mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-21 08:16:53 +00:00
Remove deprecated Enviro pHAT integration (#21815)
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
This commit is contained in:
Franck Nijhof
GitHub
parent
0fd8dc0bcc
commit
efb04a6bae
@ -1,151 +0,0 @@
|
||||
---
|
||||
title: Enviro pHAT
|
||||
description: Instructions on how to integrate the Enviro pHAT within Home Assistant.
|
||||
ha_category:
|
||||
- DIY
|
||||
ha_iot_class: Local Polling
|
||||
ha_release: 0.44
|
||||
ha_domain: envirophat
|
||||
ha_platforms:
|
||||
- sensor
|
||||
---
|
||||
|
||||
<div class='note warning'>
|
||||
|
||||
This integration is deprecated and will be removed in Home Assistant Core 2022.4.
|
||||
|
||||
For more information see: [Architectural Decision Record 0019](https://github.com/home-assistant/architecture/blob/master/adr/0019-GPIO.md).
|
||||
|
||||
</div>
|
||||
|
||||
The `envirophat` sensor platform allows you to display information collected by an [Enviro pHAT](https://shop.pimoroni.com/products/enviro-phat) add-on board for the Raspberry Pi. The board features a wide range of sensors, such as:
|
||||
|
||||
- BMP280 temperature/pressure sensor
|
||||
- TCS3472 light and RGB color sensor with two LEDs for illumination
|
||||
- LSM303D accelerometer/magnetometer sensor
|
||||
- ADS1015 4-channel 3.3v, analog to digital sensor (ADC)
|
||||
|
||||
To add this platform to your installation, add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry,
|
||||
# which is equivalent to the default setup
|
||||
sensor:
|
||||
- platform: envirophat
|
||||
use_led: false
|
||||
display_options:
|
||||
- temperature
|
||||
- pressure
|
||||
- light
|
||||
- light_red
|
||||
- light_green
|
||||
- light_blue
|
||||
- accelerometer_x
|
||||
- accelerometer_y
|
||||
- accelerometer_z
|
||||
- magnetometer_x
|
||||
- magnetometer_y
|
||||
- magnetometer_z
|
||||
- voltage_0
|
||||
- voltage_1
|
||||
- voltage_2
|
||||
- voltage_3
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
display_options:
|
||||
description: List of readings to monitor.
|
||||
required: false
|
||||
default: All the conditions
|
||||
type: list
|
||||
keys:
|
||||
temperature:
|
||||
description: Ambient temperature in Celsius. Since the sensor is close to the Raspberry Pi, that might affect the accuracy of the reading (ie. the Pi might heat up the sensor)
|
||||
pressure:
|
||||
description: Atmospheric pressure in hPa.
|
||||
light:
|
||||
description: Ambient light, as an integer in the 0-65535 range.
|
||||
light_red:
|
||||
description: Red color reading scaled to the ambient light, as an integer in the 0-255 range.
|
||||
light_green:
|
||||
description: Green color reading scaled to the ambient light, as an integer in the 0-255 range.
|
||||
light_blue:
|
||||
description: Blue color reading scaled to the ambient light, as an integer in the 0-255 range.
|
||||
accelerometer_x:
|
||||
description: Accelerometer reading in units of G, along the X axis.
|
||||
accelerometer_y:
|
||||
description: Accelerometer reading in units of G, along the Y axis.
|
||||
accelerometer_z:
|
||||
description: Accelerometer reading in units of G, along the Z axis.
|
||||
magnetometer_x:
|
||||
description: Magnetometer reading, the X component of the raw vector.
|
||||
magnetometer_y:
|
||||
description: Magnetometer reading, the y component of the raw vector.
|
||||
magnetometer_z:
|
||||
description: Magnetometer reading, the z component of the raw vector.
|
||||
voltage_0:
|
||||
description: Voltage reading on Analog In 0 in units of V.
|
||||
voltage_1:
|
||||
description: Voltage reading on Analog In 1 in units of V.
|
||||
voltage_2:
|
||||
description: Voltage reading on Analog In 2 in units of V.
