Add SensorPush Cloud integration (#36600)

* Add SensorPush Cloud integration

CODEOWNERS

@@ -764,6 +764,7 @@ source/_integrations/sensor.markdown @home-assistant/core
 source/_integrations/sensorblue.markdown @bdraco
 source/_integrations/sensorpro.markdown @bdraco
 source/_integrations/sensorpush.markdown @bdraco
+source/_integrations/sensorpush_cloud.markdown @sstallion
 source/_integrations/sensoterra.markdown @markruys
 source/_integrations/sentry.markdown @dcramer @frenck
 source/_integrations/senz.markdown @milanmeu

source/_integrations/sensorpush_cloud.markdown

@@ -0,0 +1,57 @@
+---
+title: SensorPush Cloud
+description: Instructions on how to integrate SensorPush Cloud devices into Home Assistant.
+ha_category:
+  - Sensor
+ha_release: 2025.3
+ha_iot_class: Cloud Polling
+ha_codeowners:
+  - '@sstallion'
+ha_domain: sensorpush_cloud
+ha_config_flow: true
+ha_platforms:
+  - sensor
+ha_integration_type: integration
+ha_quality_scale: bronze
+---
+
+Integrates [SensorPush Cloud](https://www.sensorpush.com/) devices into Home Assistant.
+
+## Prerequisites
+
+A [G1 WiFi Gateway](https://www.sensorpush.com/products/p/g1-gateway) is required to make use of the Cloud API. To activate API access, log in to the [Gateway Cloud Dashboard](https://dashboard.sensorpush.com/) and agree to the terms of service.
+
+Sensor entities (temperature, humidity, barometric pressure) will not be available to Home Assistant until you have activated the device with the SensorPush app on iOS or Android.
+
+## Supported devices
+
+- [HT1 Temperature and Humidity Smart Sensor](https://www.sensorpush.com/products/p/ht1)
+- [HT.w Water-Resistant Temperature / Humidity Smart Sensor](https://www.sensorpush.com/products/p/ht-w)
+- [HTP.xw Extreme Accuracy Water-Resistant Temperature / Humidity / Barometric Pressure Smart Sensor](https://www.sensorpush.com/products/p/htp-xw)
+
+{% include integrations/config_flow.md %}
+
+## Sensors
+
+For each device, the following *sensors* are created:
+
+| Sensor                 | Description                                                   |
+| :--------------------- | :------------------------------------------------------------ |
+| `altitude`             | Measures the altitude. (disabled by default)                  |
+| `atmospheric_pressure` | Measures the barometric pressure. (disabled by default)       |
+| `battery_voltage`      | Measures the battery voltage. (disabled by default)           |
+| `dewpoint`             | Measures the dew point. (disabled by default)                 |
+| `humidity`             | Measures the relative humidity.                               |
+| `signal_strength`      | Measures the Bluetooth signal strength. (disabled by default) |
+| `temperature`          | Measures the temperature.                                     |
+| `vapor_pressure`       | Measures the vapor-pressure deficit. (disabled by default)    |
+
+## Known limitations
+
+- `atmospheric_pressure` is not available on HT1 and HT.w series devices.
+
+## Removing the integration
+
+This integration follows standard integration removal. No extra steps are required.
+
+{% include integrations/remove_device_service.md %}