Connect ZBT-1 docs: update links to point to dupport page (#39124)

source/_includes/asides/docs_sitemap.html

@@ -278,7 +278,7 @@
   <ul>
     <li><a href="https://support.nabucasa.com/hc/en-us/categories/24638797677853-Home-Assistant-Green">Home Assistant Green {% icon "tabler:external-link" %}</a></li>
     <li><a href="https://yellow.home-assistant.io/">Home Assistant Yellow {% icon "tabler:external-link" %}</a></li>
-    <li><a href="https://connectzbt1.home-assistant.io/">Home Assistant Connect ZBT-1 {% icon "tabler:external-link" %}</a></li>
+    <li><a href="https://support.nabucasa.com/hc/en-us/categories/24734620813469">Home Assistant Connect ZBT-1 {% icon "tabler:external-link" %}</a></li>
     <li><a href="https://voice-pe.home-assistant.io/">Home Assistant Voice Preview Edition {% icon "tabler:external-link" %}</a></li>
   </ul>
 </li>

source/_integrations/homeassistant_sky_connect.markdown

@@ -16,7 +16,7 @@ ha_platforms:
 
 The Home Assistant Connect ZBT-1 integration provides hardware information for the hardware configuration page.
 
-For documentation on the Home Assistant Connect ZBT-1, please visit the [documentation page](https://connectzbt1.home-assistant.io/documentation/).
+For documentation on the Home Assistant Connect ZBT-1, please visit the [documentation page](https://support.nabucasa.com/hc/en-us/categories/24734620813469).
 If you are looking to buy one, please visit the [product page](https://home-assistant.io/connectzbt1)
 
 ## Configuration

source/_integrations/homekit_controller.markdown

@@ -139,7 +139,7 @@ This section describes how to add it via Home Assistant's preferred {% term Thre
   - Make sure the {% term Thread %} network you'd like to use is known by Home Assistant and marked as **Preferred network** in the {% term Thread %} configuration.
   - If you have a Home Assistant Yellow or Connect ZBT-1, you can enable Thread to set up an Open Thread border router and with that a {% term Thread %} network.
     - Documentation on [enabling Thread on Yellow](https://yellow.home-assistant.io/procedures/enable-thread/)
-    - Documentation on [enabling Thread on Connect ZBT-1](https://connectzbt1.home-assistant.io/procedures/enable-thread/)
+    - Documentation on [enabling Thread on Connect ZBT-1](https://support.nabucasa.com/hc/en-us/articles/26124710072861)
 
 #### To add a HomeKit device to a Thread network via Home Assistant
 

source/_integrations/otbr.markdown

@@ -16,7 +16,7 @@ The Open Thread Border Router integration allows calling an Open Thread Border R
 This integration is installed automatically when the **Open Thread Border Router** add-on is installed. For  Home Assistant Yellow or Connect ZBT-1 refer to the following procedures:
 
 - [Enabling Thread on Home Assistant Yellow](https://yellow.home-assistant.io/procedures/enable-thread/)
-- [Enabling Thread on Home Assistant Connect ZBT-1](https://connectzbt1.home-assistant.io/procedures/enable-thread/)
+- [Enabling Thread on Home Assistant Connect ZBT-1](https://support.nabucasa.com/hc/en-us/articles/26124710072861)
 
 Installing this integration manually is an advanced use case, for example if you run your own border router. If you do have such a use case, follow these steps:
 

source/_integrations/thread.markdown

@@ -25,7 +25,7 @@ related:
     title: Adding a Matter device to Home Assistant
   - docs: /integrations/homekit_controller/#adding-a-homekit-device-through-thread
     title: Adding an Apple HomeKit device through Thread
-  - url: https://connectzbt1.home-assistant.io/procedures/enable-thread/
+  - url: https://support.nabucasa.com/hc/en-us/articles/26124710072861
     title: Enabling Thread on Connect ZBT-1
   - url: https://yellow.home-assistant.io/procedures/enable-thread/
     title: Enabling Thread on Yellow
@@ -141,7 +141,7 @@ Follow these steps if you want to turn Home Assistant into a Thread border route
 
 1. To enable Thread support on your Home Assistant Yellow or Connect ZBT-1, you need to install the **OpenThread Border Router** add-on. Follow the corresponding procedure:
    - [Enable Thread on Home Assistant Yellow](https://yellow.home-assistant.io/procedures/enable-thread/).
-   - [Enable Thread on Home Assistant Connect ZBT-1](https://connectzbt1.home-assistant.io/procedures/enable-thread/).
+   - [Enable Thread on Home Assistant Connect ZBT-1](https://support.nabucasa.com/hc/en-us/articles/26124710072861).
 
 2. Make sure the Home Assistant Thread network is defined as preferred network.
    - This should happen automatically, but check to be sure.
@@ -195,7 +195,7 @@ Note: the steps and images here show the process with a Google Thread network. B
 
 5. To enable Thread support on your Home Assistant Yellow or Connect ZBT-1, you need to install the **OpenThread Border Router** add-on. Follow the corresponding procedure:
    - [Enable Thread on Home Assistant Yellow](https://yellow.home-assistant.io/procedures/enable-thread/).
-   - [Enable Thread on Home Assistant Connect ZBT-1](https://connectzbt1.home-assistant.io/procedures/enable-thread/).
+   - [Enable Thread on Home Assistant Connect ZBT-1](https://support.nabucasa.com/hc/en-us/articles/26124710072861).
    - **Result**: The network now shows as the preferred network, joined with the third-party network.
 
    ![image](/images/integrations/thread/thread-ha-preferred.png)

source/connectzbt1/index.html

@@ -203,7 +203,7 @@ frontpage_image: /images/frontpage/feature-zbt1.jpg
   When we launched this device, we announced our intent to release firmware supporting multiprotocol, which allows the device's Silicon Labs chip to connect to both Zigbee and Thread networks with one radio. <br /><br />
   This experimental firmware has been available since December 2022. Through extensive testing, we have found that although it works in some circumstances, it has technical limitations that lead to a worse user experience. We now do not recommend using this firmware, and it will be experimental for the foreseeable future. Instead, we will focus on making sure the dedicated Zigbee and Thread firmwares for Home Assistant Connect ZBT-1 deliver the best experience to users.<br /><br />
   
-  If you currently have the multiprotocol firmware installed but don't actively use it to connect to Thread devices, we recommend that you <a href="https://connectzbt1.home-assistant.io/procedures/disable-multiprotocol/">disable multiprotocol</a>. <br /><br />
+  If you currently have the multiprotocol firmware installed but don't actively use it to connect to Thread devices, we recommend that you <a href="https://support.nabucasa.com/hc/en-us/articles/26124969612445">disable multiprotocol</a>. <br /><br />
   Nothing changes for current users of the multiprotocol firmware who are happy with their experience. The experimental multiprotocol firmware will remain available, but we will not recommend it to new users.
   {% enddetails %}
 
@@ -218,7 +218,7 @@ frontpage_image: /images/frontpage/feature-zbt1.jpg
   1: Relies on the experimental EmberZNet support in Zigbee2MQTT.
 </div>
 <div class="material-card text spaced-card" style="margin-top: 72px;">
-  <a href="https://connectzbt1.home-assistant.io/" target="_blank"
+  <a href="https://support.nabucasa.com/hc/en-us/categories/24734620813469" target="_blank"
   class="documentation-card">
     <div class="content-container">
         <div>