Remove deprecated Enviro pHAT integration (#21815)

Co-authored-by: Paulus Schoutsen <balloob@gmail.com>

source/_integrations/envirophat.markdown

@@ -1,151 +0,0 @@
----
-title: Enviro pHAT
-description: Instructions on how to integrate the Enviro pHAT within Home Assistant.
-ha_category:
-  - DIY
-ha_iot_class: Local Polling
-ha_release: 0.44
-ha_domain: envirophat
-ha_platforms:
-  - sensor
----
-
-<div class='note warning'>
-
-This integration is deprecated and will be removed in Home Assistant Core 2022.4.
-
-For more information see: [Architectural Decision Record 0019](https://github.com/home-assistant/architecture/blob/master/adr/0019-GPIO.md).
-
-</div>
-
-The `envirophat` sensor platform allows you to display information collected by an [Enviro pHAT](https://shop.pimoroni.com/products/enviro-phat) add-on board for the Raspberry Pi. The board features a wide range of sensors, such as:
-
-- BMP280 temperature/pressure sensor
-- TCS3472 light and RGB color sensor with two LEDs for illumination
-- LSM303D accelerometer/magnetometer sensor
-- ADS1015 4-channel 3.3v, analog to digital sensor (ADC)
-
-To add this platform to your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry,
-# which is equivalent to the default setup
-sensor:
-  - platform: envirophat
-    use_led: false
-    display_options:
-      - temperature
-      - pressure
-      - light
-      - light_red
-      - light_green
-      - light_blue
-      - accelerometer_x
-      - accelerometer_y
-      - accelerometer_z
-      - magnetometer_x
-      - magnetometer_y
-      - magnetometer_z
-      - voltage_0
-      - voltage_1
-      - voltage_2
-      - voltage_3
-```
-
-{% configuration %}
-display_options:
-  description: List of readings to monitor.
-  required: false
-  default: All the conditions
-  type: list
-  keys:
-    temperature:
-      description: Ambient temperature in Celsius. Since the sensor is close to the Raspberry Pi, that might affect the accuracy of the reading (ie. the Pi might heat up the sensor)
-    pressure:
-      description: Atmospheric pressure in hPa.
-    light:
-      description: Ambient light, as an integer in the 0-65535 range.
-    light_red:
-      description: Red color reading scaled to the ambient light, as an integer in the 0-255 range.
-    light_green:
-      description: Green color reading scaled to the ambient light, as an integer in the 0-255 range.
-    light_blue:
-      description: Blue color reading scaled to the ambient light, as an integer in the 0-255 range.
-    accelerometer_x:
-      description: Accelerometer reading in units of G, along the X axis.
-    accelerometer_y:
-      description: Accelerometer reading in units of G, along the Y axis.
-    accelerometer_z:
-      description: Accelerometer reading in units of G, along the Z axis.
-    magnetometer_x:
-      description: Magnetometer reading, the X component of the raw vector.
-    magnetometer_y:
-      description: Magnetometer reading, the y component of the raw vector.
-    magnetometer_z:
-      description: Magnetometer reading, the z component of the raw vector.
-    voltage_0:
-      description: Voltage reading on Analog In 0 in units of V.
-    voltage_1:
-      description: Voltage reading on Analog In 1 in units of V.
-    voltage_2:
-      description: Voltage reading on Analog In 2 in units of V.
-    voltage_3:
-      description: Voltage reading on Analog In 3 in units of V.
-use_led:
-  description: Declaring that the on-board LEDs are *not* used for the color measurements thus these readings are based on the ambient light. If the value is set to True, the on-board LEDs will blink whenever a reading is taken.
-  required: false
-  default: false
-  type: boolean
-{% endconfiguration %}
-
-### Notes
-
-#### X, Y, Z axes
-
-- X is parallel with the long edge of the board
-- Y is parallel with the short edge of the board
-- Z is perpendicular to the board
-
-#### Voltages
-
-- voltage readings are done in the 0-3.3V range, please do not connect higher voltages than that! See the [Enviro pHAT's getting started guide](https://learn.pimoroni.com/tutorial/sandyj/getting-started-with-enviro-phat) regarding how to make a voltage divider
-
-### Give the values friendly names & icons
-
-Add something like the following to your [customize section](/docs/configuration/customizing-devices/):
-
-```yaml
-# Example configuration.yaml entry
-  customize:
-    sensor.accelerometer_z:
-      icon: mdi:airplane-landing
-      friendly_name: "Acc Z"
-    sensor.magnetometer_x:
-      icon: mdi:arrow-up-bold-hexagon-outline
-      friendly_name: "Magnetic X"
-    sensor.pressure:
-      icon: mdi:weight
-      friendly_name: "Pressure"
-```
-
-### Create groups
-
-```yaml
-# Example configuration.yaml entry
-group:
-  enviro_phat_voltages:
-    name: Enviro pHAT Voltages`
-    entities:
-      - sensor.voltage_0
-      - sensor.voltage_1
-      - sensor.voltage_2
-      - sensor.voltage_3
-```
-
-### Enabling the required `i2c-1` device
-
-Since the Enviro pHAT communicates over I2C, you might also need to make sure that the I2C devices are enabled, by adding or uncommenting the following line in `/boot/config.txt` (see the [DT Parameters section](https://www.raspberrypi.org/documentation/configuration/device-tree.md) in the Raspberry Pi documentation):
-
-```txt
-dtparam=i2c_arm=on
-```

source/_redirects

@@ -678,7 +678,6 @@
 /components/sensor.enocean /integrations/enocean#sensor
 /components/sensor.enphase_envoy /integrations/enphase_envoy
 /components/sensor.entur_public_transport /integrations/entur_public_transport
-/components/sensor.envirophat /integrations/envirophat
 /components/sensor.envisalink /integrations/envisalink
 /components/sensor.etherscan /integrations/etherscan
 /components/sensor.fail2ban /integrations/fail2ban
@@ -1266,7 +1265,6 @@
 /components/enphase_envoy /integrations/enphase_envoy
 /components/entur_public_transport /integrations/entur_public_transport
 /components/environment_canada /integrations/environment_canada
-/components/envirophat /integrations/envirophat
 /components/envisalink /integrations/envisalink
 /components/ephember /integrations/ephember
 /components/epson /integrations/epson
@@ -2364,6 +2362,9 @@
 /components/light.piglow /more-info/removed-integration 301
 /components/piglow /more-info/removed-integration 301
 /integrations/piglow /more-info/removed-integration 301
+/components/envirophat /more-info/removed-integration 301
+/components/sensor.envirophat /more-info/removed-integration 301
+/integrations/envirophat /more-info/removed-integration 301
 /components/sensor.dht /more-info/removed-integration 301
 /integrations/dht /more-info/removed-integration 301
 /components/dht /more-info/removed-integration 301