diff --git a/source/_components/climate.zwave.markdown b/source/_components/climate.zwave.markdown
index 6d20fdc01e3..c751b170941 100644
--- a/source/_components/climate.zwave.markdown
+++ b/source/_components/climate.zwave.markdown
@@ -13,10 +13,72 @@ ha_release: 0.17
 ---
 
 
-To get your Z-Wave thermostat or HVAC unit working with Home Assistant, follow the instructions for the general [Z-Wave component](/components/zwave/).
+To get your Z-Wave thermostat or HVAC unit working with Home Assistant, follow the instructions for the general [Z-Wave component](/getting-started/z-wave/).
 
 <p class='note'>
 Thermostats with support for fan modes or different operating modes, will be handled like a HVAC device and will also be detected as one. 
 
-If the thermostat support different operationg modes, you will get one thermostat entity for each mode. These can be hidden with settings using the customize setting in the `configuration.yaml` file.
+If the thermostat support different operating modes, you will get one thermostat entity for each mode. These can be hidden with settings using the customize setting in the `configuration.yaml` file.
 </p>
+
+To enable the climate component for your Z-Wave network, add the following to your `configuration.yaml` file.
+
+```yaml
+climate:
+  platform: zwave
+```
+
+Once enabled, any Z-Wave climate devices will be available to Home Assistant. Multiple entities may be created. The following entities are created for a Remotec ZXT-120.
+
+- **climate.remotec_zxt120_heating_1_id** Allows you to control the connected device. See below for examples.
+- **sensor.remotec_zxt120_temperature_38** A sensor which returns the current temperature set on the attached device.
+
+### {% linkable_title Automating Z-Wave Climate Devices %}
+
+The following examples will instruct a Remotec ZXT-120 to turn the attached device mode to Heating, and set the temperature at 24 degrees after 8pm. Add it to `automation.yaml`.
+
+```yaml
+automation:
+  - alias: Turn on Heater at 8pm
+    trigger:
+      - platform: time
+        after: "20:00:00"
+    action:
+      - service: climate.set_operation_mode
+        entity_id: climate.remotec_zxt120_heating_1_id
+        data:
+          operation_mode: Heat
+      - service: climate.set_temperature
+        entity_id: climate.remotec_zxt120_heating_1_39
+        data:
+          temperature: 24
+```
+
+Generally in Home Assistant you can use the `homeassistant/turn_off` service to turn devices off. For the Remotec ZXT-120, you must instead make a service call like the following.
+
+```yaml
+automation:
+  - alias: Turn off Heater at 9pm
+    trigger:
+      - platform: time
+        after: "21:00:00"
+    action:
+      - service: climate.set_operation_mode
+        entity_id: climate.remotec_zxt120_heating_1_id
+        data:
+          operation_mode: 'Off'
+```
+
+**Note:** In the example above, the word `Off` is encased in single quotes to be valid YAML.
+
+### {% linkable_title Test if it works %}
+
+A simple way to test if your Z-Wave climate device is working is to use <img src='/images/screenshots/developer-tool-services-icon.png' alt='service developer tool icon' class="no-shadow" height="38" /> **Services** from the **Developer Tools**. Choose the applicable Climate service from the list of **Available services:** and enter something like the sample below into  the **Service Data** field and then press **CALL SERVICE**.
+
+```json
+{
+  "entity_id": "climate.remotec_zxt120_heating_1_id",
+  "operation_mode": "Heat"
+}
+```
+