SwitchBot Cloud API.
- **[WeatherFlow]**, added by [@jeeftor]<br />
Integrate your WeatherFlow Tempest Weather System.
This release also has a new virtual integration. Virtual integrations are stubs that are handled by other (existing) integrations to help with findability. The following virtual integration has been added:
- **[Enmax Energy]** provided by [Opower]
[@abmantis]: https://github.com/abmantis
[@elafargue]: https://github.com/elafargue
[@Jc2k]: https://github.com/Jc2k
[@jeeftor]: https://github.com/jeeftor
[@pjanuario]: https://github.com/pjanuario
[@SeraphicRav]: https://github.com/SeraphicRav
[@tjhorner]: https://github.com/tjhorner
[Apple WeatherKit]: /integrations/weatherkit
[Ecoforest]: /integrations/ecoforest
[Enmax Energy]: /integrations/enmax
[IKEA IDÅSEN Desk]: /integrations/idasen_desk
[Medcom Bluetooth]: /integrations/medcom_ble
[Opower]: /integrations/opower
[Private BLE Device]: /integrations/private_ble_device
[SwitchBot Cloud]: /integrations/switchbot_cloud
[WeatherFlow]: /integrations/weatherflow
## Integrations now available to set up from the UI
The following integrations are now available via the Home Assistant UI:
- **[AfterShip]**, done by [@joostlek]
- **[Color extractor]**, done by [@joostlek]
- **[Hunter Hydrawise]**, done by [@dknowles2]
- **[NextBus]**, done by [@ViViDboarder]
- **[Todoist]**, done by [@allenporter]
- **[Twitch]**, done by [@joostlek]
- **[World Air Quality Index (WAQI)]**, done by [@joostlek]
[@allenporter]: https://github.com/allenporter
[@dknowles2]: https://github.com/dknowles2
[@joostlek]: https://github.com/joostlek
[@ViViDboarder]: https://github.com/ViViDboarder
[Aftership]: /integrations/aftership
[Color extractor]: /integrations/color_extractor
[Hunter Hydrawise]: /integrations/hydrawise
[NextBus]: /integrations/nextbus
[Todoist]: /integrations/todoist
[Twitch]: /integrations/twitch
[World Air Quality Index (WAQI)]: /integrations/waqi
## Need help? Join the community!
Home Assistant has a great community of users who are all more than willing
to help each other out. So, join us!
Our very active [Discord chat server](/join-chat) is an excellent place to be
at, and don't forget to join our amazing [forums](https://community.home-assistant.io/).
Found a bug or issue? Please report it in our [issue tracker](https://github.com/home-assistant/core/issues),
to get it fixed! Or, check [our help page](/help) for guidance for more
places you can go.
Are you more into email? [Sign-up for our Building the Open Home Newsletter](/newsletter)
to get the latest news about features, things happening in our community and
other news about building an Open Home; straight into your inbox.
## Breaking changes
{% details "HomeKit Bridge" %}
The HomeKit integration now supports media player receivers. HomeKit expects
receivers to be paired in accessory mode. Existing receivers paired in bridge
mode should be re-added in [accessory mode](/integrations/homekit/#accessory-mode).
([@bdraco] - [#100717]) ([documentation](/integrations/homekit))
[@bdraco]: https://github.com/bdraco
[#100717]: https://github.com/home-assistant/core/pull/100717
{% enddetails %}
{% details "Modbus" %}
The `close_comm_on_error` configuration is no longer optional, sockets will
always be closed on error. Therefore, the `close_comm_on_error` is now
deprecated and will be removed in Home Assistant 2024.3.
([@janiversen] - [#99946]) ([documentation](/integrations/modbus))
[@janiversen]: https://github.com/janiversen
[#99946]: https://github.com/home-assistant/core/pull/99946
{% enddetails %}
{% details "MQTT" %}
An MQTT lock with a configured state topic will initialize with state
`unknown` instead of state `unlocked` unless the lock is set to optimistic mode.
MQTT locks set to optimistic mode will still be initialized with
the `unlocked` state. You should check if your automations are affected.
([@jbouwh] - [#100943]) ([documentation](/integrations/mqtt))
[@jbouwh]: https://github.com/jbouwh
[#100943]: https://github.com/home-assistant/core/pull/100943
{% enddetails %}
{% details "NZBGet" %}
The option to set a custom scan interval in NZBGet via the options UI has been
removed. The update interval is now every 5 seconds.
If you want to restore the custom scan interval behavior,
please see [the `homeassistant.update_entity` service](/common-tasks/general/#defining-a-custom-polling-interval).
