Update UI configuration (#12595)

* Update UI configuration 

Add details on additional Konnected panel behavior settings in the UI

* fix lint

* more lint fixes

* Update source/_integrations/konnected.markdown

Co-Authored-By: Franck Nijhof <frenck@frenck.nl>

* Update source/_integrations/konnected.markdown

Co-Authored-By: Franck Nijhof <frenck@frenck.nl>

* Update source/_integrations/konnected.markdown

Co-Authored-By: Franck Nijhof <frenck@frenck.nl>

Co-authored-by: Franck Nijhof <frenck@frenck.nl>
This commit is contained in:
Kit Klein 2020-04-01 06:48:30 -04:00 committed by GitHub
parent d38d49ea72
commit ec3235d47d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -93,6 +93,16 @@ The settings UI starts by having you configure the general behavior of each zone
**Configure additional states for this zone:** Selecting "No" will complete configuration for the zone and proceed to options for the next zone. Select "Yes" if you need to create additional output states for this zone.
#### Using Settings UI to Configure Additional Panel Behavior
Once all zones are configured you'll be presented with the configuration for additional panel behaviors.
**Blink panel LED on when sending state change:** The desired LED behavior for the panel.
**Override default Home Assistant API host panel URL:** The Konnected Alarm Panel post sensor states back to the Home Assistant API. If this value is unchecked the panel will default postbacks using `base_url` in the `http` component. If you've set `base_url` to an external hostname, then you'll want to check this field and set the **Override API host URL** to your _local_ IP address and port (e.g., `http://192.168.1.101:8123`).
**Override API host URL (optional):** The host info to use if you checked **Override default Home Assistant API host panel URL** in the step above. This is ignored if **Override default Home Assistant API host panel URL** is unchecked.
### YAML Configuration
If you prefer you can utilize a `konnected` section in the `configuration.yaml` file that specifies the Konnected devices on the network and the sensors or actuators attached to them. If using `configuration.yaml` the configuration will be one-time imported when going through the Configuration Flow for the panel. **Note that you must still complete the UI based setup before the integration will be configured and entities created/accessible.**
@ -326,7 +336,7 @@ Konnected runs on an ESP8266 board with the NodeMCU firmware. It is commonly use
### 0.108
- Multiple output states for a zone.
- Multiple output states for a zone. Details on configuring additional panel behaviors via the UI.
### 0.106