Remove Xiaomi Mijia BLE Temperature and Humidity Sensor (#23532)

source/_integrations/mitemp_bt.markdown

@@ -1,132 +0,0 @@
----
-title: Xiaomi Mijia BLE Temperature and Humidity Sensor
-description: Instructions on how to integrate MiTemp BLE temperature and humidity sensor with Home Assistant.
-ha_category:
-  - DIY
-ha_release: 0.69
-ha_iot_class: Local Polling
-ha_domain: mitemp_bt
-ha_platforms:
-  - sensor
-ha_integration_type: integration
----
-
-The `mitemp_bt` sensor platform allows one to monitor room temperature and humidity. The [Xiaomi Mijia BLE Temperature and Humidity sensor with LCD](https://www.banggood.com/Xiaomi-Mijia-Bluetooth-Thermometer-Hygrometer-with-LCD-Screen-Magnetic-Suction-Wall-Stickers-p-1232396.html) is a small Bluetooth Low Energy device that monitors the room temperature and humidity. As only a single BLE device can be polled at the same time, the library employs locking to make sure this is the case.
-
-## Installation
-
-Depending on the operating system you're running, you have to configure the proper Bluetooth backend on your system:
-
-- On [Home Assistant](/hassio/installation/): `mitemp_bt` will work out of the box as long as the host supports Bluetooth (like the Raspberry Pi does).
-- On a [Home Assistant Container](/docs/installation/docker/): Works out of the box with `--net=host` and properly configured Bluetooth on the host.
-- On other Linux systems:
-  - Preferred solution: Install the `bluepy` and `btlewrap` library (via pip). When using a virtual environment, make sure to use install the library in the right one.
-  - Fallback solution: Install `btlewrap` library (via pip) and `gatttool` via your package manager. Depending on the distribution, the package name might be: `bluez`, `bluetooth` or    `bluez-deprecated`.
-
-## Configuration
-
-Start a scan to determine the MAC addresses of the sensor:
-
-```bash
-$ sudo hcitool lescan
-LE Scan ...
-4C:65:A8:D2:31:7F MJ_HT_V1
-[...]
-```
-
-Or if your distribution is using bluetoothctl:
-
-```bash
-$ bluetoothctl
-[bluetooth]# scan on
-Discovery started
-[CHG] Controller XX:XX:XX:XX:XX:XX Discovering: yes
-[NEW] Device 4C:65:A8:D2:31:7F MJ_HT_V1
-```
-
-Check for `MJ_HT_V1` or similar entries, those are your sensor.
-
-To use your Mi Temperature and Humidity sensor in your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-sensor:
-  - platform: mitemp_bt
-    mac: "xx:xx:xx:xx:xx:xx"
-    monitored_conditions:
-      - temperature
-```
-
-{% configuration %}
-mac:
-  description: The MAC address of your sensor.
-  required: true
-  type: string
-monitored_conditions:
-  description: The parameters that should be monitored.
-  required: false
-  default: [temperature, humidity, battery]
-  type: list
-  keys:
-    temperature:
-      description: Temperature in C at the sensor's location.
-    humidity:
-      description: Humidity level in % at the sensor's location.
-    battery:
-      description: Battery details (in %).
-name:
-  description: The name displayed in the frontend.
-  required: false
-  type: string
-force_update:
-  description: Sends update events even if the value hasn't changed.
-  required: false
-  default: false
-  type: boolean
-median:
-  description: "Sometimes the sensor measurements show spikes. Using this parameter, the poller will report the median of the last 3 (you can also use larger values) measurements. This filters out single spikes. Median: 5 will also filter double spikes. If you never have problems with spikes, `median: 1` will work fine."
-  required: false
-  default: 3
-  type: integer
-timeout:
-  description: Define the timeout value in seconds when polling.
-  required: false
-  default: 10
-  type: integer
-retries:
-  description: Define the number of retries when polling.
-  required: false
-  default: 2
-  type: integer
-cache_value:
-  description: Define cache expiration value in seconds.
-  required: false
-  default: 300
-  type: integer
-adapter:
-  description: "Define the Bluetooth adapter to use. Run `hciconfig` to get a list of available adapters."
-  required: false
-  default: hci0
-  type: string
-{% endconfiguration %}
-
-Note that by default the sensor is only polled once every 5 minutes. This means with the `median: 3` setting will take as least 15 minutes before the sensor will report a value after a Home Assistant restart. Even though the hardware is able to provide new values every second, room temperatures don't change that quickly.
-Reducing polling intervals will have a negative effect on the battery life.
-
-## Full example
-
-A full configuration example could look like the one below:
-
-```yaml
-# Example configuration.yaml entry
-sensor:
-  - platform: mitemp_bt
-    mac: "xx:xx:xx:xx:xx:xx"
-    name: Kids Room Temp
-    force_update: true
-    median: 1
-    monitored_conditions:
-      - temperature
-      - humidity
-      - battery
-```

source/_redirects

@@ -456,6 +456,7 @@
 /integrations/mcp23017 /more-info/removed-integration 301
 /integrations/mhz19 /more-info/removed-integration 301
 /integrations/miflora /integrations/xiaomi_ble
+/integrations/mitemp_bt /integrations/xiaomi_ble
 /integrations/mopar /more-info/removed-integration 301
 /integrations/mpchc /more-info/removed-integration 301
 /integrations/mychevy /more-info/removed-integration 301