([@joostlek] - [#98869]) ([documentation](/integrations/nzbget))
[@joostlek]: https://github.com/joostlek
[#98869]: https://github.com/home-assistant/core/pull/98869
{% enddetails %}
{% details "OpenTherm Gateway" %}
Some of the older binary sensors and sensors from the OpenTherm gateway have
been deprecated since January 2021. They have now been removed. Please use
the new binary sensors and sensors that have been created since.
([@joostlek] - [#99712]) ([documentation](/integrations/opentherm_gw))
[@joostlek]: https://github.com/joostlek
[#99712]: https://github.com/home-assistant/core/pull/99712
{% enddetails %}
{% details "Pentair ScreenLogic" %}
Some entity names have changed. The integration will migrate old entities
to new names/IDs. You may have to manually update old entities used
in, for example, your dashboards.
Invalid entities such as "Saturation Index" are removed
if the required equipment is not configured.
([@dieselrabbit] - [#92475]) ([documentation](/integrations/screenlogic))
[@dieselrabbit]: https://github.com/dieselrabbit
[#92475]: https://github.com/home-assistant/core/pull/92475
{% enddetails %}
{% details "Supervisor" %}
The default name given to backups created with the `hassio.full_backup`
and `hassio.partial_backup` services are no longer the UTC date and time the
backup was initiated. Instead, the local date and time are used for the name.
([@jpbede] - [#100959]) ([documentation](/integrations/hassio))
[@jpbede]: https://github.com/jpbede
[#100959]: https://github.com/home-assistant/core/pull/100959
{% enddetails %}
{% details "Z-Wave" %}
Multiple WebSocket commands have been renamed based on [this change in Z-Wave JS](https://zwave-js.github.io/node-zwave-js/#/getting-started/migrating-to-v12?id=renamed-network-heal-to-rebuild-routes).
With this release, you will need to update your zwave-js-server instance.
You must use zwave-js-server `1.32.0` or greater (schema `32`).
- If you use the Z-Wave JS add-on, you need at least version `0.1.91`.
- If you use the Z-Wave JS UI add-on, you need at least version `2.0.0`.
- If you use the Z-Wave JS UI Docker container, you need at least version `9.0.0`.
- If you run your own Docker container or some other installation method,
you will need to update your zwave-js-server instance to at least `1.32.0`.
([@raman325] - [#100833]) ([documentation](/integrations/zwave_js))
[@raman325]: https://github.com/raman325
[#100833]: https://github.com/home-assistant/core/pull/100833
{% enddetails %}
If you are a custom integration developer and want to learn about breaking
changes and new features available for your integration: Be sure to follow our
[developer blog][devblog]. The following are the most notable for this release:
- [Home Assistant is participating in Hacktoberfest 2023!](https://developers.home-assistant.io/blog/2023/10/01/hacktoberfest-2023)
- [New way of excluding state attributes from recording](https://developers.home-assistant.io/blog/2023/09/20/excluding-state-attributes-from-recording)
- [The websocket command entity/source has been modified](https://developers.home-assistant.io/blog/2023/09/12/ws-entity-source-simplified/)
[devblog]: https://developers.home-assistant.io/blog/
## All changes
Of course, there is a lot more in this release. You can find a list of
all changes made here: [Full changelog for Home Assistant Core 2023.10](/changelogs/core-2023.10)

File diff suppressed because it is too large Load Diff

Binary file not shown.

After

Width:  |  Height:  |  Size: 77 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 56 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 59 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 37 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 76 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 50 KiB

View File

@ -277,5 +277,4 @@ toc: true
<sub>1: Backups for Home Assistant Core and Home Assistant Container is provided by the <a href="/integrations/backup" target="_blank"><code>backup</code> integration</a>.</sub>
<sub>2: Backups for Home Assistant Core and Home Assistant Container are either a tool to migrate to HAOS or a completely manual restore of the backup.</sub>
{% include getting-started/next_step.html step="onboarding" link="/getting-started/onboarding" %}
<p></p>