From ee75a5b9ade20ee59021b9d393cc636541519c80 Mon Sep 17 00:00:00 2001 From: Franck Nijhof Date: Sat, 12 Mar 2022 17:21:22 +0100 Subject: [PATCH] Remove deprecated PiFace Digital I/O (PFIO) integration (#21822) --- source/_integrations/rpi_pfio.markdown | 124 ------------------------- source/_redirects | 5 +- 2 files changed, 3 insertions(+), 126 deletions(-) delete mode 100644 source/_integrations/rpi_pfio.markdown diff --git a/source/_integrations/rpi_pfio.markdown b/source/_integrations/rpi_pfio.markdown deleted file mode 100644 index 7c9e85a46cf..00000000000 --- a/source/_integrations/rpi_pfio.markdown +++ /dev/null @@ -1,124 +0,0 @@ ---- -title: PiFace Digital I/O (PFIO) -description: Instructions on how to integrate the PiFace Digital I/O module into Home Assistant. -ha_category: - - DIY - - Binary Sensor - - Switch -ha_release: 0.45 -ha_iot_class: Local Push -ha_domain: rpi_pfio -ha_platforms: - - binary_sensor - - switch ---- - -
- -This integration is deprecated and will be removed in Home Assistant Core 2022.4. - -For more information see: [Architectural Decision Record 0019](https://github.com/home-assistant/architecture/blob/master/adr/0019-GPIO.md). - -
- -The `rpi_pfio` integration is the base for all related [PiFace Digital I/O (PFIO)](http://www.piface.org.uk/) platforms in Home Assistant. There is no setup needed for the integration itself; for the platforms, please check their corresponding pages. - -There is currently support for the following device types within Home Assistant: - -- [Binary Sensor](#binary-sensor) -- [Switch](#switch) - -Set the jumpers on the PiFace board for address 0 (JP1: 1-2, JP2: 1-2). - -## Using with the Home Assistant Operating System - -Note that the PiFace Digital 2 uses the Raspberry Pi SPI port, which is disabled by default when using the [Home Assistant Operating System](https://github.com/home-assistant/hassos). -You must mount the SD card on another computer and access the boot partition on the card. Edit the `config.txt` file and add the line `dtparam=spi=on` to the end. - -This should enable SPI when the Home Assistant Operating System is booted to access the PiFace Digital 2 board. - -## Binary Sensor - -The `rpi_pfio` binary sensor platform allows you to read sensor values of the [PiFace Digital I/O](http://www.piface.org.uk/products/piface_digital/) . - -To use your PiFace Digital I/O module in your installation, add the following to your `configuration.yaml` file: - -```yaml -# Example configuration.yaml entry -binary_sensor: - - platform: rpi_pfio - ports: - 0: - name: PIR Office - invert_logic: true - 1: - name: Doorbell - settle_time: 50 -``` - -{% configuration %} -ports: - description: List of used ports. - required: true - type: map - keys: - num: - description: The port number. - required: true - type: map - keys: - name: - description: The port name. - required: true - type: string - settle_time: - description: The time in milliseconds for port debouncing. - required: false - type: integer - default: 20 - invert_logic: - description: If `true`, inverts the output logic to ACTIVE LOW. - required: false - type: boolean - default: "`false` (ACTIVE HIGH)" -{% endconfiguration %} - -## Switch - -The `rpi_pfio` switch platform allows you to control the [PiFace Digital I/O](http://www.piface.org.uk/products/piface_digital/) module. - -To use your PiFace Digital I/O module in your installation, add the following to your `configuration.yaml` file: - -```yaml -# Example configuration.yaml entry -switch: - - platform: rpi_pfio - ports: - 0: - name: Doorlock - invert_logic: true - 1: - name: Light Desk -``` - -{% configuration %} -ports: - description: Array of used ports. - required: true - type: list - keys: - num: - description: Port number. - required: true - type: list - keys: - name: - description: Port name. - required: true - type: string - invert_logic: - description: If true, inverts the output logic to ACTIVE LOW. - required: false - default: false - type: boolean -{% endconfiguration %} diff --git a/source/_redirects b/source/_redirects index f0a12587424..1d8c58ffae2 100644 --- a/source/_redirects +++ b/source/_redirects @@ -184,7 +184,6 @@ /components/binary_sensor.rfxtrx /integrations/rfxtrx#binary-sensors /components/binary_sensor.ring /integrations/ring#binary-sensor /components/binary_sensor.rpi_gpio /integrations/rpi_gpio#binary-sensor -/components/binary_sensor.rpi_pfio /integrations/rpi_pfio#binary-sensor /components/binary_sensor.satel_integra /integrations/satel_integra /components/binary_sensor.sense /integrations/sense /components/binary_sensor.skybell /integrations/skybell#binary-sensor @@ -968,7 +967,6 @@ /components/switch.recswitch /integrations/recswitch /components/switch.rfxtrx /integrations/rfxtrx#switch /components/switch.rpi_gpio /integrations/rpi_gpio#switch -/components/switch.rpi_pfio /integrations/rpi_pfio#switch /components/switch.scsgate /integrations/scsgate#switch /components/switch.skybell /integrations/skybell#switch /components/switch.smappee /integrations/smappee @@ -2372,6 +2370,9 @@ /components/sensor.sensehat /more-info/removed-integration 301 /integrations/sensehat /more-info/removed-integration 301 /integrations/pi4ioe5v9xxxx /more-info/removed-integration 301 +/components/binary_sensor.rpi_pfio /more-info/removed-integration 301 +/components/switch.rpi_pfio /more-info/removed-integration 301 +/integrations/rpi_pfio /more-info/removed-integration 301 /integrations/bmp280 /more-info/removed-integration 301 /components/mcp23017 /more-info/removed-integration 301 /integrations/mcp23017 /more-info/removed-integration 301