|
||||
voltage_3:
|
||||
description: Voltage reading on Analog In 3 in units of V.
|
||||
use_led:
|
||||
description: Declaring that the on-board LEDs are *not* used for the color measurements thus these readings are based on the ambient light. If the value is set to True, the on-board LEDs will blink whenever a reading is taken.
|
||||
required: false
|
||||
default: false
|
||||
type: boolean
|
||||
{% endconfiguration %}
|
||||
|
||||
### Notes
|
||||
|
||||
#### X, Y, Z axes
|
||||
|
||||
- X is parallel with the long edge of the board
|
||||
- Y is parallel with the short edge of the board
|
||||
- Z is perpendicular to the board
|
||||
|
||||
#### Voltages
|
||||
|
||||
- voltage readings are done in the 0-3.3V range, please do not connect higher voltages than that! See the [Enviro pHAT's getting started guide](https://learn.pimoroni.com/tutorial/sandyj/getting-started-with-enviro-phat) regarding how to make a voltage divider
|
||||
|
||||
### Give the values friendly names & icons
|
||||
|
||||
Add something like the following to your [customize section](/docs/configuration/customizing-devices/):
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
customize:
|
||||
sensor.accelerometer_z:
|
||||
icon: mdi:airplane-landing
|
||||
friendly_name: "Acc Z"
|
||||
sensor.magnetometer_x:
|
||||
icon: mdi:arrow-up-bold-hexagon-outline
|
||||
friendly_name: "Magnetic X"
|
||||
sensor.pressure:
|
||||
icon: mdi:weight
|
||||
friendly_name: "Pressure"
|
||||
```
|
||||
|
||||
### Create groups
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
group:
|
||||
enviro_phat_voltages:
|
||||
name: Enviro pHAT Voltages`
|
||||
entities:
|
||||
- sensor.voltage_0
|
||||
- sensor.voltage_1
|
||||
- sensor.voltage_2
|
||||
- sensor.voltage_3
|
||||
```
|
||||
|
||||
### Enabling the required `i2c-1` device
|
||||
|
||||
Since the Enviro pHAT communicates over I2C, you might also need to make sure that the I2C devices are enabled, by adding or uncommenting the following line in `/boot/config.txt` (see the [DT Parameters section](https://www.raspberrypi.org/documentation/configuration/device-tree.md) in the Raspberry Pi documentation):
|
||||
|
||||
```txt
|
||||
dtparam=i2c_arm=on
|
||||
```
|
||||
@ -678,7 +678,6 @@
|
||||
/components/sensor.enocean /integrations/enocean#sensor
|
||||
/components/sensor.enphase_envoy /integrations/enphase_envoy
|
||||
/components/sensor.entur_public_transport /integrations/entur_public_transport
|
||||
/components/sensor.envirophat /integrations/envirophat
|
||||
/components/sensor.envisalink /integrations/envisalink
|
||||
/components/sensor.etherscan /integrations/etherscan
|
||||
/components/sensor.fail2ban /integrations/fail2ban
|
||||
@ -1266,7 +1265,6 @@
|
||||
/components/enphase_envoy /integrations/enphase_envoy
|
||||
/components/entur_public_transport /integrations/entur_public_transport
|
||||
/components/environment_canada /integrations/environment_canada
|
||||
/components/envirophat /integrations/envirophat
|
||||
/components/envisalink /integrations/envisalink
|
||||
/components/ephember /integrations/ephember
|
||||
/components/epson /integrations/epson
|
||||
@ -2364,6 +2362,9 @@
|
||||
/components/light.piglow /more-info/removed-integration 301
|
||||
/components/piglow /more-info/removed-integration 301
|
||||
/integrations/piglow /more-info/removed-integration 301
|
||||
/components/envirophat /more-info/removed-integration 301
|
||||
/components/sensor.envirophat /more-info/removed-integration 301
|
||||
/integrations/envirophat /more-info/removed-integration 301
|
||||
/components/sensor.dht /more-info/removed-integration 301
|
||||
/integrations/dht /more-info/removed-integration 301
|
||||
/components/dht /more-info/removed-integration 301
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user